MVM-IT
Jump to navigation
Jump to search
Links
- MVM-IT MVM with Italian control board
- MVM-TR MVM with TRIUMF control board
- ESP32 - ESP32 information: adafruit HUZZA32, ESP-WROOM32 modules, arduino and IDF cross-compilers
- RPI3 - RPi information (SD cards, boot modes, etc)
- Project main page:
- http://mvm.care/
- letter from the Founder and Spokesperson http://mvm.care/wp-content/uploads/2020/04/Lettera-Aperta-Apr-12-2020-EN.pdf
- Main repositories:
- https://github.com/MechanicalVentilatorMilano/gui - GUI repository
- https://github.com/MechanicalVentilatorMilano/integration - esp32 firmware
- https://github.com/MechanicalVentilatorMilano/supervisor - supervisor firmware
- Additional repositories:
- https://github.com/MechanicalVentilatorMilano/mvm-control - mvm-control script to read MVM data (Bryerton)
- https://github.com/MechanicalVentilatorMilano/ControlBoard - hw_rev3 control board ([PDF file is here]
- https://gitlab.triumf.ca/mvmdev - TRIUMF gitlab repository
- https://gitlab.triumf.ca/mvmdev/gui - TRIUMF copy of mvm_gui (use branch ko_test)
- https://gitlab.triumf.ca/mvmdev/MVMFirmware - TRIUMF copy of mvm firmware (use branch ko_test)
- https://gitlab.triumf.ca/mvmdev/MVMFirmwareCpp - TRIUMF copy of MVMFirmwareCpp (use "ko" branches)
- https://gitlab.triumf.ca/mvmdev/controlboard/-/blob/master/board.pdf - board schematics from ControlBoard git repo
- https://gitlab.triumf.ca/mvmdev/GUIAutoBuild - RPi SD card image generator
Software Quality Assurance
Guiding documents:
- US FDA "emergency use authorization" - https://www.fda.gov/media/136423/download
Organized by Masa and Dave T.:
- main repository https://drive.google.com/drive/folders/19yd3cBtps8ZVCz-VJ8rMLKcV_b80WLdS
- task list (SQA Task List) https://docs.google.com/spreadsheets/d/19ZYdqxHZD_Z2tz578GtEhNLRfs_BdxoojMHiWyw6Nu4
- Software Requirement Specification Communication Protocol https://drive.google.com/file/d/1BfzPRSCjlMvuD0lyCnf98FgVY3Y6Tq7-/view
- SOFTWARE DESIGN DESCRIPTION OF THE INTERFACES https://drive.google.com/file/d/1X-zctXJN14Dob1ziR_mtMZAaQj3FLcSj/view
- Software Work Practice Coding Guideline https://docs.google.com/document/d/1SBw6FDcrIlc-SOpfWioNPTEWER3rW04eRpZBzZWJozA/edit
- Software Procedure Software Development Environment https://docs.google.com/document/d/18_WfIly3p-0-zvbXg3-mGAi8ha3BSTgwKL14qngbi6w/edit
- git repository and wiki: https://github.com/MechanicalVentilatorMilano/mvm-sqa/wiki
Additional repositories:
- SNOLAB sharepoint: https://snolab.sharepoint.com/sites/mvmcanada
MVMFirmwareCpp Code Review:
- scope: https://github.com/MechanicalVentilatorMilano/mvm-sqa/wiki/FirmwareCodeReview-Scope
- git issues: https://github.com/dd1dd1/MVMFirmwareCpp/issues
- doxygen V5: https://ladd00.triumf.ca/~olchansk/MVMFirmareCpp_V5_html/_m_v_m_firmware_core_8ino.html
- doxygen v0.1: https://ladd00.triumf.ca/~olchansk/MVMFirmareCpp_v0.1_html/_m_v_m_firmware_core_8ino.html
Documents under development:
- MVM manual: https://snolab.sharepoint.com/:b:/r/sites/mvmcanada/Shared%20Documents/Manufacturing/MVM%20Manuals/MVM_User_Manual%20(16).pdf?csf=1&web=1&e=kbLEQA
- TRIUMF Requirements for Software Development for Canada-MVM: https://triumfoffice365.sharepoint.com/:w:/r/sites/TRIUMFCOVIDVentilatorTeam/_layouts/15/guestaccess.aspx?e=4%3AwGXYeU&at=9&share=EWREZhBQ7sFAnOGswG1h43QBPvZqoTw_kPjHvAatRpKoJw
- CNL software requirements spec: https://drive.google.com/drive/folders/1E0ut8qkXw89QDiak_fINJ8YZVg-X9yJS
- unsigned MVM Top Level Requirements Specification: https://docs.google.com/document/d/1t9Q1N9lXn3beTZ9OJB4WQUkmIpByikOgQ0jR2diW5O8/edit
MVM Hardware tests:
MVM box
- File:Mvm-gas-wiring.pptx.pdf - MVM internals
- File:Mvm-ventillator23b.pdf - gas piping diagram
hw_rev3
Control board
Per board.pdf dated "4/13/20"
- external power supply:
- VLOGIC 24 VDC (up to 40VDC, LM2596, http://www.ti.com/lit/ds/symlink/lm2596.pdf)
- VPOWER ?? VDC (up to 40VDC, LT8609, https://www.analog.com/media/en/technical-documentation/data-sheets/LT8609-8609A-8609B.pdf)
- Adafruit HUZZA32 module (ESP-WROOM32 ESP32 microcontroller ESP32)
- 6 pressure sensors (5525DSO-DB001DS)
- 2 GPIO pins (J5, CH3, CH4, pull up to 3.3V)
- 2 push button inputs (J6, J7 BTN_1, BTN_2, pull up to 3.3V)
- 2 LED drivers (J8, J9 LED, BUZ, 5V)
- 2 "modulation control" (J10, J11)
- 2 "24V solid state relay" (J12, J13, OMRON_G3VM-61FR1)
- 2 I2C 3.3V (J14, J15)
- 2 I2C 5V (J16, J17)
- 1 ESP32 serial console (J18, 3.3V, RX, TX)
- 1 O2 sensor input (J19, OXY_IN)
- 1 SPI 3.3V (J20A)
System configurations
- "Italian model": [ MVM-IT + ESP32 ] ---- usb-serial ---- [ RPi + GUI ] (remote control) ---- wifi or cat5 or SD/USB flash for data collection
- "2.5 Pi": [ MVM-IT + ESP32 --- usb-serial --- RPi + GUI (local control) ] ---- cat5 ---- [ RPi + GUI ] (remote control)
Notable hardware limitations:
- ESP32: yes wifi, no cat5 ethernet, no usb, no sd flash (sd flash maybe via adafruit LCD "feather")
- RPi: cat5/rj45 ethernet, wifi, HDMI/DP, USB, SD flash slot.
Abbreviations: MVM-IT - Italian PCB, ESP32 - adafruit HUZZA32/WROOM32/ESP32 icrocontroller, RPi - RaspberryPi, GUI - medium size LCD running the MVM python GUI
ESP32 connections
!!! ALL GPIO PINS are 3.3V, NOT 5V safe !!!
ESP32 - link to the ESP32 page
- ESP32 power: per https://learn.adafruit.com/adafruit-huzzah32-esp32-feather/power-management, last "not recommended" option: "Connect an external 5V power supply to the USB and GND pins"
ESP32 pin and name - WROOM32 - HUZZA32 - header - schematic name - function
"JP1 16 pin"
42 - GPIO21 - IO21 - 21 - JP1-1 - CS - (output) SPI nCS - mux GPIO21 or VSPIHD
41 - U0TXD - TXD0 - TX/17 - JP1-2 - TX - ESP32 console - mux GPIO1 or U0TXD
40 - U0RXD - RXD0 - RX/16 - JP1-3 - RX - ESP32 console - mux GPIO3 or U0RXD
38 - GPIO19 - IO19 - MISO/19 - JP1-4 - MISO - (input) SPI MISO - mux GPIO19 or U0CTS or VSPIQ
35 - GPIO18 - IO18 - MOSI/18 - JP1-5 - MOSI - (output) SPI MOSI - mux GPIO18 or VSPICLK
34 - GPIO5 - IO5 - SCK/5 - JP1-6 - SCK - (output) SPI CLK - mux GPIO5 or VSPICS0
24 - GPIO4 - IO4/A2_0 - ADC2/A5/4 - JP1-7 - N/C - mux GPIO4 or RTC_GPIO10
5 - SENSOR_VP C16/270pF - IO36/SEN_VP/A1_0 - ADC1/A4/36 - JP1-8 - OXY_IN - (input only)
8 - SENSOR_VN C17/270pF - IO39/SEN_VN/A1_3 - ADC1/A3/39 - JP1-9 - BTN_2 - mux GPIO39 or RTC_GPIO3 (input only)
10 - VDET_1 - I34/A1_6 - ADC1/A2/34 - JP1-10 - BTN_1 - mux GPIO34 or RTC_GPIO4 (input only)
14 - GPIO25 - IO25/DAC1/A2_8 - ADC2/A1/DAC1/25 - JP1-11 - DAC1 - mux GPIO25 or RTC_GPIO6 or DAC1
15 - GPIO26 - IO26/DAC2/A2_9 - ADC2/A0/DAC2/26 - JP1-12 - DAC2 - mux GPIO26 or RTC_GPIO7 or DAC2
none - none - GND - JP1-13 - AGND - GND
none - none - NC - JP1-14 - N/C
none - none - "3V" - JP1-15 - "3V"
none - none - RST - JP1-16 - "RST"
"JP2 12 pin"
none - none - BAT - JP3-1 - N/C
none - none - EN - JP3-2 - N/C
none - none - USB - JP3-3 - "USB" - 5V USB input power
20 - MTCK - IO13/A2_4 - "red LED" ADC2/13/A12 - JP3-4 - LED - (output) mux GPIO13 or RTC_GPIO14
18 - MTDI - IO12/A2_5 - "internal pulldown, output only" ADC2/12/A11 - JP3-5 - BUZ - (output) mux GPIO12 or RTC_GPIO15 - "boot fail if pulled high"
16 - GPIO27 - IO27/A2_7 - ADC2/27/A10 - JP3-6 - CH4 - (output) mux GPIO27 or RTC_GPIO17
13 - 32K_XN - IO33/A1_5/X32N - ADC1/33/A9 - JP3-7 - CH3 - (output) mux GPIO33 or RTC_GPIO8
21 - MTDO - IO15/A2_3 - ADC2/15/A8 - JP3-8 - CH2 - (output) mux GPIO15 or RTC_GPIO13
12 - 32K_XP - IO32/A1_4/X32P - ADC1/32/A7 - JP3-9 - CH1 - (output) mux GPIO32 or RTC_GPIO9
17 - MTMS - IO14/A2_6 - ADC2/14/A6 - JP3-10 - "BATTERY" - pull up to 3.3V, mux GPIO14 or RTC_GPIO16 (note: ADC2 cannot be used if Wifi active)
39 - GPIO22 - IO22 - SCL/22 - JP3-11 - "SCL" - (I2C, pull up to 3.3V) - mux GPIO22 or U0RTS
