Components: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (27 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
Back to [[Alpha-g]] | |||
=='''AWB - ANODE WIRE BOARD'''== | =='''AWB - ANODE WIRE BOARD'''== | ||
* Description | * Description | ||
| Line 7: | Line 9: | ||
Schematic_TDE1667.pdf | Schematic_TDE1667.pdf | ||
TDE1668 (Assembly TED1667) | TDE1668 (Assembly TED1667) | ||
* Requirement | * Requirement | ||
Prototype: 16 boards | Prototype: 16 boards | ||
| Line 58: | Line 60: | ||
=='''AWTC - Anode Wire Transition Card'''== | =='''AWTC - Anode Wire Transition Card'''== | ||
'''Cancelled''' Will be integrated into the new FMC-32 card. | |||
* Description | * Description | ||
WFD front transition card for blue cable to the 62.5 Msps WFDs | WFD front transition card for blue cable to the 62.5 Msps WFDs | ||
2 x 16 Anode Wires, 2 MCX Test Signal Inputs | 2 x 16 Anode Wires, 2 MCX Test Signal Inputs | ||
[[File:awtc|400px|none|Anode Wire Transition card]] | [[File:awtc.jpeg|400px|none|Anode Wire Transition card]] | ||
* Reference | * Reference | ||
Media:Schematic_TDE1894.pdf | Media:Schematic_TDE1894.pdf | ||
| Line 70: | Line 75: | ||
* Requirement | * Requirement | ||
Prototype: 3 | Prototype: 3 | ||
Full rTPC: 16 cards for | Full rTPC: 16 cards for Alpha-16 | ||
* Signals | * Signals | ||
| Line 88: | Line 91: | ||
WFD rear transition card for blue cable to the 100Msps WFDs | WFD rear transition card for blue cable to the 100Msps WFDs | ||
Double purpose 1) used for Barrel Scint (2x8 channels) 2) Anode Wires (1x16) | Double purpose 1) used for Barrel Scint (2x8 channels) 2) Anode Wires (1x16) | ||
[[File:|400px|none|Barrel Scintillator and Anode wire Transition card]] | [[File:Rtm.jpeg|400px|none|Barrel Scintillator and Anode wire Transition card]] | ||
* Reference | * Reference | ||
| Line 115: | Line 118: | ||
* Description | * Description | ||
[[File:|400px|none|]] | [[File:hvrc.jpeg|400px|none|]] | ||
* Reference | * Reference | ||
High Voltage resistor chain for the endplate rings | High Voltage resistor chain for the endplate rings | ||
| Line 128: | Line 131: | ||
24.0 Part cost | 24.0 Part cost | ||
=='''Clock Distribution Board'''== | =='''CDM - Clock Distribution Board'''== | ||
* Description | * Description | ||
Receive the external reference clock for distribution to the 16 Alpha-16, 8 FEAM, ALPHA-T, TDC, BOBs | |||
[[File:|400px|none|Clock Distribution Board]] | Does distribute the Trigger from the Alpha-T to the 16 Alpha-16, 8 FEAM, TDC. | ||
[[File:Cbd.jpeg|400px|none|Clock Distribution Board]] | |||
* Reference | * Reference | ||
| Line 151: | Line 155: | ||
* Description | * Description | ||
2xQSFP slots. Each QSFP slot supports 4x GigE (or with QSFP+, 4x 10GigE links) | 2xQSFP slots. Each QSFP slot supports 4x GigE (or with QSFP+, 4x 10GigE links) | ||
Has 1 eSata for Clock communication to | Has 1 eSata for Clock communication to ALPHA-T | ||
[[File:|400px|none|FMC link]] | [[File:Fmc.jpeg|400px|none|FMC link]] | ||
* Reference | * Reference | ||
| Line 161: | Line 165: | ||
* Power | * Power | ||
Alpha-16 | |||
* Signals | * Signals | ||
| Line 168: | Line 172: | ||
200.- | 200.- | ||
==''' | =='''ALPHA-16 WFD Board'''== | ||
* Description | * Description | ||
16 channels WFD 12bits@105Msps | 16 channels WFD 12bits@105Msps | ||
possible additional 32 channels WFD 12bits@62.5 | possible additional 32 channels WFD 12bits@62.5 | ||
[[File:|400px|none|Grif-16]] | [[File:Grif-16.jpeg|400px|none|Grif-16]] | ||
* Reference | * Reference | ||
* Requirement | * Requirement | ||
