DS-DM

DS-DM

DarkSide-20k Global and Crate Data Manager board (GDM and CDM).

Global Data Manager (GDM):

• clock distribution to CDM boards (including GPS/atomic clock source)
• collection of trigger data from CDM boards, processing and distribution of trigger decision to CDM boards
• run control

Crate Data Manager (CDM):

• clock distribution from GDM to CAEN digitizers
• receive trigger data from CAEN digitizers
• send trigger data to GDM
• run control and dead time control

Links

edev links:

• https://edev-group.triumf.ca/fw/exp/darkside/gcdm
• https://edev-group.triumf.ca/hw/vme/dark-side-20k-data-manager-card/rev0
• https://edev-group.triumf.ca/hw/vme/dark-side-20k-data-manager-card/rev0/-/blob/master/Altium/Project%20Outputs%20for%20DS-DM-Rev0/SCH-DS-xDM-Rev0.PDF
• https://edev-group.triumf.ca/hw/vme/dark-side-20k-data-manager-card/rev0/-/blob/master/Testing/Clk3_XO_125_to_fpgaIN_recoveredMGTclk_to_IN2_Si5394-RevA-Project.slabtimeproj

Xilinx links:

• Platform Cable USB II: https://docs.xilinx.com/v/u/en-US/ds593

Enclustra links:

• https://www.enclustra.com/en/products/system-on-chip-modules/mercury-xu8/

Onboard hardware

• jtag chain: arm_dap_0 0x5BA00477, xczu4_1 0x04721093
• Mercury+ XU8 module: ME-XU8-4CG-1E-D11E-R2.1
  • Xilinx® Zynq Ultrascale+™ MPSoC XCZU4CG-1FBVB900E
  • DDR4 ECC SDRAM (PS) 2 GB
  • DDR4 SDRAM (PL) 1GB

Board schematics

• File:SCH-DS-xDM-Rev0.PDF

Install Xilinx tools

• install Vivado 2020.2

login at https://www.xilinx.com/myprofile.html
go to "Downloads"
go to archive,
find 2020.2
download Xilinx_Unified_2020.2_1118_1232_Lin64.bin
sh ./Xilinx_Unified_2020.2_1118_1232_Lin64.bin
banner window should open with spinner "downloading installation data"
"a newer version is available" -> say "continue"
next
"select install type" window:
provide email and password,
select "download image"
select directory /home/olchansk/Xilinx/Downloads/2020.2\
select "linux" and "full image"
next
download summary: space required 38.52 Gbytes
download
installation progress
downloading spinner, 16 M/s 47 minutes...
"download image has been created successfully". Ok.
check contents of /home/olchansk/Xilinx/Downloads/2020.2
ls -l /home/olchansk/Xilinx/Downloads/2020.2
total 67
drwxr-xr-x 2 olchansk users    9 Sep  1 16:22 bin
drwxr-xr-x 3 olchansk users   15 Sep  1 16:23 data
drwxr-xr-x 4 olchansk users    4 Sep  1 16:22 lib
drwxr-xr-x 2 olchansk users  644 Sep  1 16:22 payload
drwxr-xr-x 2 olchansk users    7 Sep  1 16:22 scripts
drwxr-xr-x 4 olchansk users    4 Sep  1 16:22 tps
-rwxr-xr-x 1 olchansk users 3256 Nov 18  2020 xsetup
daq13:2020.2$ 
./xsetup
spinned loading installation data
xilinx design tools 2022.1 now available -> say continue
"welcome" -> next
"select product" -> vivado -> next -> vivado hl system edition -> next
select devices: only zynq ultrascale+ mpsoc -> next
select destination: /opt/Xilinx (as root, mkdir /opt/Xilinx, chmod olchansk.users /opt/Xilinx)
install ...
complete
move /home/olchansk/Xilinx/Downloads/2020.2 to /daq/daqstore/olchansk/Xilinx/Downloads/

• install petalinux 2020.2

./xsetup
"a newer version is available" -> say "continue"
next
"select product to install" -> select Petalinux (Linux only) -> next
"select destination directory" -> select "/opt/Xilinx" (disk space required 2.64 GB) -> next
"summary" -> install ...
error about missing /tmp/tmp-something files
"installation completed successfully" (hard to dismiss, "ok" button is partially cut-off)
done?
I think it failed, /opt/Xilinx/PetaLinux/2020.2/bin is emptyu except for petalinux-v2020.2-final-installer.run
try to run it by hand, same error about /tmp/tmp-something files. strange...

JTAG server

localhost:3121

Build firmware

• git clone git@edev-group.triumf.ca:fw/exp/darkside/gcdm.git
• #Makefile change VIVADO_SETTINGS_SCRIPT := /opt/Xilinx/Vivado/2022.1/settings64.sh
• #. /opt/Xilinx/Vivado/2022.1/settings64.sh
• . /opt/Xilinx/Vivado/2020.2/settings64.sh
• make clean
• make all_from_scratch

ZZZ

ZZZ