36 - GPIO23 - IO23 - SDA/23 - JP3-12 - "SDA" - (I2C, pull up to 3.3V) - mux GPIO23
not on header, internally connected on HUZZA32:
11 - VDET_2 - I35/A1_7 - ADC1/35/A13 - N/C - VBAT voltmeter (through divider) - mux GPIO35 or ADC1_CH7 or RTC_GPIO5 (input only)
not clear what function:
23 - GPIO0 - IO0/A2_1 - GPIO0 - serial RTS - mux GPIO0 or RTC_GPIO11
22 - GPIO2 - IO2/A2_2 - GPIO2 - serial DTR (looks like mistake on schematic) - mux GPIO2 or RTC_GPIO12
25 - GPIO16 - IO16 - IO16 - not connected? - mux GPIO16 or U2RXD
27 - GPIO17 - IO17 - IO17 - not connected? - mux GPIO17 or U2TXD
9 - CHIP_PU - EN - RESET - push button - no mux
WROOM32 flash memory connection ("U3"):
28 - SD_DATA_2 - SD2 - n/c - mux SD_DATA2 or GPIO9
29 - SD_DATA_3 - SD3 - n/c - mux SD_DATA3 or GPIO10
30 - SD_CMD - CMD - n/c - mux SD_CMD or GPIO11
31 - SD_CLK - CLK - n/c - mux SD_CLK or GPIO6
32 - SD_DATA_0 - SD0 - n/c - mux SD_DATA0 or GPIO7
33 - SD_DATA_1 - SD1 - n/c - mux SD_DATA1 or GPIO8
Not connected to ESP32:
CPU AUX - (maybe output) direct connection to AUX screw terminal
Note:
- I2C controller can use any/all GPIO pins
- SPI controller can use any/all GPIO pins
I2C bus configuration
- ESP32 drives SCL_UC/SDA_UC, connected are:
- U9 "nano dac", part unknown, maybe not installed
- I2C mux TCA9548APWR (A0,A1,A2 tied to GND), output ports:
- 0 - 3V I2C J14
- 1 - 3V I2C J15
- 2 - 5V I2C J16
- 3 - 5V I2C J17
- 4 - PS1 (CSB tied to 3.3V), PS2 (CSB tied to GND)
- 5 - PS3, PS4 (same CSB)
- 6 - PS5, PS6 (same CSB) (maybe absent)
- 7 - N/C
I2C bus addresses
TO BE UPDATED
* 0x70 - I2C switch - U1 - TI TCA9548APWR [[https://edev-group.triumf.ca/hw/ventilator-controller/rev0/-/blob/master/Altium/Datasheets/tca9548a%20-%20I2C%20switch%208-channel.pdf Datasheet]]
* 0x76 - pressure sensor - i2c switch port 7 mask 0x80 - "TE Connectivity Measurement Specialties" 5525DSO-DB001DS [[https://edev-group.triumf.ca/hw/ventilator-controller/rev0/-/blob/master/Altium/Datasheets/MS5525DSO_D20-1%20pressure%20sensor.pdf Datasheet]]
* 0x80 - flow meter - i2c switch port 0 mask 0x01 - SFM3000 - https://gitlab.triumf.ca/mvmdev/mvmcontroller/-/blob/dev-esp32/docs/datasheets/Sensirion-Mass-Flow-Meters-SFM3000-I2C-Functional-Description.pdf https://gitlab.triumf.ca/mvmdev/mvmcontroller/-/blob/dev-esp32/docs/datasheets/Sensirion_Mass_Flow_Meters_SFM3000_Datasheet.pdf https://gitlab.triumf.ca/mvmdev/mvmcontroller/-/blob/dev-esp32/docs/datasheets/SFM3xxx_Extended_I2C_Command_Set.pdf
To probe the pressure sensor:
<pre>
$ i2cset -y 1 0x70 0 0x80
$ i2cget -y 1 0x70
0x80
$ i2cdetect -y 1 ### detects: 0x70 (switch) and 0x76 (pressure sensor)
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- -- -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: 70 -- -- -- -- -- 76 --
hw_rev4
Info from A.Abba
-------- Forwarded Message --------
Subject: R: desktop environment and coding guidance
Date: Sun, 3 May 2020 20:25:08 +0000
From: Andrea Abba <abba@nuclearinstruments.eu>
To: Pierre-A. Amaudruz <amaudruz@triumf.ca>, Alessandro Razeto
<alessandro.razeto@lngs.infn.it>
CC: Cristiano Galbiati <galbiati@princeton.edu>, Marc F Paterno
<paterno@fnal.gov>
Dear Pierre,
answering to your question is not streight forward as should be.
In the project the following microcontroller are involved:
* CONTROLLER: ESP32-WROOM-32. This is a IOT chip designed to be a
flexible wireless SoC (System on Chip). It is a dual core ARM 32 bit
chip
* SUPERVISOR: ATMEGA328P-MU. It is a 8 bit microcontroller extremely
used in several application.
Both microcontroller, as per initial specification, uses Arduino
enviromental. It does not simply mean that we use arduino ide to program
but it means that there is a layer between hardware and firmware that
abstract all microcontroller main functionalities.
Unfortunately is not very easy to track what happens in the arduino
layer. The tools have auto update functionalities but i can right now
make a snapshot of the situation on my computer
ESP32
Following items are involved:
* Arduino IDE: v1.8.12
* Community libraries: SimpliCLI 1.0.8, Wire 1.0.1
* ESP32 toolchain: xtensa-esp32-elf-gcc 1.22.0-80-g6c4433a-5.2.0
The module used is the Adafruit ESP32 Feather but on the board there is
also the possibility to direct soder the ESP32-WROOM-32 in the exact
configuration of the Feather board (so it's identical)
ATMEGA328P-MU
It is configured as Arduino PRO @ 3.3V 8MHz
* Arduino IDE: v1.8.12
* Community libraries: SoftWire (V3 the correct version is included in
the repository), Wire 1.0
* Toolchain: AVR GCC/G++ 7.3.0
Don't esitate to contact me if you need more information
------------------------------------------------------------------------
Control board
TBW, waiting for board schematics
Diagram from unknown source: https://ladd00.triumf.ca/~olchansk/block-diag-01.pdf
System architecture
valves, sensors ---i2c--- ESP32 ---esp32-u0-serial---serial-usb-bridge-|---usb-cable---|---RPi4B---|---LCD screen sensors,etc ---i2c--- "supervisor microcontroller" --- connected to TBW, waiting for board schematics
ESP32 connections
!!! ALL GPIO PINS are 3.3V, NOT 5V safe !!!
ESP32 - link to the ESP32 page
TBW, waiting for board schematics
I2C bus configuration
- ESP32 drives SCL_UC/SDA_UC, connected are:
TBW, waiting for board schematics
I2C bus addresses
TBW, waiting for board schematics
Supervisor Interface
uint16_t HW_V4::ReadSupervisor(uint8_t i_address) ... $ grep ReadSupervisor *.cpp fw_board_ni_v4.cpp: pIN = ((float)ReadSupervisor(0x50)); fw_board_ni_v4.cpp: currentBatteryCharge = (float)ReadSupervisor(0x51); fw_board_ni_v4.cpp: pWall = ReadSupervisor(0x52) >0 ? false : true ; fw_board_ni_v4.cpp: BoardTemperature = ((float)ReadSupervisor(0x56)/10.0); fw_board_ni_v4.cpp: HW_AlarmsFlags = (uint16_t)ReadSupervisor(0x57);
WriteSupervisor(0x00, 1); // reset supervisor watchdog WriteSupervisor(0x01, 1); // enable supervisor watchdogh
Pressure sensor
Calibration constants (chip on KO's board):
read by i2cget (addr 0xa0 through 0xae)
pi@raspberrypi:~ $ i2cget -y 1 0x76 0xa0 w 0x0100
read by sensors.exe (branch dev-linux)
pressure sensor PROM 0x00: 0x0001 pressure sensor PROM 0x01: 0x392b pressure sensor PROM 0x02: 0x1e52 pressure sensor PROM 0x03: 0x0e25 pressure sensor PROM 0x04: 0x071a pressure sensor PROM 0x05: 0x943d pressure sensor PROM 0x06: 0x1f6b pressure sensor PROM 0x07: 0x000c mvm_hal_init: PS1 CRC4 OK!
- read ADC, no conversion
root@raspberrypi:~/i2c-tools-4.1/tools# ./i2cget3 -y 1 0x76 0 write returned 1 read returned 4, value 0x3f000000
- read ADC, pressure
i2cset -y 1 0x76 0x48 root@raspberrypi:~/i2c-tools-4.1/tools# ./i2cget3 -y 1 0x76 0 write returned 1 read returned 4, value 0x3f900a44
- read ADC, temperature
i2cset -y 1 0x76 0x58 root@raspberrypi:~/i2c-tools-4.1/tools# ./i2cget3 -y 1 0x76 0 write returned 1 read returned 4, value 0x3f9c424d
Flow sensor
TBW
Proportional Valve ArduinoCorePP_PWM_hw_v3 firmware
- From Bryerton:
The Italian's use the PWM on DAC1 / A0 / IO25 pin. The API is the ledc API used to control an LED via PWM
- see ArduinoCorePP_PWM_hw_v3.ino
- function setup() attach pin "DAC1" to ledc
ledcSetup(0, 10000, 12); // KO: chan 0, freq in kHz, how many bits of PWM 12 bits = range 0..4095 ledcAttachPin(DAC1, 0); // KO: IO25/A0/DAC1 ledcWrite(0, 0);
- function PressureControlLoop_PRESSIN() see ledcWrite()
if (Pset == 0) {
ledcWrite(0, 0);
} else {
pid_outb = ...; // KO: looks like a digital PID controller
if (pid_outb<0) pid_outb=0; // KO: low limit
pid_outb = pid_outb + 500; // KO: what is this?!?
if (pid_outb>4090) pid_outb=4090; // KO: high limit
ledcWrite(0, pid_outb); // KO: value 500..4090
}
- also see valve_control() commented absent code for PWM.
