Components: Difference between revisions

From DaqWiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 36: Line 36:
   80.- Assembly based on[EDIT] 15 boards
   80.- Assembly based on[EDIT] 15 boards
  128.- parts based on 44 boards
  128.- parts based on 44 boards
'''AWC - ANODE WIRE CARD'''
* Description
Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC.
Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp
[[File:TDE1858.jpg|400px|none|AWC]]
* Reference
Media:Schmeatic_TDE1858.pdf
https://edev.triumf.ca/svn/edevel00423
* Power
HV input through single cable
HV daisy-chained to the neighbor card through 2 pins header x2
* Requirement
Prototype: 2 x 16
Full rTPC: 2 x 16 (both end plates)
* Signals
1.44 Mill-Max 8360 (long socket) x16
3.86 YSS-117-01-S-D x1
* other components
1.00 HV cap  SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16
0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32
0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32
* Production per card
  11.- PCB based on 50 cards
100.- Assembly based on 36 cards
  50.- Estimated part cost

Revision as of 18:23, 14 February 2017

DUMMY

  • Description
  • Reference
  • Requirement
  • Prototype [[File:|400px|left|alt text]]
  • Full rTPC
  • Power
  • Signals
  • Production per
  • TDE1750 K. Ong ALPHAg (P344); Temperature Monitor Bd Assembly TDE1749 K. Ong ALPHAg (P344); Temperature Monitor Bd

AWB - ANODE WIRE BOARD

  • Description

16 channels bi-polar pre-amp used for the Anode wire, mounted on the 2 end plates of the rTPC

AWB
  • Reference
Schematic_TDE1667.pdf
TDE1668 (Assembly TED1667)

  • Requirement
Prototype: 16 boards
Full rTPC: 2 x 16 boards (on both endplates)
  • Power
+5V@300mA, -5V@300mA per board
1.60 Connector: IPL1-105-01-F-S-RA-K (Terminal) / IPD1-05-S-K (Socket)
  • Signals
8.78 Connector input: SSQ-117-02-G-D (Socket) / TSS-117-01-S-D (TDE 1858) x1
4.40 Connector output: ERF8-010-05.0-L-DV-L-K-TR / ERCD (cable assembly) x1
  • Production per board
 45.- PCB based on 20 boards
 80.- Assembly based on[EDIT] 15 boards
128.- parts based on 44 boards

AWC - ANODE WIRE CARD

  • Description
Interface card between the Anode wire crimp pins and the AWB. Mounted on the 2 end plates of the rTPC.
Distribute the HV to 16 anode wires and HV decouple the Anode signal for the pre-amp
AWC
  • Reference
Media:Schmeatic_TDE1858.pdf
https://edev.triumf.ca/svn/edevel00423
  • Power
HV input through single cable 
HV daisy-chained to the neighbor card through 2 pins header x2
  • Requirement
Prototype: 2 x 16
Full rTPC: 2 x 16 (both end plates)
  • Signals
1.44 Mill-Max 8360 (long socket) x16
3.86 YSS-117-01-S-D x1
  • other components
1.00 HV cap  SMD/SMT 1812 1000pF 4KV 20% Tol. X7R x16
0.20 HV resistor CHV1206-FX-1004ELF 1206 1Meg 1.6kV 1% Tol x32
0.02 Resistor RMCF1206FT1M00 1206 1Meg 1% Tol x32
  • Production per card
 11.- PCB based on 50 cards
100.- Assembly based on 36 cards
 50.- Estimated part cost