VME-GRIF-ADC16-Rev1

From DaqWiki
Jump to navigation Jump to search

VME-GRIF-ADC16-Rev1

Links

Front panel connectors

From top to bottom:

  • SFP connector - 1GigE fiber/copper/DAC
  • 4 LEDs
  • eSATA - clock+trigger input
  • FMC daughter card slot
  • 2 LEMO
  • 16 MCX analog inputs

Onboard switches and connectors

  • FP_SW1
  • FP_SW2
  • JTAG FPGA
  • JTAG MAXV
  • 2x VME address rotary switches
  • "reset" button
  • SD card slot
  • "Display" connector
  • 16x 3 position switches for gain and input (front/back) selection

Onboard LEDs

|
|
|0|1|2|3|
|
|
  • FP_LED0
  • FP_LED1
  • FP_LED2
  • FP_LED3

Onboard thermometers

  • Temperature readout chip: LTC2983CLX#PBF
  • Thermometers: 9x RTD1..RTD9 type PT100.

Onboard hardware

  • 2-output DAC: Maxim MAX5877EGK+D, output driver TI OPA 2690IDG4, range +/- 5V
  • I2C MAC chip: Microchip tech 24AA02E48T-I/OT, I2C addr 0xA0, MAC_SCL, MAC_SDA
  • FPGA Boot flash: Micron Serial NOR flash memory: N25Q00AA13GSF40G

Board schematics

File:GRIF-ADC16_Rev1.pdf

Firmware

AAA

FMC modules

FMC-ADC32-Rev0

FMC-ADC32-Rev1

FMC-DualMiniSas-Rev1

FMC-SfpMiniSasEsata-Rev2

(note: not used on the GRIF16, this information is to be moved to the ALPHA-T page)

ZZZ

ZZZ