HPDVM

About

TBW

Links

TBW

Hardware

TBW

Setup

• connect DVM:
  • use DB9-male--DB9-female straigh-through serial cable
  • in the HPDVM, set communications to 115200 baud, RTS/CTS flow control, 8bit, no parity
  • setup set2net per ser2net instructions, use this ser2net.conf file:

### HP DVM
3001:raw:600:/dev/ttyS0:115200 -XONXOFF -RTSCTS LOCAL
#3003:raw:600:usb-4-2.3-1.0:115200 -XONXOFF -RTSCTS LOCAL

• • in start_daq.sh, add this before start of mhttpd:

$HOME/packages/ser2net/ser2net -c $HOME/online/ser2net.conf -p 3000