Components

DUMMY

• Description
• Reference
• Requirement
• Prototype [[File:|400px|left|alt text]]
• Full rTPC
• Power
• Signals
• Production per
• TDE1750 K. Ong ALPHAg (P344); Temperature Monitor Bd Assembly TDE1749 K. Ong ALPHAg (P344); Temperature Monitor Bd

AWB - ANODE WIRE BOARD

• Description

16 channels bi-polar pre-amp used for the Anode wire, mounted on the 2 end plates of the rTPC

• Reference

Schematic_TDE1667.pdf
TDE1668 (Assembly TED1667)

• Requirement

Prototype: 16 boards
Full rTPC: 2 x 16 boards (on both endplates)

• Power

+5V@300mA, -5V@300mA per board
1.60 Connector: IPL1-105-01-F-S-RA-K (Terminal) / IPD1-05-S-K (Socket)

• Signals

8.78 Connector input: SSQ-117-02-G-D (Socket) / TSS-117-01-S-D (TDE 1858) x1
4.40 Connector output: ERF8-010-05.0-L-DV-L-K-TR / ERCD (cable assembly) x1

• Production per board

 45.- PCB based on 20 boards
 80.- Assembly based on[EDIT] 15 boards
128.- parts based on 44 boards

AWC - ANODE WIRE CARD

• Description

Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC.
Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp

• Reference

Media:Schmeatic_TDE1858.pdf
https://edev.triumf.ca/svn/edevel00423

• Power

HV input through single cable 
HV daisy-chained to the neighbor card through 2 pins header x2

• Requirement

Prototype: 2 x 16
Full rTPC: 2 x 16 (both end plates)

• Signals

1.44 Mill-Max 8360 (long socket) x16
3.86 YSS-117-01-S-D x1

• other components

1.00 HV cap  SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16
0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32
0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32

• Production per card

 11.- PCB based on 50 cards
100.- Assembly based on 36 cards
 50.- Estimated part cost