PWB: Difference between revisions
Jump to navigation
Jump to search
(→ZZZ) |
|||
| Line 13: | Line 13: | ||
= Firmware = | = Firmware = | ||
== NIOS terminal == | |||
<pre> | |||
$ ssh agmini@daq16 | |||
$ /opt/intelFPGA/16.1/quartus/bin/jtagconfig | |||
1) USB-Blaster [2-1.2] | |||
02B030DD 5CGTFD7(B5|C5|D5)/5CGXBC7B6/.. | |||
$ /opt/intelFPGA/17.0/quartus/bin/nios2-terminal | |||
nios2-terminal: connected to hardware target using JTAG UART on cable | |||
nios2-terminal: "USB-Blaster [2-1.2]", device 1, instance 0 | |||
nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate) | |||
PWB Revision 1 Boot Loader | |||
Ver 2.0 Build 357 - Wed Jun 6 15:05:35 PDT 2018 | |||
... | |||
</pre> | |||
= ZZZ = | = ZZZ = | ||
ZZZ | ZZZ | ||
Revision as of 23:41, 18 September 2019
Links
- https://bitbucket.org/teamalphag/pwb_rev1_firmware
- https://edev-group.triumf.ca/fw/exp/alphag/feam/rev1
- https://ladd00.triumf.ca/daqinv/frontend/list/170 - PWB inventory database
Schematics
Firmware
NIOS terminal
$ ssh agmini@daq16 $ /opt/intelFPGA/16.1/quartus/bin/jtagconfig 1) USB-Blaster [2-1.2] 02B030DD 5CGTFD7(B5|C5|D5)/5CGXBC7B6/.. $ /opt/intelFPGA/17.0/quartus/bin/nios2-terminal nios2-terminal: connected to hardware target using JTAG UART on cable nios2-terminal: "USB-Blaster [2-1.2]", device 1, instance 0 nios2-terminal: (Use the IDE stop button or Ctrl-C to terminate) PWB Revision 1 Boot Loader Ver 2.0 Build 357 - Wed Jun 6 15:05:35 PDT 2018 ...
ZZZ
ZZZ