MVM-GUI
Code review
- pdoc diagrams - https://home.fnal.gov/~mwang/mvm/sqa/gui/html/index.html
Install
- as root:
- apt-get update
- apt-get install python3-pyqt5 python3-numpy python3-scipy
- ### does not work, installs wrong pip: apt-get install python3-pip
- curl https://bootstrap.pypa.io/get-pip.py -o get-pip.py
- python3 get-pip.py --force-reinstall
- /usr/bin/python3 -m pip install --upgrade pip ### pip 20.1.1
- ### does not work, installs too-old version of yaml 3.13: apt-get install python3-yaml
- pip3 install PyYAML ### version 5.3.1
- pip3 install crc8 ### version 0.1.0
- pip3 install PySerial ### version 3.4
- pip3 install PyQtGraph ### 0.11.0
- ssh pi@rpi
- #git clone https://github.com/MechanicalVentilatorMilano/gui.git
- #git clone https://gitlab.triumf.ca/mvmdev/gui.git
- #git checkout ko_test
- git clone git@github.com:MechanicalVentilatorMilano/gui.git ### only members of github "MVM project" can access!
Run with python simulator
- cd gui
- ./mvm_gui.py fakeESP32
Run with ESP32 simulator
- load the ardiuno sketch mock/mock.ino into ESP32 (see instructions below)
- ./mvm_gui.py ### default connection is /dev/ttyUSB0 at 115200 bps, change it in default_settings.yaml
Run with "integration" firmware
- cd gui
- ./mvm_gui.py skipTests
debug functions
- to look at pressure sensor data:
pi@142j90j121j110:~/gui $ git diff
diff --git a/gui/default_settings.yaml b/gui/default_settings.yaml
index dcfbe27..7a5ffc7 100644
--- a/gui/default_settings.yaml
+++ b/gui/default_settings.yaml
@@ -8,7 +8,7 @@ settings_file_path: '/storage/pi/settings.txt'
# The returned dict will use those as keys. Order matters.
get_all_fields:
- pressure
- - flow
+ - _pi1
- o2
- bpm
- tidal
@@ -362,7 +362,7 @@ plots:
max: 20
units: "[slpm]"
color: "rgb(0,255,255)"
- observable: flow
+ observable: _pi1
#
# PCV Mode
#
MVMFirmware monolithic hw_rev3, hw_rev4
Prepare
- install arduino: https://daq.triumf.ca/DaqWiki/index.php/ESP32#Arduino_IDE
Build and Flash
- ssh pi@...
- ### use TRIUMF gitlab branch ko_test instead ### git clone https://github.com/NuclearInstruments/MVMFirmware.git
- git clone https://gitlab.triumf.ca/mvmdev/MVMFirmware.git
- git checkout ko_test
- cd arduino; ./ardiuno
- open .../MVMFirmware/ArduinoCorePP_PWM_hw_v3/ArduinoCorePP_PWM_hw_v3.ino
- install library SimpleCLI (1.0.9), aREST (2.8.0)
- build sketch (there is warnings about TwoWire::requestFrom())
- load sketch
Connect and Use manually
- use Ardiuno tools -> serial console, set: serial 115200
- or use minicom, set /dev/ttyUSB0, 115200 bps, no flow control
- output on a base esp32 (no baseboard, no hardware, no sensors, etc)
ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:1044 load:0x40078000,len:8896 load:0x40080400,len:5816 entry 0x400806ac SCAN I2C BUS: 0 Scanning... I2C No I2C devices found SCAN I2C BUS: 1 Scanning... I2C No I2C devices found SCAN I2C BUS: 2 Scanning... I2C No I2C devices found SCAN I2C BUS: 3 Scanning... I2C No I2C devices found SCAN I2C BUS: 4 Scanning... I2C No I2C devices found SCAN I2C BUS: 5 Scanning... I2C No I2C devices found SCAN I2C BUS: 6 Scanning... I2C No I2C devices found SCAN I2C BUS: 7 Scanning... I2C No I2C devices found SENSOR: 0 SENS_T1: 65535 OFF_T1: 65535 TCS: 65535 TCO: 65535 TREF: 65535 TEMPSENS: 65535 OFFSET: 0.00 SENSOR: 1 SENS_T1: 65535 OFF_T1: 65535 TCS: 65535 TCO: 65535 TREF: 65535 TEMPSENS: 65535 OFFSET: 0.00 SENSOR: 2 SENS_T1: 65535 OFF_T1: 65535 TCS: 65535 TCO: 65535 TREF: 65535 TEMPSENS: 65535 OFFSET: 0.00 SENSOR: 3 SENS_T1: 65535 OFF_T1: 65535 TCS: 65535 TCO: 65535 TREF: 65535 TEMPSENS: 65535 OFFSET: 0.00 SFM driver version 0.1.0 SFM sensor probing failed ... Measure Flow Sensor initialized!
- send: "get all", reply: "valore=0.00,0.00,0,0,0,0,0,0,1"
Connect and read data using mvm-control
Follow the README file at: https://github.com/MechanicalVentilatorMilano/mvm-control
MVMFirmwareCpp
Prepare
- install arduino: https://daq.triumf.ca/DaqWiki/index.php/ESP32#Arduino_IDE
- install arduino library SimpleCLI (1.0.9)
Build and Flash
- ssh pi@...
- ### git clone git@github.com:NuclearInstruments/MVMFirmwareCpp.git
- git clone git@github.com:dd1dd1/MVMFirmwareCpp.git ### Konstantin's github via ssh
- git clone https://github.com/dd1dd1/MVMFirmwareCpp.git ### Konstantin's github via https
- cd MVMFirmwareCpp
- git checkout ko1 ### get the "V5" firmware
- git checkout v0.1_ko2 ### git the "v0.1" firmware
- ~/arduino-1.8.12/arduino MVMFirmwareCore.ino
- install library SimpleCLI (1.0.9)
- build sketch
- firmware tag "V5" and "v0.1" will fail with error about missing arduino.h. Please use tag "V5_ko1a" or "v0.1_ko2a" instead from Konstantin's github.
- upload sketch into esp32
Connect and Use manually
- use Ardiuno tools -> serial console, set: serial 115200
- or use minicom, set /dev/ttyUSB0, 115200 bps, no flow control
- output on a base esp32 (no baseboard, no hardware, no sensors, etc)
...
- send: "get all", reply: "valore=..."
Connect and read data using mvm-control
Follow the README file at: https://github.com/MechanicalVentilatorMilano/mvm-control
- git clone https://github.com/MechanicalVentilatorMilano/mvm-control.git
- cd mvm-control
- python mvm_control.py -p /dev/ttyUSB0 log
{"time":1.717,"p_patient":0.00,"f_total":0.00,"o2":100.00,"bpm":0.00,"v_total":0.00,"peep":0.00,"temp":0.00,"bat_pwr":1,"bat_charge":100.00,"p_peak":0.00,"v_total_insp":0.00,"v_total_exhl":0.00,"f_peak":0.00},
...
Connect with mvm_gui
See below for instructions to install mvm_gui
- cd gui/gui
- ./mvm_gui.py
MVMFirmware "integration"
- note1: only members of github "MVM project" can see and access the repositories
- note2: from here: https://github.com/MechanicalVentilatorMilano/integration
- install arduino-cli (to $HOME/bin), see https://arduino.github.io/arduino-cli/installation/
curl -fsSL https://raw.githubusercontent.com/arduino/arduino-cli/master/install.sh | sh
- install arduino libraries
arduino-cli lib install CRC32 ### version 2.0.0 arduino-cli lib install CircularBuffer ### version 1.3.3 arduino-cli lib install AsyncDelay ### version 1.1.0
- clone and build the firmware
mkdir -p mvm cd mvm git clone git@github.com:MechanicalVentilatorMilano/integration.git cd integration git submodule sync git submodule init git submodule update make
- load arduino sketch into esp32
arduino-cli upload ./framework --fqbn "esp32:esp32:featheresp32:FlashFreq=80,UploadSpeed=115200,DebugLevel=none,PartitionScheme=default" -p /dev/ttyUSB0
- watch it run, "tail -100f /dev/ttyUSB0" or minicom. no flow control, 115200 bps. (firmware prints nothing after the "load..." and "entry..." messages.
