Components

Back to Alpha-g

AWB - ANODE WIRE BOARD

• Description

16 channels bi-polar pre-amp used for the Anode wire, mounted on the 2 end plates of the rTPC

• Reference

Schematic_TDE1667.pdf
TDE1668 (Assembly TED1667)

• Requirement

Prototype: 16 boards
Full rTPC: 2 x 16 boards (on both endplates)

• Power

+5V@300mA, -5V@300mA per board
1.60 Connector: IPL1-105-01-F-S-RA-K (Terminal) / IPD1-05-S-K (Socket)

• Signals

8.78 Connector input: SSQ-117-02-G-D (Socket) / TSS-117-01-S-D (TDE 1858) x1
4.40 Connector output: ERF8-010-05.0-L-DV-L-K-TR / ERCD (cable assembly) x1

• Production per board

 45.- PCB based on 20 boards
 80.- Assembly based on[EDIT] 15 boards
128.- parts based on 44 boards

AWC - ANODE WIRE CARD

• Description

Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC.
Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp

• Reference

Media:Schmeatic_TDE1858.pdf
https://edev.triumf.ca/svn/edevel00423

• Power

HV input through single cable 
HV daisy-chained to the neighbor card through 2 pins header x2

• Requirement

Prototype: 2 x 16
Full rTPC: 2 x 16 (both end plates)

• Signals

1.44 Mill-Max 8360 (long socket) x16
3.86 YSS-117-01-S-D x1

• other components

1.00 HV cap  SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16
0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32
0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32

• Production per card

 11.- PCB based on 50 cards
100.- Assembly based on 36 cards
 50.- Estimated part cost

AWTC - Anode Wire Transition Card

Cancelled Will be integrated into the new FMC-32 card.

• Description

WFD front transition card for blue cable to the 62.5 Msps WFDs 2 x 16 Anode Wires, 2 MCX Test Signal Inputs

• Reference

Media:Schematic_TDE1894.pdf
TDE1893 (Assembly TDE1894)
edev link

• Requirement

Prototype: 3
Full rTPC: 16 cards for Alpha-16

• Signals

4.40 Connector input: ERF8-010-0.05-S-DV-K-TR x2 based on 40
6.24 Connector output: FX2-40P-1.27DSL(71) x1
9.55 Test signal input: J01271A0151 x2

• Production per card

12.25 PCB based on 30 cards
50.- Assembly
30.- Estimated parts cost

RTM - Barrel Scintillator and Anode wire Transition card

• Description

WFD rear transition card for blue cable to the 100Msps WFDs Double purpose 1) used for Barrel Scint (2x8 channels) 2) Anode Wires (1x16)

• Reference

TDE1895 (Assembly TDE1896)
https://edev.triumf.ca/svn/edevel00423

• Requirement

Prototype: 4
Full rTPC: 16 for the barrel scint

* Power
Contains input protection relays (powered by the VME backplane)

• Signals

 4.40 Connector input: ERF8-010-0.05-S-DV-K-TR x3 based on 40
52.00 Connector output: Harting DIN 41612 F 160 POS 2.54mm x1

• Production per board

 27.- PCB based on 30 cards
300.- Assembly based on 5 cards
 12.- Front panel based on 30 cards
  4.   Handles based on 30 pairs
100.- Estimate part total cost

HVRC - High Voltage Resistor card

• Description

• Reference

High Voltage resistor chain for the  endplate rings

• Requirement

Prototype: 2
Full rTPC: 2 one per endplate

• Production per board

  9.4  PCB based on 10 card
100.0 Assembly based on 2 cards
 24.0 Part cost

CDM - Clock Distribution Board

• Description

Receive the external reference clock for distribution to the 16 Alpha-16, 8 FEAM, ALPHA-T, TDC, BOBs Does distribute the Trigger from the Alpha-T to the 16 Alpha-16, 8 FEAM, TDC.

