VME-GRIF-ADC16-Rev1: Difference between revisions
Jump to navigation
Jump to search
Line 53: | Line 53: | ||
= Onboard thermometers = | = Onboard thermometers = | ||
* Temperature readout chip: LTC2983CLX#PBF | |||
* Thermometers: 9x RTD1..RTD9 type PT100. | |||
= Onboard hardware = | = Onboard hardware = |
Revision as of 13:42, 26 April 2018
VME-GRIF-ADC16-Rev1
Links
- https://edev.triumf.ca/project/edev/vme/edevel00212 - project page on redmine
- https://edev.triumf.ca/projects/edevel00212/repository/entry/branch/rev1/ALTIUM/GRIF-ADC16%20Rev1.pdf - rev1 schematics on redmine
- https://edev-group.triumf.ca/hw/vme/grif16/rev1 - project page on gitlab
- https://edev-group.triumf.ca/hw/vme/grif16/rev1/blob/master/Altium/GRIF-ADC16%20Rev1.pdf - rev1 schematics on gitlab
- https://edev-group.triumf.ca/fw/exp/alphag/alpha16/rev1 - firmware on gitlab
- https://bitbucket.org/teamalphag/adc_firmware/overview - firmware on bitbucket
- https://bitbucket.org/teamalphag/adc_maxv_firmware - MaxV firmware on bitbucket
- https://edev-group.triumf.ca/hw/fmc/adc32/rev0 - FMC-ADC32-Rev0 on gitlab
- https://edev-group.triumf.ca/hw/fmc/adc32/rev1 - FMC-ADC32-Rev1 on gitlab
Front panel connectors
From top to bottom:
- SFP connector - 1GigE fiber/copper/DAC
- 4 LEDs
- eSATA - clock+trigger input
- FMC daughter card slot
- 2 LEMO
- 16 MCX analog inputs
Onboard switches and connectors
- FP_SW1
- FP_SW2
- JTAG FPGA
- JTAG MAXV
- 2x VME address rotary switches
- "reset" button
- SD card slot
- "Display" connector
- 16x 3 position switches for gain and input (front/back) selection
Onboard LEDs
| | |0|1|2|3| | |
- FP_LED0
- FP_LED1
- FP_LED2
- FP_LED3
Onboard thermometers
- Temperature readout chip: LTC2983CLX#PBF
- Thermometers: 9x RTD1..RTD9 type PT100.
Onboard hardware
- 2-output DAC: Maxim MAX5877EGK+D, output driver TI OPA 2690IDG4, range +/- 5V
- I2C MAC chip: Microchip tech 24AA02E48T-I/OT, I2C addr 0xA0, MAC_SCL, MAC_SDA
- FPGA Boot flash: Micron Serial NOR flash memory: N25Q00AA13GSF40G
Board schematics
Firmware
AAA
FMC modules
FMC-ADC32-Rev0
- project page: https://edev-group.triumf.ca/hw/fmc/adc32/rev0
- schematics: File:FMC_32_Channel_ADC_Rev0.pdf
FMC-ADC32-Rev1
- project page: https://edev-group.triumf.ca/hw/fmc/adc32/rev1
- schematics: File:FMC_ADC32_Rev1.pdf
FMC-DualMiniSas-Rev1
- project page: https://edev.triumf.ca/project/edev/fmc-modules/edevel00109
- schematics: File:FMC_-_MiniSAS_x_2_Rev1.pdf
FMC-SfpMiniSasEsata-Rev2
(note: not used on the GRIF16, this information is to be moved to the ALPHA-T page)
- project page: https://edev.triumf.ca/project/edev/fmc-modules/edevel00162
- schematics: File:FMC_-_SFP_and_Mini-SAS_Interface_-_Rev2.PDF
ZZZ
ZZZ