eeprom utility
- build and run the eeprom utility to setup a new control board:
pi@raspberrypi:~/integration $ make eeprom arduino-cli compile --warnings all --build-properties "compiler.warning_flags.all=-Wall -Wextra" --fqbn "esp32:esp32:featheresp32:FlashFreq=80,UploadSpeed=115200,DebugLevel=none,PartitionScheme=default" --build-properties "build.defines=-DMVM" --libraries /home/pi/integration/libraries libraries/hal/examples/eeprom Sketch uses 227157 bytes (17%) of program storage space. Maximum is 1310720 bytes. Global variables use 16668 bytes (5%) of dynamic memory, leaving 311012 bytes for local variables. Maximum is 327680 bytes. pi@raspberrypi:~/integration $ make eeprom.upload; tail -100f /dev/ttyUSB0 arduino-cli upload libraries/hal/examples/eeprom --fqbn "esp32:esp32:featheresp32:FlashFreq=80,UploadSpeed=115200,DebugLevel=none,PartitionScheme=default" -p /dev/ttyUSB0
- bare esp32 ... in minicom:
ets Jun 8 2016 00:22:57 rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT) configsip: 0, SPIWP:0xee clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00 mode:DIO, clock div:1 load:0x3fff0018,len:4 load:0x3fff001c,len:1044 load:0x40078000,len:8896 load:0x40080400,len:5816 entry 0x400806ac A 0 8 A 1 8 A 2 8 A 3 8 A 4 8 A 5 8 A 6 8 S 0 8 S 1 8 S 2 8 S 3 8 S 4 8 S 5 8 S 6 8 S 7 8 S 8 8 S 9 8 Done programming H C 199 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 1 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 2 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 3 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 4 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 5 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 6 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 ACT 7 crc 0 type F subtype 0 inv 0 pin 0 dfl 0 id 0 status 8 SNS 0 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 1 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 2 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 3 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 4 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 5 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 6 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 7 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 8 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 9 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8 SNS 10 crc 0 type F subtype 0 id 0 bus 0 mux 0 addr 0 status 8
- control board "rev 4"
Done programming H C 199 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 0 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 0 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 0 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 0 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 0 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 0 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 SNS 0 crc A1 type 0 subtype 0 id 0 bus 0 mux 2 addr 77 status 0 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 0 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 0 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 0 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 0 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 0 SNS 6 crc 43 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 0 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 0 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 0 SNS 9 crc BC type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0 SNS 10 crc BC type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0
- test
Done programming H C 199 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 0 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 0 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 0 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 0 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 0 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 0 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 SNS 0 crc C8 type 1 subtype 2 id 0 bus 0 mux 2 addr 77 status 0 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 0 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 0 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 0 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 0 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 0 SNS 6 crc 43 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 0 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 0 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 0 SNS 9 crc BC type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0 SNS 10 crc BC type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0
- test
Done programming H C 199 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 0 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 0 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 0 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 0 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 0 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 0 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 SNS 0 crc AE type 1 subtype 2 id 0 bus 0 mux 2 addr 28 status 0 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 0 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 0 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 0 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 0 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 0 SNS 6 crc 43 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 0 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 0 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 0 SNS 9 crc BC type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0 SNS 10 crc BC type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0
- armdaq10, git tag v0.9-1 (triumf-ko3a)
Done programming H C 78 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 0 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 0 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 0 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 0 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 0 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 0 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 SNS 0 crc A1 type 0 subtype 0 id 0 bus 0 mux 2 addr 77 status 0 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 0 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 0 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 0 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 0 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 0 SNS 6 crc 15 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 0 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 0 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 0 SNS 9 crc 4F type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0 SNS 10 crc 4F type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0
- armdaq09, git tag v0.9-1 (triumf-ko3a)
Done programming H C 78 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 0 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 0 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 0 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 0 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 0 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 0 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 0 SNS 0 crc A1 type 0 subtype 0 id 0 bus 0 mux 2 addr 77 status 0 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 0 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 0 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 0 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 0 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 0 SNS 6 crc 15 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 0 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 0 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 0 SNS 9 crc 4F type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0 SNS 10 crc 4F type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 0
- armdaq10, git tag v0.9-2 (triumf-ko4a)
A 0 1 A 1 1 A 2 1 A 3 1 A 4 1 A 5 1 A 6 1 S 0 1 S 1 1 S 2 1 S 3 1 S 4 1 S 5 1 S 6 1 S 7 1 S 8 1 S 9 1 Done programming H C 78 K 49 A 7 S 10 SDA 16 SCL 27 ACT 0 crc 43 type 0 subtype 1 inv 1 pin 19 dfl 0 id 0 status 1 ACT 1 crc 45 type 0 subtype 0 inv 1 pin 20 dfl 0 id 20 status 1 ACT 2 crc C4 type 0 subtype 0 inv 0 pin 4 dfl 0 id 30 status 1 ACT 3 crc 2E type 0 subtype 0 inv 0 pin D dfl 0 id 40 status 1 ACT 4 crc F5 type 0 subtype 0 inv 0 pin 11 dfl 0 id 50 status 1 ACT 5 crc DB type 0 subtype 0 inv 0 pin C dfl 0 id 60 status 1 ACT 6 crc 41 type 0 subtype 0 inv 0 pin 15 dfl 0 id 70 status 1 ACT 7 crc 41 type F subtype 0 inv 0 pin 15 dfl 0 id 70 status 2 SNS 0 crc A1 type 0 subtype 0 id 0 bus 0 mux 2 addr 77 status 2 SNS 1 crc DE type 0 subtype 0 id 10 bus 0 mux 1 addr 77 status 2 SNS 2 crc 4B type 1 subtype 2 id 20 bus 1 mux FFFFFFFF addr 28 status 2 SNS 3 crc 7F type 4 subtype 0 id 40 bus 0 mux 5 addr 0 status 2 SNS 4 crc 33 type 6 subtype 0 id 60 bus 0 mux 3 addr 0 status 2 SNS 5 crc E4 type 2 subtype 0 id 70 bus 0 mux 4 addr 49 status 2 SNS 6 crc 15 type 2 subtype 0 id FFFFFF80 bus 0 mux 4 addr 48 status 2 SNS 7 crc 6A type 5 subtype 1 id FFFFFFA0 bus FFFFFFFF mux 0 addr 27 status 2 SNS 8 crc B9 type 5 subtype 1 id FFFFFFB0 bus FFFFFFFF mux 0 addr 22 status 2 SNS 9 crc 4F type 5 subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 2 SNS 10 crc 4F type F subtype 0 id FFFFFFC0 bus FFFFFFFF mux 0 addr F status 3
