Components
Jump to navigation
Jump to search
DUMMY
- Description
- Reference
- Requirement
- Prototype [[File:|400px|left|alt text]]
- Full rTPC
- Power
- Signals
- Production per
- TDE1750 K. Ong ALPHAg (P344); Temperature Monitor Bd Assembly TDE1749 K. Ong ALPHAg (P344); Temperature Monitor Bd
AWB - ANODE WIRE BOARD
- Description
16 channels bi-polar pre-amp used for the Anode wire, mounted on the 2 end plates of the rTPC
- Reference
Schematic_TDE1667.pdf TDE1668 (Assembly TED1667)
- Requirement
Prototype: 16 boards Full rTPC: 2 x 16 boards (on both endplates)
- Power
+5V@300mA, -5V@300mA per board 1.60 Connector: IPL1-105-01-F-S-RA-K (Terminal) / IPD1-05-S-K (Socket)
- Signals
8.78 Connector input: SSQ-117-02-G-D (Socket) / TSS-117-01-S-D (TDE 1858) x1 4.40 Connector output: ERF8-010-05.0-L-DV-L-K-TR / ERCD (cable assembly) x1
- Production per board
45.- PCB based on 20 boards 80.- Assembly based on[EDIT] 15 boards 128.- parts based on 44 boards
AWC - ANODE WIRE CARD
- Description
Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC. Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp
- Reference
Media:Schmeatic_TDE1858.pdf https://edev.triumf.ca/svn/edevel00423
- Power
HV input through single cable HV daisy-chained to the neighbor card through 2 pins header x2
- Requirement
Prototype: 2 x 16 Full rTPC: 2 x 16 (both end plates)
- Signals
1.44 Mill-Max 8360 (long socket) x16 3.86 YSS-117-01-S-D x1
- other components
1.00 HV cap SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16 0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32 0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32
- Production per card
11.- PCB based on 50 cards 100.- Assembly based on 36 cards 50.- Estimated part cost