RPI3

Raspberry Pi3

Links

• AAA

On-board hardware

• AAA

Serial console

there is no useful serial console

Benchmarks

[root@armdaq05 ~]# uname -a
Linux armdaq05.triumf.ca 4.4.21-v7+ #911 SMP Thu Sep 15 14:22:38 BST 2016 armv7l armv7l armv7l GNU/Linux
[root@armdaq05 ~]# cat /proc/cpuinfo 
processor	: 0
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 1
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 2
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 3
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

Hardware	: BCM2709
Revision	: a22082
Serial		: 00000000852ec765
[root@armdaq05 ~]# 

[root@armdaq05 ~]# ./memcpy_arm 
memcpy       1 KiBytes:    710 MB/sec
memcpy       2 KiBytes:   1037 MB/sec
memcpy       4 KiBytes:   1340 MB/sec
memcpy       8 KiBytes:   1572 MB/sec
memcpy      16 KiBytes:   1703 MB/sec
memcpy      32 KiBytes:   2010 MB/sec
memcpy      64 KiBytes:   1780 MB/sec
memcpy     128 KiBytes:   1808 MB/sec
memcpy     256 KiBytes:   1421 MB/sec
memcpy     512 KiBytes:    971 MB/sec
memcpy    1024 KiBytes:    862 MB/sec
memcpy    2048 KiBytes:    824 MB/sec
memcpy    4096 KiBytes:    862 MB/sec
memcpy    8192 KiBytes:    817 MB/sec
memcpy   16384 KiBytes:    797 MB/sec
memcpy   32768 KiBytes:    767 MB/sec
memcpy   65536 KiBytes:    765 MB/sec
memcpy  131072 KiBytes:    766 MB/sec
[root@armdaq05 ~]# 

Original boot files with the CentOS 7.1 userland

[root@armdaq05 ~]# blkid
/dev/mmcblk0p1: SEC_TYPE="msdos" LABEL="boot" UUID="70F7-FA1D" TYPE="vfat" 
/dev/mmcblk0p2: LABEL="el7" UUID="0ca625c5-8db1-4f78-a9fd-e6cce04f399e" TYPE="ext4" 
/dev/mmcblk0: PTTYPE="dos" 
[root@armdaq05 ~]# 
[root@armdaq05 ~]# fdisk -l

Disk /dev/mmcblk0: 31.4 GB, 31439454208 bytes, 61405184 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk label type: dos
Disk identifier: 0x5a7089a1

        Device Boot      Start         End      Blocks   Id  System
/dev/mmcblk0p1            8192      137215       64512    c  W95 FAT32 (LBA)
/dev/mmcblk0p2          137216     2713599     1288192   83  Linux
[root@armdaq05 ~]# 
[root@armdaq05 ~]# df -kl
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/root        1235136 1029272    125072  90% /
devtmpfs          469536       0    469536   0% /dev
tmpfs             473868       0    473868   0% /dev/shm
tmpfs             473868   29964    443904   7% /run
tmpfs             473868       0    473868   0% /sys/fs/cgroup
tmpfs              94776       0     94776   0% /run/user/0
/dev/mmcblk0p1     64456   21192     43264  33% /mnt/tmp
[root@armdaq05 ~]# 

Boot files

Original boot files are in /daq/daqshare/olchansk/RPI3/bootfs

• use 32GB micro-SD flash
• create MSDOS partition table
• create first partition 64Mbytes type "C", marked bootable
• run mkfs.msdos
• mount on /mnt/tmp, cd /mnt/tmp
• rsync -av /daq/daqshare/olchansk/RPI3/bootfs/ .
• sync
• cd /; umount /mnt/tmp
• eject
• try to boot from the SD flash - on HDMI video, should see Linux kernel boot all the way to a panic on failure to mount rootfs.

CentOS7 rootfs

• use bootable 32GB micro-SD flash
• create second partion of maximum size
• run mkfs.ext4
• mount on /mnt/tmp, cd /mnt/tmp
• rsync -av /ladd/data0/backup.os/armdaq05/ .
• set label "el7" using e2label
• sync
• cd /; umount /mnt/tmp
• eject
• try to boot, should boot all the way to the login prompt.

Setup Python i2c tools

su - root
yum install python-setuptools.noarch
yum install python-cffi
yum install python-devel
cd git
git clone https://github.com/bivab/smbus-cffi.git
cd smbus-cffi
python setup.py install