Prototype: | Prototype: 11 (available) | ||
Full rTPC: 16 | Full rTPC: 16 | ||
| Line 191: | Line 195: | ||
30.- VME ejector based on 10 | 30.- VME ejector based on 10 | ||
==''' | =='''FMC32 - FMC 32x62.5Msps board'''== | ||
* Description | * Description | ||
32 channels WFD 62.5Msps FMC format for the | 32 channels WFD 62.5Msps FMC format for the Alpha-16 | ||
Has 1 Sata for Trigger communication to | Has 1 Sata for Trigger communication to Alpha-T | ||
[[File:|400px|none|FMC62]] | [[File:Fmc.jpeg|400px|none|FMC62]] | ||
* Reference | * Reference | ||
* Requirement | * Requirement | ||
Prototype: | Prototype: 3 | ||
Full rTPC: | Full rTPC: 8 | ||
* Power | * Power | ||
from | from Alpha-16 | ||
* Signals | * Signals | ||
Bi-polar input | Bi-polar input 2Vpk2pk | ||
* Production per board | * Production per board | ||
980.- mezzanine | 980.- mezzanine | ||
=='''FEAM - Padwing Board'''== | |||
* Description | |||
Cathode pad readout board for 288 channels, uses the AFTER chip ASIC. | |||
A board composed of 2 wings (2 AFTER per wing) and central acquisition section with optical link output. | |||
Power provided by contact on the back of the padwing card through 3 copper bars. | |||
[[File:PWB.jpg|400px|none|Padwing board]] | |||
* Reference | |||
TDE1653 | |||
* Requirement | |||
Prototype: 8 | |||
Full rTPC: 64 | |||
* Power | |||
+5.2V @ 1700mA | |||
+2.6V @ 750mA | |||
* Signals | |||
11.- Connector to cathode board TFM-125-L2-S-D-K x4 | |||
150.- AFTER chip (Euro 120) based on 360 x4 | |||
* Production per board | |||
440.- PCB based on 10 (190.- based on 70) | |||
200.- Assembly based on Estimation | |||
1000.- Estimated part cost | |||
=='''ALPHA-T - Trigger Board'''== | |||
* Description | |||
Takes 16 LVDS links from the 16 Alpha-16 for Trigger decision. The trigger output is fed to the CDM for distribution to | |||
the 16 Alpha-16, 8 FEAM, TDC, and other. | |||
[[File:|400px|none|]] | |||
* Reference | |||
* Requirement | |||
Prototype: 1 | |||
Full rTPC: 1 | |||
* Power | |||
VME | |||
* Signals | |||
* Production per board | |||
=='''PDB - Power Distribution and monitoring board'''== | =='''PDB - Power Distribution and monitoring board'''== | ||
| Line 216: | Line 262: | ||
16 channels 2 voltage distribution board for AWB and BSB. | 16 channels 2 voltage distribution board for AWB and BSB. | ||
Measures 32 individual DC current and input voltage for 16 power cable to the AWB or BSB. | Measures 32 individual DC current and input voltage for 16 power cable to the AWB or BSB. | ||
Uses a RaspberryPi card for network interface. | Uses a RaspberryPi card for the network interface. Input voltage range determined by a selection of divider resistors. | ||
Input voltage range determined by selection of divider resistors. | Onboard temperature sensor and access to 3 spare ADC channels for a remote temperature of voltage sensing (+-1.65V). | ||
[[File:Pdb.jpeg|400px|none|Power Distribution board]] | |||
[[File:|400px|none|Power Distribution board]] | |||
* Reference | * Reference | ||
| Line 232: | Line 277: | ||
* Power | * Power | ||
TP-Link UH720 USB Hub for | TP-Link UH720 USB Hub for onboard Raspberry Pi, PL512 for main power | ||
* Signals | * Signals | ||
| Line 249: | Line 294: | ||
* Description | * Description | ||
Half cylindrical FR4 curved PCB board making the Cathode pad rTPC outer wall | Half cylindrical FR4 curved PCB board making the Cathode pad rTPC outer wall | ||
Composed of 1152 pads connected to 16 AFTER chip (72) | Composed of 1152 pads connected to 16 AFTER chip (72). | ||