HAL utility
The HAL utility prints values of all sensors & etc:
- build:
pi@raspberrypi:~/integration $ make HAL arduino-cli compile --warnings all --build-properties "compiler.warning_flags.all=-Wall -Wextra" --fqbn "esp32:esp32:featheresp32:FlashFreq=80,UploadSpeed=115200,DebugLevel=none,PartitionScheme=default" --build-properties "build.defines=-DMVM" --libraries /home/pi/integration/libraries libraries/hal/examples/HAL Sketch uses 238185 bytes (18%) of program storage space. Maximum is 1310720 bytes. Global variables use 16476 bytes (5%) of dynamic memory, leaving 311204 bytes for local variables. Maximum is 327680 bytes. pi@raspberrypi:~/integration $ make HAL.upload; tail -100f /dev/ttyUSB0 arduino-cli upload libraries/hal/examples/HAL --fqbn "esp32:esp32:featheresp32:FlashFreq=80,UploadSpeed=115200,DebugLevel=none,PartitionScheme=default" -p /dev/ttyUSB0
- bare esp32
outputs 0 sensors PI1 0.00 -100 PI2 0.00 -100 PI3 0.00 -100 SF1 0.00 -100 Vsys 0.00 -100 Vrpi 0.00 -100 Vsup 0.00 -100 Vref 0.00 -100 FIO 0.00 -100 Vref2 0.00 -100 Batt 0.00 -100 PI5 0.00 -100 Vpwr 0.00 -100 Vcnt 0.00 -100 BPwr 0.00 -100 outputs 1
- control board "rev 4", notice failure of PI2, PI3, SF1
outputs 0 sensors PI1 -87.19 0 PI2 -1.47 -5 PI3 -1.18 -1 SF1 -239.94 2 Vsys 11.74 0 Vrpi 4.97 0 Vsup 3.32 0 Vref 2.50 0 FIO 16.81 0 Vref2 2.50 0 Batt 94.80 0 PI5 1157.88 0 Vpwr 10.35 0 Vcnt 4.51 0 BPwr 2.00 0 outputs 1
- armdaq10 control board "rev 4", notice no error all drivers (good)
outputs 0 sensors PI1 -121.42 0 PI2 17.28 0 PI3 32.21 0 SF1 0.83 0 Vsys 11.77 0 Vrpi 4.97 0 Vsup 3.32 0 Vref 2.50 0 FIO 4.19 0 Vef2 2.50 0 Batt 94.79 0 PI5 4805.77 0 Vpwr 10.81 0 Vcnt 4.64 0 BPwr 2.00 0 outputs 1
- armdaq09 control board "rev 4", notice no error all drivers (good)
outputs 1 sensors PI1 -87.36 0 PI2 -1.45 0 PI3 0.68 0 SF1 133.28 0 Vsys 11.72 0 Vrpi 4.95 0 Vsup 3.32 0 Vref 2.50 0 FIO 17.55 0 Vref2 2.50 0 Batt 94.30 0 PI5 4814.60 0 Vpwr 10.48 0 Vcnt 4.54 0 BPwr 2.00 0 outputs 0 sensors
- armdaq10, git tag v0.9-1 (triumf-ko3a)
>> Sysfail: 1 >> Outputs 0 >> Sensors PI1 -0.35 0 PI2 0.04 0 PI3 -0.03 0 SF1 -0.01 0 Vsys 11.80 0 Vrpi 4.97 0 Vsup 3.32 0 Vref 2.50 0 FIO 19.89 0 Vref2 2.50 0 Batt 95.22 0 PI5 5405.11 0 Vpwr 11.00 0 Vcnt 4.64 0 BPwr 1.00 0 >> Sysfail: 1 >> Outputs 1 >> Sensors
- armdaq09, git tag git tag v0.9-1 (triumf-ko3a), after replacement of PI1
>> Sysfail: 0 >> Outputs 1 >> Sensors PI1 4.62 0 PI2 5.75 0 PI3 11.29 0 SF1 -0.25 0 Vsys 11.72 0 Vrpi 4.95 0 Vsup 3.32 0 Vref 2.50 0 FIO 19.72 0 Vref2 2.50 0 Batt 94.34 0 PI5 2162.29 0 Vpwr 10.50 0 Vcnt 4.52 0 BPwr 0.00 0 >> Sysfail: 0 >> Outputs 0 >> Sensors
- mvmhub01 (added sensor temperatures)
>> Outputs 0 >> Sensors PI1 0.04 0 PI1_t 32.42 0 PI2 -0.00 0 PI2_t 31.84 0 PI3 -0.02 0 PI3_t -0.02 0 SF1 -0.04 0 SF1_t 31.47 0 Vsys 11.80 0 Vrpi 4.96 0 Vsup 3.32 0 Vref 2.50 0 FIO 23.57 0 Vref2 2.50 0 Batt 95.03 0 PI5 574.32 0 Vpwr 11.02 0 Vcnt 4.64 0 BPwr 0.00 0 >> Sysfail: 0 >> Outputs 1
- armdaq09
>> Outputs 1 >> Sensors PI1 4.37 0 PI1_t 29.09 0 PI2 10.36 0 PI2_t 28.29 0 PI3 18.09 0 PI3_t 18.09 0 SF1 124.32 0 SF1_t 26.77 0 Vsys 11.77 0 Vrpi 4.97 0 Vsup 3.32 0 Vref 2.50 0 FIO 21.80 0 Vref2 2.50 0 Batt 94.67 0 PI5 4121.05 0 Vpwr 10.38 0 Vcnt 4.51 0 BPwr 0.00 0 >> Sysfail: 0 >> Outputs 0
MS5525DSO-MUX utility
- run the MS5525 utility:
killall python3 ### kill mvm_gui git checkout triumf-ko-MS5525DSO-MUX git submodule update git status ### should see no changes, no "M" entries make MS5525DSO-MUX make MS5525DSO-MUX.upload; minicom ### ctrl-A, Z, X to exit
- armdaq09 defective PI1 pressure sensor, before repair
calib[0]: 0x3e0f calib[1]: 0x244e calib[2]: 0x0f1b calib[3]: 0x0925 calib[4]: 0xad8e calib[5]: 0x1e65 d2: 0x00e51254 d1: 0x003b373c, old d2: 0x00e51254 d2: 0x00e512d4 d1: 0x003b3e94, old d2: 0x00e512d4 d2: 0x00e513bc d1: 0x003b4084, old d2: 0x00e513bc d2: 0x00e5143c d1: 0x003b3e1c, old d2: 0x00e5143c d2: 0x00e512d4 d1: 0x003b3db4, old d2: 0x00e512d4 d2: 0x00e51414 d1: 0x003b3db4, old d2: 0x00e51414 d2: 0x00e5153c d1: 0x003b3e8c, old d2: 0x00e5153c d2: 0x00e51424 d1: 0x003b3ea4, old d2: 0x00e51424 d2: 0x00e5148c d1: 0x003b3ea4, old d2: 0x00e5148c d2: 0x00e51504 d1: 0x003b3e9c, old d2: 0x00e51504 calib[0]: 0x3bbc calib[1]: 0x257d calib[2]: 0x0efd calib[3]: 0x08ce calib[4]: 0xa50b calib[5]: 0x1ef9 d2: 0x0054e33c d1: 0x004fd57c, old d2: 0x0054e33c d2: 0x0054e40c d1: 0x004fd4ec, old d2: 0x0054e40c d2: 0x0054e4b4 d1: 0x004fd20c, old d2: 0x0054e4b4 d2: 0x0054e564 d1: 0x004fd45c, old d2: 0x0054e564 d2: 0x0054e63c d1: 0x004fd38c, old d2: 0x0054e63c d2: 0x0054e724 d1: 0x004fd424, old d2: 0x0054e724 d2: 0x0054e79c d1: 0x004fd2f4, old d2: 0x0054e79c d2: 0x0054e814 d1: 0x004fd49c, old d2: 0x0054e814 d2: 0x0054e73c d1: 0x004fd28c, old d2: 0x0054e73c d2: 0x0054e85c d1: 0x004fd3dc, old d2: 0x0054e85c 0 -87.32 366.02 0 1 -1.51 25.91 0 d1: 0x003b3d14, old d2: 0x00e51504 0 -87.35 366.02 0 d1: 0x004fd494, old d2: 0x0054e85c 1 -1.50 25.91 0 d1: 0x003b3d2c, old d2: 0x00e51504 0 -87.35 366.02 0 d1: 0x004fd4d4, old d2: 0x0054e85c 1 -1.50 25.91 0 d1: 0x003b3d84, old d2: 0x00e51504 0 -87.34 366.02 0 d1: 0x004fd3ac, old d2: 0x0054e85c 1 -1.52 25.91 0 d1: 0x003b3dbc, old d2: 0x00e51504 0 -87.34 366.02 0 d1: 0x004fd384, old d2: 0x0054e85c 1 -1.52 25.91 0 d1: 0x003b3c14, old d2: 0x00e51504 0 -87.37 366.02 0 d1: 0x004fd3ac, old d2: 0x0054e85c 1 -1.52 25.91 0 d1: 0x003b3c3c, old d2: 0x00e51504 0 -87.37 366.02 0 d1: 0x004fd37c, old d2: 0x0054e85c 1 -1.52 25.91 0 d1: 0x003b3f44, old d2: 0x00e51504 0 -87.31 366.02 0 d1: 0x004fd2ec, old d2: 0x0054e85c 1 -1.52 25.91 0
- armdaq10 defective PI1 pressure sensor before repair, notice d2 always reads 0x00fe10a4
calib[0]: 0x3a22 calib[1]: 0x23bb calib[2]: 0x0e88 calib[3]: 0x09f1 calib[4]: 0xabce calib[5]: 0x1e48 d2: 0x00fe10a4 d1: 0x003bfa94, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b68c4, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b6bdc, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b6cac, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b6d44, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b6fa4, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b6fec, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b7004, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b7014, old d2: 0x00fe10a4 d2: 0x00fe10a4 d1: 0x003b70ec, old d2: 0x00fe10a4 calib[0]: 0x3b30 calib[1]: 0x2392 calib[2]: 0x0ecd calib[3]: 0x08a2 calib[4]: 0xab49 calib[5]: 0x1ea4 d2: 0x0059480c d1: 0x004c2aa4, old d2: 0x0059480c d2: 0x00594ac4 d1: 0x004c2bec, old d2: 0x00594ac4 d2: 0x00594a0c d1: 0x004c2a54, old d2: 0x00594a0c d2: 0x00594bd4 d1: 0x004c2c74, old d2: 0x00594bd4 d2: 0x00594bfc d1: 0x004c2adc, old d2: 0x00594bfc d2: 0x00594c2c d1: 0x004c2b74, old d2: 0x00594c2c d2: 0x00594d5c d1: 0x004c2c34, old d2: 0x00594d5c d2: 0x00594c54 d1: 0x004c2a84, old d2: 0x00594c54 d2: 0x00594e1c d1: 0x004c2aec, old d2: 0x00594e1c d2: 0x00594ddc d1: 0x004c2b54, old d2: 0x00594ddc 0 -120.91 427.37 0 1 -2.39 28.98 0 d1: 0x003b7014, old d2: 0x00fe10a4 0 -120.92 427.37 0 d1: 0x004c2a74, old d2: 0x00594ddc 1 -2.41 28.98 0 d1: 0x003c173c, old d2: 0x00fe10a4 0 -117.45 427.37 0 d1: 0x004c2b3c, old d2: 0x00594ddc 1 -2.39 28.98 0 d1: 0x003bf24c, old d2: 0x00fe10a4 0 -118.22 427.37 0 d1: 0x004c2b0c, old d2: 0x00594ddc 1 -2.40 28.98 0 d1: 0x003bf9ec, old d2: 0x00fe10a4 0 -118.06 427.37 0 d1: 0x004c29e4, old d2: 0x00594ddc 1 -2.41 28.98 0 d1: 0x003bfa2c, old d2: 0x00fe10a4 0 -118.06 427.37 0 d1: 0x004c2abc, old d2: 0x00594ddc 1 -2.40 28.98 0
- armdaq09, after replacement of PI1
calib[0]: 0x3809 calib[1]: 0x1e7f calib[2]: 0x0d7f calib[3]: 0x07c6 calib[4]: 0x8d1c calib[5]: 0x1fda d2: 0x0049e2fc d1: 0x00457594, old d2: 0x0049e2fc d2: 0x0049e524 d1: 0x004578fc, old d2: 0x0049e524 d2: 0x0049e63c d1: 0x004577a4, old d2: 0x0049e63c d2: 0x0049e6bc d1: 0x00457804, old d2: 0x0049e6bc d2: 0x0049e544 d1: 0x004578e4, old d2: 0x0049e544 d2: 0x0049e7c4 d1: 0x00457984, old d2: 0x0049e7c4 d2: 0x0049e64c d1: 0x004576e4, old d2: 0x0049e64c d2: 0x0049e7cc d1: 0x00457a94, old d2: 0x0049e7cc d2: 0x0049ea0c d1: 0x004579d4, old d2: 0x0049ea0c d2: 0x0049e784 d1: 0x00457844, old d2: 0x0049e784 calib[0]: 0x3bbc calib[1]: 0x257d calib[2]: 0x0efd calib[3]: 0x08ce calib[4]: 0xa50b calib[5]: 0x1ef9 d2: 0x0055846c d1: 0x004fd034, old d2: 0x0055846c d2: 0x005584ac d1: 0x004fcfcc, old d2: 0x005584ac d2: 0x0055864c d1: 0x004fd134, old d2: 0x0055864c d2: 0x00558674 d1: 0x004fd1cc, old d2: 0x00558674 d2: 0x005588b4 d1: 0x004fd19c, old d2: 0x005588b4 d2: 0x00558814 d1: 0x004fd004, old d2: 0x00558814 d2: 0x0055892c d1: 0x004fd194, old d2: 0x0055892c d2: 0x00558adc d1: 0x004fd1d4, old d2: 0x00558adc d2: 0x00558794 d1: 0x004fd234, old d2: 0x00558794 d2: 0x005589dc d1: 0x004fd184, old d2: 0x005589dc 0 -0.76 28.54 0 1 -1.50 27.48 0 d1: 0x00457514, old d2: 0x0049e784 0 -0.79 28.54 0 d1: 0x004fceec, old d2: 0x005589dc 1 -1.54 27.48 0 d1: 0x004576f4, old d2: 0x0049e784 0 -0.77 28.54 0 d1: 0x004fd244, old d2: 0x005589dc 1 -1.50 27.48 0 d1: 0x004577bc, old d2: 0x0049e784 0 -0.76 28.54 0 d1: 0x004fcf8c, old d2: 0x005589dc 1 -1.53 27.48 0 d1: 0x00457664, old d2: 0x0049e784 0 -0.78 28.54 0 d1: 0x004fcff4, old d2: 0x005589dc 1 -1.52 27.48 0 d1: 0x00457714, old d2: 0x0049e784 0 -0.77 28.54 0 d1: 0x004fd09c, old d2: 0x005589dc 1 -1.52 27.48 0 d1: 0x004576f4, old d2: 0x0049e784 0 -0.77 28.54 0 d1: 0x004fd0ac, old d2: 0x005589dc 1 -1.52 27.48 0 d1: 0x00457654, old d2: 0x0049e784 0 -0.78 28.54 0 d1: 0x004fd244, old d2: 0x005589dc 1 -1.50 27.48 0 d1: 0x004576ac, old d2: 0x0049e784 0 -0.77 28.54 0 d1: 0x004fd124, old d2: 0x005589dc 1 -1.51 27.48 0 d1: 0x0045750c, old d2: 0x0049e784 0 -0.79 28.54 0 d1: 0x004fd1dc, old d2: 0x005589dc 1 -1.50 27.48 0
