EMMA: Difference between revisions

From DaqWiki
Jump to navigation Jump to search
m (26 revisions imported)
 
(22 intermediate revisions by the same user not shown)
Line 3: Line 3:
=== General info ===
=== General info ===


* https://midemma01.triumf.ca - EMMA MIDAS DAQ, username midas, password midas
* https://midemma01.triumf.ca - EMMA MIDAS DAQ
* https://midemma01.triumf.ca/rootana - EMMA analyzer (same password)
* https://midemma01.triumf.ca/rootana/ - EMMA analyzer
* https://elog.triumf.ca/emma - EMMA elog
* https://elog.triumf.ca/EMMA/ - EMMA elog


=== EMMA DAQ computers ===
=== EMMA DAQ computers ===


* midemma01 - main daq computer
* midemma01 - main daq computer in the ISAC2 CR#2 (TIGRESS)
* lxemma01 -EMMA VME processor
* midemma02 - terminal in ISAC2 on the table next to the EMMA platform
* daq03 - terminal computer on the platform
* lxemma01 -EMMA VME processor (in the VME crate on the EMMA platform)
 
Storage:
 
* 10TB ZFS volume on midemma01 mounted on the ISAC cluster machines as /emma/data1/emma


=== DAQ instructions ===
=== DAQ instructions ===
To start the DAQ:


* login emma@midemma01
* login emma@midemma01
Line 20: Line 26:
* go to the Programs page, start all programs in order
* go to the Programs page, start all programs in order
* go to the Status page, start a run, stop a run
* go to the Status page, start a run, stop a run
To start the analyzer:
* login emma@midemma01
* cd online/ana
* run ./emmana.exe -g -R8081
* if a run is active, watch the histograms update every 15 seconds on the canvases
* open web page: https://midemma01.triumf.ca/rootana/ (tailing slash is important!), watch the histograms on the web, click "monitoring" to enable periodic update.
* to rebuild the analyzer, edit emma_module.cxx, then run "make". Use "make clean" to remove old object files, etc. Commit changes using "git commit ."
To change PID gates:
* Open emma_module.h located in midemma01:~/packages/EMMA-Collaboration/emmana/include
* modify values in lines 32 to 56. Specifically, variables called Total_E_low & Total_E_high, eICtot_min & eICtot_max, for the ICsum+Silicon and ICsum gates, respectively.
* Save and stop/start rootana from the midas programs page.
=== TDC Channels ===
{| class="wikitable"
|-
! TDC Channel
! Signal
|-
| [0]
| PGAC Anode Top
|-
| [1]
| PGAC Anode Middle
|-
| [2]
| PGAC Anode Bottom
|-
| [3]
| PGAC Cathode Right
|-
| [4]
| PGAC Cathode Left
|-
| [5]
| PGAC Cathode Top
|-
| [6]
| PGAC Cathode Bottom
|-
| [7]
| Trigger (OR of Anodes)
|-
| [8]
| ISAC RF
|}
=== FAQ ===
If the DAQ crashes here are some suggested diagnostics checks:
* Check connection to feemma (VME crate): Type "ping lxemma01". If it does not respond then power cycle the VME crate at the focal plane.
* Check the status of the mlogger program: Sometimes an interrupted connection can cause problems with the mlogger program, which will result in being unable to restart a new run. Type "ps aux | grep mlogger". If multiple mlogger programs are running then midemma01 will need to be restarted. You must perform a hard restart by holding down the power button.
* Once both midemma01 and the VME crate are back up and running, follow the DAQ restart instructions listed above or type "start_daq.sh" in terminal.
=== Manuals ===
* TDC V1190 Manual: [[Image:V1190 REV14.pdf|thumb|Description]]
* MADC-32 Manual: [[Image:MADC-32.pdf|thumb|Description]]


=== Contact ===
=== Contact ===


* Barry
* Barry - davids
* Martin
* Matt - mwilliams
* Martin - malcorta
* Konstantin - olchansk (daq group)
* Thomas - lindner (daq group)


=== Other info ===
=== Other info ===


* main account: emma@isdaq00
* main account: emma@ISAC-NIS (physically on isdaq00)
* data directory: /home/emma/Experiments (physically on isdaq01)
 
online analyzer can be invoked from any directory using emmana.exe .

Latest revision as of 13:03, 7 January 2022

Information on EMMA DAQ

General info

EMMA DAQ computers

  • midemma01 - main daq computer in the ISAC2 CR#2 (TIGRESS)
  • midemma02 - terminal in ISAC2 on the table next to the EMMA platform
  • lxemma01 -EMMA VME processor (in the VME crate on the EMMA platform)

Storage:

  • 10TB ZFS volume on midemma01 mounted on the ISAC cluster machines as /emma/data1/emma

DAQ instructions

To start the DAQ:

  • login emma@midemma01
  • run "mhttpd -D"
  • open web page https://midemma01.triumf.ca
  • go to the Programs page, start all programs in order
  • go to the Status page, start a run, stop a run

To start the analyzer:

  • login emma@midemma01
  • cd online/ana
  • run ./emmana.exe -g -R8081
  • if a run is active, watch the histograms update every 15 seconds on the canvases
  • open web page: https://midemma01.triumf.ca/rootana/ (tailing slash is important!), watch the histograms on the web, click "monitoring" to enable periodic update.
  • to rebuild the analyzer, edit emma_module.cxx, then run "make". Use "make clean" to remove old object files, etc. Commit changes using "git commit ."

To change PID gates:

  • Open emma_module.h located in midemma01:~/packages/EMMA-Collaboration/emmana/include
  • modify values in lines 32 to 56. Specifically, variables called Total_E_low & Total_E_high, eICtot_min & eICtot_max, for the ICsum+Silicon and ICsum gates, respectively.
  • Save and stop/start rootana from the midas programs page.

TDC Channels

TDC Channel Signal
[0] PGAC Anode Top
[1] PGAC Anode Middle
[2] PGAC Anode Bottom
[3] PGAC Cathode Right
[4] PGAC Cathode Left
[5] PGAC Cathode Top
[6] PGAC Cathode Bottom
[7] Trigger (OR of Anodes)
[8] ISAC RF

FAQ

If the DAQ crashes here are some suggested diagnostics checks:

  • Check connection to feemma (VME crate): Type "ping lxemma01". If it does not respond then power cycle the VME crate at the focal plane.
  • Check the status of the mlogger program: Sometimes an interrupted connection can cause problems with the mlogger program, which will result in being unable to restart a new run. Type "ps aux | grep mlogger". If multiple mlogger programs are running then midemma01 will need to be restarted. You must perform a hard restart by holding down the power button.
  • Once both midemma01 and the VME crate are back up and running, follow the DAQ restart instructions listed above or type "start_daq.sh" in terminal.

Manuals

Contact

  • Barry - davids
  • Matt - mwilliams
  • Martin - malcorta
  • Konstantin - olchansk (daq group)
  • Thomas - lindner (daq group)

Other info

  • main account: emma@ISAC-NIS (physically on isdaq00)
  • data directory: /home/emma/Experiments (physically on isdaq01)

online analyzer can be invoked from any directory using emmana.exe .

Retrieved from "https://daq00.triumf.ca/DaqWiki/index.php?title=EMMA&oldid=4890"