[[File:|400px|none|Cathode pad card]] | [[File:Cpb.jpeg|400px|none|Cathode pad card]] | ||
* Reference | * Reference | ||
| Line 268: | Line 313: | ||
384.- Connector based on 70 | 384.- Connector based on 70 | ||
'''DUMMY''' | '''DUMMY''' | ||
* Description | * Description | ||
Latest revision as of 21:00, 24 September 2017
Back to Alpha-g
AWB - ANODE WIRE BOARD
- Description
16 channels bi-polar pre-amp used for the Anode wire, mounted on the 2 end plates of the rTPC
- Reference
Schematic_TDE1667.pdf TDE1668 (Assembly TED1667)
- Requirement
Prototype: 16 boards Full rTPC: 2 x 16 boards (on both endplates)
- Power
+5V@300mA, -5V@300mA per board 1.60 Connector: IPL1-105-01-F-S-RA-K (Terminal) / IPD1-05-S-K (Socket)
- Signals
8.78 Connector input: SSQ-117-02-G-D (Socket) / TSS-117-01-S-D (TDE 1858) x1 4.40 Connector output: ERF8-010-05.0-L-DV-L-K-TR / ERCD (cable assembly) x1
- Production per board
45.- PCB based on 20 boards 80.- Assembly based on[EDIT] 15 boards 128.- parts based on 44 boards
AWC - ANODE WIRE CARD
- Description
Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC. Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp
- Reference
Media:Schmeatic_TDE1858.pdf https://edev.triumf.ca/svn/edevel00423
- Power
HV input through single cable HV daisy-chained to the neighbor card through 2 pins header x2
- Requirement
Prototype: 2 x 16 Full rTPC: 2 x 16 (both end plates)
- Signals
1.44 Mill-Max 8360 (long socket) x16 3.86 YSS-117-01-S-D x1
- other components
1.00 HV cap SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16 0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32 0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32
- Production per card
11.- PCB based on 50 cards 100.- Assembly based on 36 cards 50.- Estimated part cost
AWTC - Anode Wire Transition Card
Cancelled Will be integrated into the new FMC-32 card.
- Description
WFD front transition card for blue cable to the 62.5 Msps WFDs 2 x 16 Anode Wires, 2 MCX Test Signal Inputs
- Reference
Media:Schematic_TDE1894.pdf TDE1893 (Assembly TDE1894) edev link
- Requirement
Prototype: 3 Full rTPC: 16 cards for Alpha-16
- Signals
4.40 Connector input: ERF8-010-0.05-S-DV-K-TR x2 based on 40 6.24 Connector output: FX2-40P-1.27DSL(71) x1 9.55 Test signal input: J01271A0151 x2
- Production per card
12.25 PCB based on 30 cards 50.- Assembly 30.- Estimated parts cost
RTM - Barrel Scintillator and Anode wire Transition card
- Description
WFD rear transition card for blue cable to the 100Msps WFDs Double purpose 1) used for Barrel Scint (2x8 channels) 2) Anode Wires (1x16)
- Reference
TDE1895 (Assembly TDE1896) https://edev.triumf.ca/svn/edevel00423
- Requirement
Prototype: 4 Full rTPC: 16 for the barrel scint
* Power Contains input protection relays (powered by the VME backplane)
- Signals
4.40 Connector input: ERF8-010-0.05-S-DV-K-TR x3 based on 40 52.00 Connector output: Harting DIN 41612 F 160 POS 2.54mm x1
- Production per board
27.- PCB based on 30 cards 300.- Assembly based on 5 cards 12.- Front panel based on 30 cards 4. Handles based on 30 pairs 100.- Estimate part total cost
HVRC - High Voltage Resistor card
- Description
- Reference
High Voltage resistor chain for the endplate rings
- Requirement
Prototype: 2 Full rTPC: 2 one per endplate
- Production per board
9.4 PCB based on 10 card 100.0 Assembly based on 2 cards 24.0 Part cost
CDM - Clock Distribution Board
- Description
Receive the external reference clock for distribution to the 16 Alpha-16, 8 FEAM, ALPHA-T, TDC, BOBs Does distribute the Trigger from the Alpha-T to the 16 Alpha-16, 8 FEAM, TDC.