- armdaq10, after replacement ofg PI1
calib[0]: 0x3299 calib[1]: 0x1d42 calib[2]: 0x0cd0 calib[3]: 0x0773 calib[4]: 0x8fea calib[5]: 0x1f47 d2: 0x004c471c d1: 0x0049c67c, old d2: 0x004c471c d2: 0x004c4b44 d1: 0x0049c734, old d2: 0x004c4b44 d2: 0x004c4ab4 d1: 0x0049c6bc, old d2: 0x004c4ab4 d2: 0x004c4b3c d1: 0x0049c684, old d2: 0x004c4b3c d2: 0x004c4a14 d1: 0x0049c77c, old d2: 0x004c4a14 d2: 0x004c4d04 d1: 0x0049c4dc, old d2: 0x004c4d04 d2: 0x004c4c9c d1: 0x0049c794, old d2: 0x004c4c9c d2: 0x004c4f14 d1: 0x0049c704, old d2: 0x004c4f14 d2: 0x004c4e3c d1: 0x0049c6a4, old d2: 0x004c4e3c d2: 0x004c4dcc d1: 0x0049c714, old d2: 0x004c4dcc calib[0]: 0x3b30 calib[1]: 0x2392 calib[2]: 0x0ecd calib[3]: 0x08a2 calib[4]: 0xab49 calib[5]: 0x1ea4 d2: 0x005990d4 d1: 0x004c2bec, old d2: 0x005990d4 d2: 0x005993fc d1: 0x004c2c24, old d2: 0x005993fc d2: 0x00599414 d1: 0x004c2e24, old d2: 0x00599414 d2: 0x00599404 d1: 0x004c2c1c, old d2: 0x00599404 d2: 0x005996ac d1: 0x004c2dc4, old d2: 0x005996ac d2: 0x00599764 d1: 0x004c2d5c, old d2: 0x00599764 d2: 0x0059968c d1: 0x004c2b4c, old d2: 0x0059968c d2: 0x005996c4 d1: 0x004c2b6c, old d2: 0x005996c4 d2: 0x0059984c d1: 0x004c2eb4, old d2: 0x0059984c d2: 0x0059987c d1: 0x004c2b4c, old d2: 0x0059987c 0 -0.69 30.88 0 1 -2.39 29.69 0 d1: 0x0049c5e4, old d2: 0x004c4dcc 0 -0.70 30.88 0 d1: 0x004c2cac, old d2: 0x0059987c 1 -2.37 29.69 0 d1: 0x0049c66c, old d2: 0x004c4dcc 0 -0.70 30.88 0 d1: 0x004c2ddc, old d2: 0x0059987c 1 -2.36 29.69 0 d1: 0x0049c564, old d2: 0x004c4dcc 0 -0.71 30.88 0 d1: 0x004c2d64, old d2: 0x0059987c 1 -2.36 29.69 0 d1: 0x0049c56c, old d2: 0x004c4dcc 0 -0.71 30.88 0 d1: 0x004c2d64, old d2: 0x0059987c 1 -2.36 29.69 0 d1: 0x0049c554, old d2: 0x004c4dcc 0 -0.71 30.88 0 d1: 0x004c2bbc, old d2: 0x0059987c 1 -2.39 29.69 0 d1: 0x0049c6dc, old d2: 0x004c4dcc 0 -0.70 30.88 0 d1: 0x004c2d24, old d2: 0x0059987c 1 -2.36 29.69 0 d1: 0x0049c534, old d2: 0x004c4dcc 0 -0.71 30.88 0 d1: 0x004c2d14, old d2: 0x0059987c 1 -2.36 29.69 0 d1: 0x0049c60c, old d2: 0x004c4dcc 0 -0.70 30.88 0 d1: 0x004c2c9c, old d2: 0x0059987c 1 -2.37 29.69 0 d1: 0x0049c68c, old d2: 0x004c4dcc 0 -0.70 30.88 0 d1: 0x004c2c24, old d2: 0x0059987c 1 -2.38 29.69 0 d1: 0x0049c624, old d2: 0x004c4dcc 0 -0.70 30.88 0
Supervisor
- note1: only members of github "MVM project" can see and access the supervisor repository
- install and build
mkdir -p mvm cd mvm git clone git@github.com:MechanicalVentilatorMilano/supervisor.git cd supervisor/src make AVR_TOOL_PATH=$HOME/arduino-1.8.12/hardware/tools/avr/bin/ # supervisor.elf and supervisor.hex are created
- configure RPi4:
- login as root
- edit /boot/config.txt
- add at the very end of the file: "enable_uart=1"
- beware that this changes the CPU clock speed, see https://www.raspberrypi.org/documentation/configuration/uart.md
- disable agetty login service to /dev/ttyS0:
systemctl mask serial-getty@ttyS0.service systemctl stop serial-getty@ttyS0.service
- to enable user access to /dev/ttyS0, create file /etc/udev/rules.d/01-ttyusb.rules
SUBSYSTEMS=="usb-serial", TAG+="uaccess"
- (to activate this file, run: "udevadm control --reload-rules" and "udevadm trigger --action=add")
- reboot
- observe that /dev/ttyS0 exists and has correct permissions:
root@raspberrypi:/home/pi# ls -l /dev/ttyS0 crw-rw---- 1 root dialout 4, 64 Jun 23 17:01 /dev/ttyS0 root@raspberrypi:/home/pi# ls -l /dev/ttyUSB0 crw-rw----+ 1 root dialout 188, 0 Jun 23 17:01 /dev/ttyUSB0
- upload to supervisor flash memory
$ make test AVR_TOOL2_PATH=$HOME/arduino-1.8.12/hardware/tools/avr/bin/
sudo ./rst.sh
sudo chmod 666 /dev/ttyS0
/home/pi/arduino-1.8.12/hardware/tools/avr/bin/avrdude -c arduino -P /dev/ttyS0 -b 57600 -p atmega328p -C avrdude.conf -v
avrdude: Version 6.3-20190619
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "avrdude.conf"
User configuration file is "/home/pi/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyS0
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x20
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x62
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x72
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x65
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x65
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x74
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x68
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x65
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x3a
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x20
avrdude done. Thank you.
make: *** [Makefile:112: test] Error 1
new control board (no version label)
142.90.102.28 $ ls -l /dev/ttyS0
crw-rw---- 1 root dialout 4, 64 Jun 30 22:41 /dev/ttyS0
142.90.102.28 $ make test AVR_TOOL2_PATH=$HOME/arduino-1.8.12/hardware/tools/avr/bin/
sudo ./rst.sh
sudo chmod 666 /dev/ttyS0
/home/pi/arduino-1.8.12/hardware/tools/avr/bin/avrdude -c arduino -P /dev/ttyS0 -b 57600 -p atmega328p -C avrdude.conf -v
avrdude: Version 6.3-20190619
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "avrdude.conf"
User configuration file is "/home/pi/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyS0
Using Programmer : arduino
Overriding Baud Rate : 57600
AVR Part : ATmega328P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PC2
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ ----- ----- ---------
eeprom 65 20 4 0 no 1024 4 0 3600 3600 0xff 0xff
flash 65 6 128 0 yes 32768 128 256 4500 4500 0xff 0xff
lfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
hfuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
efuse 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
lock 0 0 0 0 no 1 0 0 4500 4500 0x00 0x00
calibration 0 0 0 0 no 1 0 0 0 0 0x00 0x00
signature 0 0 0 0 no 3 0 0 0 0 0x00 0x00
Programmer Type : Arduino
Description : Arduino
Hardware Version: 2
Firmware Version: 1.16
Vtarget : 0.0 V
Varef : 0.0 V
Oscillator : Off
SCK period : 0.1 us
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0
avrdude: safemode: lfuse reads as 0
avrdude: safemode: hfuse reads as 0
avrdude: safemode: efuse reads as 0
avrdude: safemode: Fuses OK (E:00, H:00, L:00)
avrdude done. Thank you.
142.90.102.28 $
actually flash the supervisor firmware:
142.90.102.28 $ make flash AVR_TOOL2_PATH=$HOME/arduino-1.8.12/hardware/tools/avr/bin/
sudo ./rst.sh
sudo chmod 666 /dev/ttyS0
/home/pi/arduino-1.8.12/hardware/tools/avr/bin/avrdude -c arduino -P /dev/ttyS0 -b 57600 -p atmega328p -C avrdude.conf -U flash:w:supervisor.hex:i
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e950f (probably m328p)
avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: reading input file "supervisor.hex"
avrdude: writing flash (10958 bytes):
Writing | ################################################## | 100% 2.90s
avrdude: 10958 bytes of flash written
avrdude: verifying flash memory against supervisor.hex:
avrdude: load data flash data from input file supervisor.hex:
avrdude: input file supervisor.hex contains 10958 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 2.07s
avrdude: verifying ...
avrdude: 10958 bytes of flash verified
avrdude: safemode: Fuses OK (E:00, H:00, L:00)
avrdude done. Thank you.
sudo ./rst.sh
142.90.102.28 $
Firmware to GUI interface
Physical link
USB serial, 115200 bps, usb-serial lines RTS and DSR control reset and programming mode of esp32 processor.
The firmware running inside the ESP32 microcontroller communicates with the outside world using the U0TXD/U0RXD serial interface at 115200 bps, 8 bit, no flow control.
The adafruit HUZZAH32 ESP32 board integrates a serial-to-USB bridge chip and a micro-USB connector. The bridge chip implements a USB-serial communication protocal and provides a way to reset the ESP32 and to cause the ESP32 to enter the flash programming mode by operating the RTS and DSR lines.
Computer running the GUI code should connect to the ESP32 running the MVM firmware using a USB cable (micro-USB to USB-A). On Linux (i.e. RPi4 display unit) GUI should be configured to access /dev/ttyUSB0 with serial port settings listed above.
