VME-CDM

VME-CDM - GRIFFIN Clock Distribution Module

References

• edev login: no public access, sorry!
• edev-pps login: no public access, sorry!
• ladd00 svn login: username: svn, password: svn

• [1] VME-CDM project page on edev.triumf.ca
• [2] Rev2 board schematics (link to edev)
• [3] VME-CDM project page on edev gitlab

General characteristics

Photos

Rev2 boards

Available hardware

• Altera cyclone 1 FPGA: EP1C6Q240C6N
• Serial flash for FPGA configuration: Altera EPCS16
• External SDRAM memory
• VME interface: VME-D[31..0] bidirectional, VME-A[19..0] input only, DTACK output, no BERR, no RETRY/RESP. VME-A[31..20] input only connected only to address decoder FPGA (Altera MAX-something CPLD). This permits all single-word transfer modes, 32-bit DMA (BLT32) and 2eVME DMA (only drives D-lines, but still faster than BLT32). 64-bit DMA (MBLT64) and 2eSST are impossible.
• 16 NIM outputs
• 16 NIM inputs
• 16 ECL/LVDS inputs compatible with LeCroy 4616 ECL/NIM/ECL converter. (Except: Rev0 boards have an incompatible ECL connector)
• 16 "red" and 16 "green" LEDs
• 1 "VME access" LED
• 1 RJ-45 high speed serial I/O interface