- Reference
- Requirement
Prototype: 1 Full rTPC: 1
- Power
VME power
- Signals
- Production per board
1500.- Module 120.- front panel based on 6 fp 10.- VME handle based on 7
FMCLink- FMC Gbit link board
- Description
2xQSFP slots. Each QSFP slot supports 4x GigE (or with QSFP+, 4x 10GigE links) Has 1 eSata for Clock communication to ALPHA-T
- Reference
- Requirement
Prototype: 1 Full rTPC: 10 (2 Trigger board, 8 Padwing board)
- Power
Alpha-16
- Signals
- Production per board
200.-
ALPHA-16 WFD Board
- Description
16 channels WFD 12bits@105Msps possible additional 32 channels WFD 12bits@62.5
- Reference
- Requirement
Prototype: 11 (available) Full rTPC: 16
- Power
VME board
- Signals
- Production per board
3000.- board 135.- front panel based on 5fp 30.- VME ejector based on 10
FMC32 - FMC 32x62.5Msps board
- Description
32 channels WFD 62.5Msps FMC format for the Alpha-16 Has 1 Sata for Trigger communication to Alpha-T
- Reference
- Requirement
Prototype: 3 Full rTPC: 8
- Power
from Alpha-16
- Signals
Bi-polar input 2Vpk2pk
- Production per board
980.- mezzanine
FEAM - Padwing Board
- Description
Cathode pad readout board for 288 channels, uses the AFTER chip ASIC. A board composed of 2 wings (2 AFTER per wing) and central acquisition section with optical link output. Power provided by contact on the back of the padwing card through 3 copper bars.
- Reference
TDE1653
- Requirement
Prototype: 8 Full rTPC: 64
- Power
+5.2V @ 1700mA +2.6V @ 750mA
- Signals
11.- Connector to cathode board TFM-125-L2-S-D-K x4 150.- AFTER chip (Euro 120) based on 360 x4
- Production per board
440.- PCB based on 10 (190.- based on 70) 200.- Assembly based on Estimation 1000.- Estimated part cost
ALPHA-T - Trigger Board
- Description
Takes 16 LVDS links from the 16 Alpha-16 for Trigger decision. The trigger output is fed to the CDM for distribution to the 16 Alpha-16, 8 FEAM, TDC, and other. [[File:|400px|none|]]
- Reference
- Requirement
Prototype: 1 Full rTPC: 1
- Power
VME
- Signals
- Production per board
PDB - Power Distribution and monitoring board
- Description
16 channels 2 voltage distribution board for AWB and BSB. Measures 32 individual DC current and input voltage for 16 power cable to the AWB or BSB. Uses a RaspberryPi card for the network interface. Input voltage range determined by a selection of divider resistors. Onboard temperature sensor and access to 3 spare ADC channels for a remote temperature of voltage sensing (+-1.65V).
- Reference
edev link Media:Schematic.pdf TDE1947 K. Ong ALPHAg (Pxxx); Power Distribution & Monitor Bd Assembly TDE1946 K. Ong ALPHAg (Pxxx); Power Distribution & Monitor Bd
- Requirement
Prototype: 2 Full rTPC: 4
- Power
TP-Link UH720 USB Hub for onboard Raspberry Pi, PL512 for main power
- Signals
16 dual input voltage. Access to 4 spare ADC input channels (Up to +-1.65V) for remote voltage/temperature sensing. Power Output x16: IPL1-105-01-F-S-K Power Input x1: MPT-06-01-01-L-RA-SD Raspberry Pi: Ethernet
- Production per board
$47.00 - PCB Manufacturing (based on order of 8) $49.00 - Raspberry Pi $65.00 - ICs, Passives and misc Electronics. $105.00- Connectors and Cables.
CPWC - Cathode Pad Wall card
- Description
Half cylindrical FR4 curved PCB board making the Cathode pad rTPC outer wall Composed of 1152 pads connected to 16 AFTER chip (72).
- Reference
TDE1663 (Assembly TDE1664)
- Requirement
Prototype: 2 Full rTPC: 16
- Signals
12.- Connector on cathode board SFM-125-22-S-D-K (mating with TFM-125-L2-S-D-K on PADWing) x32
- Production per board
630.- PCB based on 6 cards 800.- Resistors assembly based on 2 card 700.- Stencils based on 2 384.- Connector based on 70
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board
DUMMY
- Description
[[File:|400px|none|]]
- Reference
- Requirement
Prototype: Full rTPC:
- Power
- Signals
- Production per board