Set commands
| set command | version | type | arguments | |---|---|---|---| | "run" | all | int | <1: core_config.run=false, else =true | | "mode" | all | int | 0: BreathMode=M_BREATH_FORCED, else =M_BREATH_ASSISTED | | "rate" | all | float | core_config.respiratory_rate | | "ratio" | all | float | core_config.respiratory_ratio | | "assist_ptrigger | all | float | core_config.assist_pressure_delta_trigger | | "assist_flow_min" | all | float | flux_close | | "ptarget | all | float | target_pressure_auto | | "pressure_support" | all | float | target_ressure_assist | | "peep" | hw_rev3, hw_rev4 | float | pressure_forced_exhale_min, REMOVED IN V5 | | "pid_p" | all | float | .P | | "pid_i" | all | float | .I | | "pid_d" | all | float | .D | | "pid_p2" | all | float | .P2 | | "pid_i2" | all | float | .I2 | | "pid_d2" | all | float | .D2 | | "pause_inhale" | all | int | pause_inhale=arg, pause_timeout=500 | | "pause_lg" | all | int | !=0, pause_lg=true, else =false | | "pause_lg_time" | all | float->int | pause_lg_timer = arg*1000.0 | | "pause_lg_p" | all | float->int | pause_lg_p | | "pause_inhale" | v0.1 | int | pause_inhale=arg, pause_timeout=500 | | "pause_exhale" | all | int | pause_exhale=arg, pause_timeout=500 | | "pid_limit" | all | float | pid.limit | | "alarm_snooze" | all | int | see alarm snooze function | | "alarm" | hw_rev3, hw_rev4 | int | arg not used, fires ALARM_GUI_ALARM | | "alarm" | V5, v0.1 | int | set and clear GUI alarm, see alarm function | | "alarm_test" | v0.1 | int | arg!=0, SetAlarmTest(true), else ALARM_FLAG=0 (clear all alarms) | | "watchdog_reset" | all | int | arg not used, see watchdog function | | "console" | all | int | !0, __CONSOLE_MODE=true, else =false | | "timestamp" | all | int | !0, _ADDTimeStamp=true, else =false | | "pcv_trigger_enable" | !hw_rev3, hw_v4, V5, v0.1 | int | !0, pcv_trigger_enable=true, else =false | | "pcv_trigger" | !hw_rev3, hw_v4, V5, v0.1 | float | pcv_trigger | | "wdenable" | all | int | !0, __WDENABLE=true, else =false; enables and disabled the watchdog, see watchdog function | | "backup_enable" | all | int | !0, backup_enable=true, else =false | | "backup_min_rate" | hw_rev3, hw_rev4 | float | <1, backup_min_rate=1, else =arg, REMOVED IN V5 | | "backup_min_time" | only V5, v0.1 | float | <1, backup_min_rate=1, else =arg | | "stats_clear" | hw_rev3, hw_rev4 | none | ResetStatsBegin() | | "stats_clear" | V5, v0.1 | none | does nothing | | "flush_pipe" | V5, v0.1 | float | <1, FlushPipes(false,1), else FlushPipes(true,arg) | | "leak_compensation" | v0.1 | float | leak_compensaton | | "epc" | v0.1 | float | if <1, enable_pressure_compensaton=false, else =true | | "apnea_rate" | v0.1 | float | apnea_rate | | "apnea_ratio | v0.1 | float | apnea_ratio | | "apnea_ptarget" | v0.1 | float | apnea_ptarget | | "venturi_coefficient_0..4" | v0.1 | float | MVM->VenturiSetCoefficient(0..4, arg) |
Get commands
Get commands respond with "valore="+data, where data is shown in the following table.
- hw_rev3, hw_rev4: unknown commands produce no response
- V5: unknown commands return "valore=ERROR:Invalid Command Argument"
| get command | version | returns | unit | source | |---|---|---|---|---| | "pinput" | hw_v4 | Pinput | ? | | | "pressure" | all | pressure[0].last-pressure; V5: Ploop | ? | PS_0 | | "ppressure" | V5, v0.1 | PPatient | ? | PS_1 | | "flow" | all | gasflux[0].last_flux; V5: FlowIn | ? | FLOW1 | | "o2" | hw_rev3 | last_O2=21.7 | %pct | hardwired 21.7 | | "o2" | hw_rev4, V5, v0.1 | last_O2 | ? | i2c adc_channel 0 | | "bpm" | all | last_bpm | ? | | | "backup" | all | 0, not implemented | - | | | "backup" | v0.1 | backup_apnea | bool | | | "tidal" | all | tidal_volume_c.TidalVolume*VOL_COMP; V5: TidalVolume | ? | | | "peep" | all | last_peep | ? | averaged_PPatient | | "temperature" | all | temperature; V5, v0.1: GasTemperature | ? | FLOW1 temperature | | "power_mode" | all | "1" if batteryPowered, else "0" | bool | ReadSupervisor(0x52) | | "battery" | all | currentBatteryCharge | ? | ReadSupervisor(0x51) | | "version" | all | _FIRMWARE_VERSION_ | string | | | "version" | hw_rev3 | "HW_V3_2020_04_15_00" | string | | | "version" | hw_rev4 | "HW_V4_2020_04_20_00" | string | | | "version" | V5 | "NI_MVM-HW_V3_2020_04_17_00" | string | FwVersion.h | | "version" | v0.1 | "NI_MVMCPP-HW_V4_2020_05_01_00" | string | FwVersion.h | | "alarm" | all | ALARM_FLAG, see alarm function | uint32_t | | | "warning" | all | 0; V5: WARNING_FLAG, always 0. not implemented | - | - | | "run" | all | "1" if core_config.run, else "0" | bool | | | "mode" | all | "1" if core_config.BreathMode == M_BREATH_ASSISTED, else "0" | bool | | | "rate" | all | core_config.respiratory_rate | ? | | | "ratio" | all | core_config.respiratory_ratio | ? | | | "assist_ptrigger" | all | core_config.assist_pressure_delta_trigger | ? | | | "assist_flow_min" | all | core_config.flux_close | ? | | | "ptarget" | all | core_config.target_pressure_auto | ? | | | "pressure_support" | all | core_config.target_pressure_assist | ? | | | "backup_enable" | all | 1 if core_config.backup_enable, else 0 | bool | | | "backup_min_rate" | hw_rev3, V5, v0.1 | core_config.backup_min_rate | ? | | | "backup_min_time" | hw_rev4 | core_config.backup_min_time | ? | | | "pause_lg" | all | core_config.pause_lg | ? | | | "pause_lg_time" | all | core_config.pause_lg_timer/1000.0 | ? | | | "pause_lg_p" | all | core_config.pause_lg_p | ? | | | "leak_compensation" | v0.1 | core_config.leak_compensation | ? | | | "apnea_rate" | v0.1 | apnea_rate | ? | | | "apnea_ratio" | v0.1 | apnea_ratio | ? | | | "apnea_ptarget" | v0.1 | apnea_ptarget | ? | | | "pin" | v0.1 | Pin | float | ReadSupervisor(0x50) | | "btemp" | v0.1 | BoardTemperature | float | ReadSupervisor(0x56) | | "salarm" | v0.1 | SupervisorAlarms | uint16_t | ReadSupervisor(0x57) | | "all" | all | see "get all" | list of values | | | "calib" | all | see "get calib" | list of values | | | "calibv" | hw_rev3, hw_rev4 | see "get calibv" | | | "calibv" | V5, v0.1 | not implemented | - | | | "calib_o2" | hw_v4 | see "get calib_o2" | | | "calib_o2" | V5, v0.1 | "OK", calls CalibrateOxygenSensor() | - | | | "stats" | hw_rev3, hw_rev4 | see "get stats" | | | | "stats" | V5, v0.1 | not implemented | - | | | "ads" | hw_v4 | see "get ads" | | | | "pcv_trigger_enable" | hw_v4 | 1 if core_config.pcv_trigger_enable, else 0 | bool | | | "pcv_trigger" | hw_v4 | core_config.pcv_trigger | ? | | | "get_fp" | V5, v0.1 | FlowIn, VenturiP | ? | FLOW1, PS_2 | | "venturi_scan" | V5, v0.1 | "OK", calls DOVenturiMeterScan() | - | | | "valve_scan" | v0.1 | "OK", calls DOValveScan() | - | | | "leakage_test" | v0.1 | "OK", calls LEAKAGETest() | - | |
get all
hw_v3:
if (strPatam == "all") {
Serial.println("valore=" + String(pressure[1].last_pressure) + "," + String(tidal_volume_c.FLUX) + "," + String(last_O2) + "," + String(last_bpm)
+ "," + String(tidal_volume_c.TidalVolume * VOL_COMP) + "," + String(last_peep)
+ "," + String(temperature) + "," + String(batteryPowered ? 1 : 0) + "," + String(currentBatteryCharge)
+ "," + String(currentP_Peak)
+ "," + String(currentTvIsnp * VOL_COMP)
+ "," + String(currentTvEsp * VOL_COMP)
+ "," + String(currentVM));
}
hw_v4:
if (strPatam == "all") {
Serial.println("valore=" + String(pressure[1].last_pressure) + "," + String(tidal_volume_c.FLUX) + "," + String(last_O2) + "," + String(last_bpm)
+ "," + String(tidal_volume_c.TidalVolume * VOL_COMP) + "," + String(last_peep)
+ "," + String(temperature) + "," + String(batteryPowered ? 1 : 0) + "," + String(currentBatteryCharge)
+ "," + String(currentP_Peak)
+ "," + String(currentTvIsnp * VOL_COMP)
+ "," + String(currentTvEsp * VOL_COMP)
+ "," + String(currentTvIsnp * VOL_COMP * last_bpm/1000.0));
}
"V5", "v0.1":
/*
0 patient pressure
1 flux
2 o2
3 respiratory rate
4 real time volume
5 peep
6 gas temperature
7 power status
8 battery status
9 plateau pressure
10 inspired volume
11 expired volume
12 Minute Volume
*/
if (strPatam == "all") {
return "valore=" + String(sys_s->pPatient)
+ "," + String(sys_s->Flux)
+ "," + String(sys_s->last_O2)
+ "," + String(sys_s->last_bpm)
+ "," + String(sys_s->TidalVolume)
+ "," + String(sys_s->last_peep)
+ "," + String(sys_s->GasTemperature)
+ "," + String(sys_s->batteryPowered ? 1 : 0)
+ "," + String(sys_s->currentBatteryCharge)
+ "," + String(sys_s->currentP_Peak)
+ "," + String(sys_s->currentTvIsnp*1000.0)
+ "," + String(sys_s->currentTvEsp * 1000.0)
+ "," + String(sys_s->currentVM);
get calib
hw_rev3, hw_rev4:
