VME-NIMIO32-Rev3: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
|||
| Line 6: | Line 6: | ||
= General information = | = General information = | ||
== Hardware == | |||
* FPGA: Cyclone5 5CGXFC7D7F27C8N | |||
* boot flash: EPCQ256 | |||
* clock cleaner: IDT 8T49N241-009NLG1, I2C addr 1111'100b | |||
* mac address: Microchip 24AA02E48T-I/OT, I2C address 0xA0, bus MAC_SCL, MAC_SDA | |||
* eeprom: Microchip 24AA04T-I/OT, I2C address 0xA0, bus SCLK, SDATA | |||
* clocks: OSC1, OSC2: 125 MHz, OSC3: 10 MHz | |||
* SATA connectors: 2 on front panel | |||
* SFP on front panel | |||
= Firmware = | = Firmware = | ||
Revision as of 14:01, 23 March 2021
VME-NIMIO32-Rev3
Links
General information
Hardware
- FPGA: Cyclone5 5CGXFC7D7F27C8N
- boot flash: EPCQ256
- clock cleaner: IDT 8T49N241-009NLG1, I2C addr 1111'100b
- mac address: Microchip 24AA02E48T-I/OT, I2C address 0xA0, bus MAC_SCL, MAC_SDA
- eeprom: Microchip 24AA04T-I/OT, I2C address 0xA0, bus SCLK, SDATA
- clocks: OSC1, OSC2: 125 MHz, OSC3: 10 MHz
- SATA connectors: 2 on front panel
- SFP on front panel
Firmware
use /daq/quartus/13.1.3.178/quartus/bin/quartus
daq01:intelFPGA$ /daq/quartus/13.1.3.178/quartus/bin/jtagconfig 1) USB-Blaster [1-8] 02B030DD 5CGTFD7(B5|C5|D5)/5CGXBC7B6/..