• Reference

• Requirement

Prototype: 1 
Full rTPC: 1

• Power

VME power

• Signals

• Production per board

1500.- Module
 120.- front panel based on 6 fp
  10.- VME handle based on 7

FMCLink- FMC Gbit link board

• Description

2xQSFP slots. Each QSFP slot supports 4x GigE (or with QSFP+, 4x 10GigE links) Has 1 eSata for Clock communication to ALPHA-T

FMC link

• Reference

• Requirement

Prototype: 1
Full rTPC: 10 (2 Trigger board, 8 Padwing board)

• Power

Alpha-16

• Signals

• Production per board

200.-

ALPHA-16 WFD Board

• Description

16 channels WFD 12bits@105Msps possible additional 32 channels WFD 12bits@62.5

• Reference

• Requirement

Prototype: 11 (available)
Full rTPC: 16

• Power

VME board

• Signals

• Production per board

3000.- board
 135.- front panel  based on 5fp
  30.- VME ejector based on 10

FMC32 - FMC 32x62.5Msps board

• Description

32 channels WFD 62.5Msps FMC format for the Alpha-16 Has 1 Sata for Trigger communication to Alpha-T

FMC62

• Reference

• Requirement

Prototype: 3
Full rTPC: 8

• Power

from Alpha-16

• Signals

Bi-polar input 2Vpk2pk

• Production per board

 980.- mezzanine

FEAM - Padwing Board

• Description

Cathode pad readout board for 288 channels, uses the AFTER chip ASIC. A board composed of 2 wings (2 AFTER per wing) and central acquisition section with optical link output. Power provided by contact on the back of the padwing card through 3 copper bars.

• Reference

TDE1653 

• Requirement

Prototype: 8
Full rTPC: 64

• Power

+5.2V @ 1700mA
+2.6V @ 750mA

• Signals

 11.- Connector to cathode board TFM-125-L2-S-D-K x4
150.- AFTER chip (Euro 120) based on 360 x4

• Production per board

 440.- PCB based on 10  (190.- based on 70)
 200.- Assembly based on Estimation
1000.- Estimated part cost

ALPHA-T - Trigger Board

• Description

Takes 16 LVDS links from the 16 Alpha-16 for Trigger decision. The trigger output is fed to the CDM for distribution to the 16 Alpha-16, 8 FEAM, TDC, and other. [[File:|400px|none|]]

• Reference
• Requirement

Prototype: 1
Full rTPC: 1

• Power

VME

• Signals

• Production per board

PDB - Power Distribution and monitoring board

• Description

16 channels 2 voltage distribution board for AWB and BSB. Measures 32 individual DC current and input voltage for 16 power cable to the AWB or BSB. Uses a RaspberryPi card for the network interface. Input voltage range determined by a selection of divider resistors. Onboard temperature sensor and access to 3 spare ADC channels for a remote temperature of voltage sensing (+-1.65V).

• Reference

edev link
Media:Schematic.pdf
TDE1947 	K. Ong 	ALPHAg (Pxxx); Power Distribution & Monitor Bd Assembly
TDE1946 	K. Ong 	ALPHAg (Pxxx); Power Distribution & Monitor Bd

• Requirement

Prototype: 2
Full rTPC: 4

• Power

TP-Link UH720 USB Hub for onboard Raspberry Pi, PL512 for main power

• Signals

16 dual input voltage.  Access to 4 spare ADC input channels (Up to +-1.65V) for remote voltage/temperature sensing.
Power Output x16: IPL1-105-01-F-S-K
Power Input x1:   MPT-06-01-01-L-RA-SD
Raspberry Pi: Ethernet

• Production per board

 $47.00 - PCB Manufacturing (based on order of 8)
 $49.00 - Raspberry Pi
 $65.00 - ICs, Passives and misc Electronics.
$105.00- Connectors and Cables.

CPWC - Cathode Pad Wall card

• Description

Half cylindrical FR4 curved PCB board making the Cathode pad rTPC outer wall Composed of 1152 pads connected to 16 AFTER chip (72).

• Reference

TDE1663 (Assembly TDE1664) 

• Requirement

Prototype: 2
Full rTPC: 16

• Signals

 12.- Connector on cathode board SFM-125-22-S-D-K (mating with TFM-125-L2-S-D-K on PADWing) x32

• Production per board

630.- PCB based on 6 cards
800.- Resistors assembly based on 2 card
700.- Stencils based on 2 
384.- Connector based on 70

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board

DUMMY

• Description

[[File:|400px|none|]]

• Reference
• Requirement

Prototype:
Full rTPC:

• Power
• Signals
• Production per board