BNMR: Scripts
Links
Introduction
A number of important scripts are used in the bnmr and bnqr experiments. Some of the most important are described here. Unless otherwise noted, the scripts described here can be found in directory ~/online/<beamline>/bin.
Another important group of scripts are the perlscripts found in directory ~/online/<beamline>/perl. These are described under BNMR: Perlscripts.
.cshrc
This important script in $HOME is the script executed on log in. This sets up the path, the aliases and environment variables required for running the DAQ system. This file is shared by all the machines in the NIS cluster with isdaq00 as master. This includes isdaq01, isdaq06, lxbnmr, lxbnqr. This script therefore checks the $HOST environment variable before setting up the DAQ system. See .cshrc for an example.
start-all
start-all is an alias to the script start-all-daq-bn[mq]r (see Nomenclature). This script is run by the experimenter to start all the MIDAS clients needed for the DAQ system. It checks to see if each client is already running, and if not, starts it. It can be run at any time during the run to restart missing clients.
Environment variable EXPERIM_DIR must be defined (in .cshrc). This script calls #check-host-bnmr or check-host-bnqr.
kill-all
kill-all is an alias to the script kill-all. This script kills all DAQ related clients. When there is some problem with the DAQ that cannot be otherwise resolved, users often do a kill-all followed by a start-all to ensure a clean restart.
Recently (June 2016) an extra feature has been added to the script kill-all. This is the execution of the file init_odb.com. This file is an odbedit command file containing a list of ODB keys to initialize to their default state.
show-windows
show-windows is an alias to the script show-windows. This script attaches to and displays (in an xterm, if possible) one or all midas clients that were started and managed under the screen program. This includes clients mdarc,mheader and the frontend (client name febn[mq]r_vmic - see Nomenclature).
- To display all windows, give no argument, or the word "all".
- To display a specific window, give the parameter in Table 1 :
- Table 1 show-windows parameters
| Command | Parameter | Action |
|---|---|---|
| show-windows | to show all windows | |
| show-windows | all | |
| show-windows | vmic | to show frontend window |
| show-windows | frontend | |
| show-windows | mdarc | to show mdarc window |
| show-windows | mheader | to show mheader window |
check-host-bnmr or check-host-bnqr
The appropriate script check-host-bn[mq]r (see Nomenclature) is called by #start-all.
It checks that the following environment variables are defined:
- DAQ_HOST MIDASSYS MIDAS_EXPTAB MIDAS_EXPT_NAME DAQ_HOST MSERVER_PORT BEAMLINE
It further checks that the user is logged onto the correct computer for DAQ (i.e. HOST matches DAQ_HOST) and that MIDAS_EXPT_NAME and BEAMLINE match the username ( bnmr or bnqr).
check-host-vmic
This script checks that the script is being run on the VMIC rather than the MIDAS host machine (i.e. HOST matches VMIC_HOST) It is called by start-frontend.
at_start_run.pl
The script at_start_run.pl is executed at the start of every run by the MIDAS system (see #NOTE below). It checks access to the CAMP slow control system, and checks that the CAMP logged variables (including automatic logged variables) can be accessed, and zeroes the CAMP statistics. Similarly, it also checks the EPICS logged variables (if enabled) exist and can be accessed. If an error occurs, it sets alarms in the ODB to inform the experimenters by means of an alarm banner on the custom status page.
This script is also called as a customscript. See also BNMR: Perlscripts#at_start_run.pl.
at_end_run.csh
The script at_end_run.csh is executed at the end of every run (see #NOTE). This script runs a second script elog_every_run.csh. This script reads the /Experiment/Edit on start parameters (i.e. the parameters entered by the experimenter on starting a run), other ODB parameters including the Experimental (PPG) Mode of the run and whether it is run in dual or single channel mode, reads the statistics of the CAMP logged devices, and sends them all to the appropriate ELOG.
- NOTE
The MIDAS system provides a means whereby users' scripts can be automatically executed at the start or end of the run, by means of keys in the ODB /programs tree. The key Execute on start run contains the name and path of a script to be executed at the start of every run, and the key Execute on stop run contains the name and path of a script to be executed at the end of every run. For example,
[local:bnqr:Stopped]/>ls "/programs/Execute on start run" Execute on start run /home/bnqr/online/bnqr/bin/at_start_run.pl /home/bnqr/online/perl bnqr >/home/bnqr/tmp/at_start_run_pl.log [local:bnqr:Stopped]/>ls "/programs/Execute on stop run" Execute on stop run /home/bnqr/online/bnqr/bin/at_end_run.csh
For more information see MIDAS /Programs ODB tree.