ESP32: Difference between revisions
Jump to navigation
Jump to search
| Line 32: | Line 32: | ||
= ESP-WROOM-32 module = | = ESP-WROOM-32 module = | ||
* | * ESP32 chip is a very basic microcontroller, CPU is done by same people who did MIPS CPUs. | ||
* | * ESP32 is supported by "Mongoose OS", familiar with it as we already use the mongoose web server from same people. | ||
* | * general page: https://www.espressif.com/en/products/hardware/modules | ||
* | * product page: https://www.espressif.com/zh-hans/esp-wroom-32/resources (in Chineese) | ||
* data sheet: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_cn.pdf (in Chineese) | |||
* data sheet: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf (English) | |||
Information from adafruit: https://www.adafruit.com/product/3405 and https://learn.adafruit.com/adafruit-huzzah32-esp32-feather | Information from adafruit: https://www.adafruit.com/product/3405 and https://learn.adafruit.com/adafruit-huzzah32-esp32-feather | ||
Revision as of 13:51, 26 March 2020
Adafruit HUZZA32
- Adafruit HUZZAH32 – ESP32 Feather Board, https://www.adafruit.com/product/3405
- based on ESP-WROOM-32 module, uses ESP32-D0WDQ6 chip, https://en.wikipedia.org/wiki/ESP32
- board available from DigiKey quantity "hundreds" ~CAD$35
https://www.digikey.ca/product-detail/en/adafruit-industries-llc/3405/1528-2181-ND/7244967 https://www.digikey.ca/product-detail/en/adafruit-industries-llc/3591/1528-2514-ND/8119805
- USB power connector - connection for external 3.7 V battery, charged from USB - serial IO 3.3V RX+TX - 1x SPI (where is the rest?) - 1x I2C (where is the rest?) - 7 GPIO top, shared with 2 DACs and 6 ADCs - 7 GPIO bottom, shared with 7 ADCs and other functions - everything is 3.3V, *NOT* 5V safe - there is ADC1 and ADC2, not clear what it means, ADC voltage range not clear - ADC1 or ADC2 cannot be used with Wifi (this is unclear) - ESP32 SD card interface not connected - ESP32 serial IO connected to USB via USB-serial-bridge chip (the best I can tell) - power is USB with battery backup, one header pin provides regulated 3.3 V power to user (available current not clear, maybe 250 mA) , battery voltage is on A13
- suggested use with Ardiuno BSP (not mongoose OS)
- module schematic: https://cdn-learn.adafruit.com/assets/assets/000/041/630/original/feather_schem.png?1494449413
ESP-WROOM-32 module
- ESP32 chip is a very basic microcontroller, CPU is done by same people who did MIPS CPUs.
- ESP32 is supported by "Mongoose OS", familiar with it as we already use the mongoose web server from same people.
- general page: https://www.espressif.com/en/products/hardware/modules
- product page: https://www.espressif.com/zh-hans/esp-wroom-32/resources (in Chineese)
- data sheet: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_cn.pdf (in Chineese)
- data sheet: https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf (English)
Information from adafruit: https://www.adafruit.com/product/3405 and https://learn.adafruit.com/adafruit-huzzah32-esp32-feather
- 240 MHz CPU, 520 kbytes SRAM, Wifi, Bluetooth, 4 Mbyte flash, interface for SD card. - 3x UART - 3x SPI - 2x I2C - 12 ADC inputs - 2 DAC - more goodies - everything is 3.3V, *NOT* 5V safe