Serial.print("Valore=");
for (int j = 0; j < N_PRESSURE_SENSORS; j++) {
i2c_MuxSelect(pressure_sensor_i2c_mux[j]);
float mean = 0;
PRES_SENS_CT[j].ZERO = 0;
for (int q = 0; q < 100; q++) {
read_pressure_sensor(j);
mean += pressure[j].last_pressure;
}
PRES_SENS_CT[j].ZERO = mean / 100;
Serial.print(String(PRES_SENS_CT[j].ZERO) + ",");
}
Serial.println(" ");
V5, v0.1:
float zeros[4];
int count=4;
((MVMCore*)core)->ZeroSensors(zeros,&count);
String outval ="valore=";
for (int i = 0; i < count; i++)
{
if (i != count - 1)
outval += String(zeros[i]) + ",";
else
outval += String(zeros[i]);
}
return outval;
get calibv
hw_rev3, hw_rev4:
if (fabs(tidal_volume_c.ExpVolumeVenturi) > 0)
tidal_volume_c.AutoZero = fabs(tidal_volume_c.InspVolumeVenturi) / fabs(tidal_volume_c.ExpVolumeVenturi);
Serial.println("valore=" + String(tidal_volume_c.InspVolumeVenturi) + "," + String(tidal_volume_c.ExpVolumeVenturi) + "," + String(tidal_volume_c.AutoZero));
get calib_o2
hw_rev4:
float o2_Temp = 0;
o2_Temp=ADS_V[0];
o2_Temp = o2_Temp* oxygen_q;
oxygen_m = -(o2_Temp - 21);
Serial.println("valore=" + String(oxygen_m));
get ads
hw_rev4:
float V1, V2, V3, V4;
uint8_t MUXBACKUP = LAST_MUX;
/* V1 = (V1/V2)*2.5;
V3 = (V1/V2)*2.5;
V4 = (V1/V2)*2.5;
*/
ADS_V[1] = ADS_V[1] < 1 ? 1:ADS_V[1];
Serial.println("Oxygen: " + String(ADS_V[0]) + " REF: " + String(ADS_V[1]) + " 12v: " + String(ADS_V[2]/ADS_V[1]*2.5*5) + " 5v: " + String(ADS_V[3]/ADS_V[1]*2.5*2));
get stats
hw_rev3, hw_rev4:
if (__stat_param.mean_cnt > 0) {
float overshoot_avg = __stat_param.overshoot_avg / __stat_param.mean_cnt;
float overshoot_length_avg = __stat_param.overshoot_length_avg / __stat_param.mean_cnt;
float final_error_avg = __stat_param.final_error_avg / __stat_param.mean_cnt;
float t1050_avg = __stat_param.t1050_avg / __stat_param.mean_cnt;
float t1090_avg = __stat_param.t1090_avg / __stat_param.mean_cnt;
float tpeak_avg = __stat_param.tpeak_avg / __stat_param.mean_cnt;
float t9010_avg = __stat_param.t9010_avg / __stat_param.mean_cnt;
float t9050_avg = __stat_param.t9050_avg / __stat_param.mean_cnt;
float peep_avg = __stat_param.peep_avg / __stat_param.mean_cnt;
float t10_avg = __stat_param.t10_avg / __stat_param.mean_cnt;
float time_to_peak_avg = __stat_param.time_to_peak_avg / __stat_param.mean_cnt;
float flux_peak_avg = __stat_param.flux_peak_avg / __stat_param.mean_cnt;
float flux_t1090_avg = __stat_param.flux_t1090_avg / __stat_param.mean_cnt;
float flux_t9010_avg = __stat_param.flux_t9010_avg / __stat_param.mean_cnt;
Serial.println("valore=overshoot_avg:" + String(overshoot_avg)
+ ",overshoot_length_avg:" + String(overshoot_length_avg)
+ ",final_error:" + String(final_error_avg)
+ ",t1050_avg:" + String(t1050_avg)
+ ",t1090_avg:" + String(t1090_avg)
+ ",tpeak_avg:" + String(tpeak_avg)
+ ",t9010_avg:" + String(t9010_avg)
+ ",t9050_avg:" + String(t9050_avg)
+ ",peep_avg:" + String(peep_avg)
+ ",t10_avg:" + String(t10_avg)
+ ",time_to_peak_avg:" + String(time_to_peak_avg)
+ ",flux_peak_avg:" + String(flux_peak_avg)
+ ",flux_t1090_avg:" + String(flux_t1090_avg)
+ ",flux_t9010_avg:" + String(flux_t9010_avg));
}
else {
Serial.println("valore=no_data");
}
console mode
Console mode is controlled by __CONSOLE_MODE, enabled by command "set console 1", disabled by common "set console 0"
When console mode is enabled, the watchdog function is turned off.
When console mode is enabled, command are processed normally, but periodiclally the following information is sent on the serial link:
hw_rev3:
String ts = __ADDTimeStamp ? String(millis()) + "," : "";
DBG_print(1, ts + String(gasflux[0].last_flux) + "," + String(pressure[0].last_pressure) + "," + String(pressure[1].last_pressure) + "," + String(PIDMonitor * 100 / 4096) + "," + String(PIDMonitor2) + "," + String(valve2_status) + "," + String(VenturiFlux) + "," + String(tidal_volume_c.FLUX) + "," + String(tidal_volume_c.TidalVolume * 0.02) + "," + String(dgb_delta));
hw_rev4:
String ts = __ADDTimeStamp ? String(millis()) + "," : "";
DBG_print(1, ts + String(gasflux[0].last_flux) + "," + String(pressure[0].last_pressure) + "," + String(pressure[1].last_pressure) + "," + String(PIDMonitor * 100 / 4096) + "," + String(PIDMonitor2) + "," + String(valve2_status) + "," + String(VenturiFlux) + "," + String(tidal_volume_c.FLUX) + "," + String(tidal_volume_c.TidalVolume * 0.02) + "," + String(dgb_delta));
V5:
float pid_slow, pid_fast; float InputValveSetPoint; float OutputValveSetPoint; MVM_HAL.GetInputValvePID(&pid_slow, &pid_fast); InputValveSetPoint = MVM_HAL.GetInputValve(); OutputValveSetPoint = MVM_HAL.GetOutputValve() * 100; String ts = CMC.core_config.__ADDTimeStamp ? String((uint32_t)MVM_HAL.GetMillis()) + "," : ""; /* MVM_HAL.WriteUART0(ts+ String(sys_s.FlowIn) + "," + String(sys_s.pLoop) + "," + String(sys_s.pPatient) + "," + String(pid_fast) + "," + String(pid_slow) + "," + String(OutputValveSetPoint) + "," + String(sys_s.VenturiFlux) + "," + String(sys_s.Flux) + "," + String(sys_s.TidalVolume) + "," + String(sys_s.PPatient_delta2 * 10) ); */ MVM_HAL.WriteUART0( String(sys_s.pLoop) + "," + String(sys_s.pPatient) + "," + String(pid_fast) + "," + String(pid_slow) );
v0.1:
void MVMCore::MVMDebugPrintLogger()
{
float pid_slow, pid_fast;
float InputValveSetPoint;
float OutputValveSetPoint;
MVM_HAL.GetInputValvePID(&pid_slow, &pid_fast);
InputValveSetPoint = MVM_HAL.GetInputValve();
OutputValveSetPoint = MVM_HAL.GetOutputValve() * 100;
String ts = CMC.core_config.__ADDTimeStamp ? String((uint32_t)MVM_HAL.GetMillis()) + "," : "";
MVM_HAL.WriteUART0(ts+
String(sys_s.FlowIn) + "," +
String(sys_s.pLoop) + "," +
String(sys_s.pPatient) + "," +
String(pid_fast) + "," +
String(pid_slow) + "," +
String(OutputValveSetPoint) + "," +
String(sys_s.VenturiFlux) + "," +
String(sys_s.Flux) + "," +
String(sys_s.TidalVolume) + "," +
String(sys_s.PPatient_delta2 * 10)
);
/*MVM_HAL.WriteUART0(
String(sys_s.pLoop) + "," +
String(sys_s.pPatient) + "," +
String(pid_fast) + "," +
String(pid_slow)
);*/
}
get alarm
returns uint32_t ALARM_FLAG, see alarm bits in the next section: (hw_v3, hw_v4, V5)
alarms
"V5" ALARM_FLAG logic:
"get alarm" returns sys__s->ALARM_FLAG sys_s->ALARM_FLAG bit ERROR_WDOG_PI cleared by command "watchdog_reset", also calls Alarms->ResetWatchdog() AlarmClass::Tick() copies alarm->ALARM_FLAG_FILTERED to _sys_c->ALARM_FLAG alarm->ALARM_FLAG_FILTERED is alarm->ALARM_FLAG without ALARM_FLAG_SNOOZE bits alarm->ALARM_FLAG is set be TriggerAlarm() alarm->ALARM_FLAG bit __ERROR_ALARM_PI is changed by SetAlarmGUI AlarmClass::Tick() called by MVMCode.Tick() if alarm_enable.
"V5" logic of "alarm_enable" (MVMCore data member)
set to false: MVMCore::Init() - FIXME - cannot find who calls it set to true: MVMCore::Tick() if last_alarm_CT > 5000 explanation: alarms are off startup, enabled after 5 seconds of running.
"V5" ALARM_FLAG_SNOOZE logic only in Alarms.cpp
in AlarmClass::Tick(): clear ALARM_FLAG_SNOOZE if ALARM_FLAG_SNOOZE_millis > 120000 in ResetAlarm(): ALARM_FLAG_SNOOZE = ALARM_FLAG, reset ALARM_FLAG_SNOOZE_millis ResetAlarm() called by "set alarm_snooze !29"
Alarms bits are set from TriggerAlarm(enum t_ALARM):
List t_ALARM values: (updated to v0.1)
PRESSURE_DROP_INHALE, // not used hw_v3, hw_v4, V5 UNABLE_TO_READ_SENSOR_PRESSURE, // loop() read_pressure_sensor(0,1) != 0 // "V5" HAL.cpp !drv_Ploop.asyncMeasure() || !drv_PPatient.asyncMeasure() UNABLE_TO_READ_SENSOR_FLUX, // loop() MeasureFlux() != 0 || MeasureFlux_SFM3019() != 0 // "V5" HAL.cpp !drv_FlowIn.doMeasure() UNABLE_TO_READ_SENSOR_VENTURI, // loop() read_pressure_sensor(2) != 0 // "V5" HAL.cpp !drv_PVenturi.asyncMeasure() ALARM_COMPLETE_OCCLUSION, // CheckAlarmConditions() - commented out // "V5" TransitionInhaleExhale_Event() ALARM_PARTIAL_OCCLUSION, // CheckAlarmConditions() - commented out // "V5" TransitionInhaleExhale_Event() ALARM_PRESSURE_INSIDE_TOO_HIGH, // CheckAlarmCondition() pressure[0].last_pressure > 50 // "V5" CheckStaticAlarms() pPatient > 50 || pLoop > 65 ALARM_PRESSURE_INSIDE_TOO_LOW, // CheckAlarmCondition() pressure[0].last_pressure < 0.5 * core_config.target_pressure // "V5" TransitionInhaleExhale_Event() pLoop < 0.5 current_pressure_setpoint ALARM_LEAKAGE, // CheckAlarmConditions() pressure[1].last_pressure < 0.8 * core_config.target_pressure // "V5" TransitionInhgaleExhale_Event() pPatient < 0.8 * current_pressure_setpoit BATTERY_LOW, // CheckAlarmConditions() if currentBatteryCharge < 20 // "V5" (currentBatteryCharge < 20) && batteryPowered ALARM_PRESSURE_INPUT_TOO_LOW, // not used // "V5" HAL.cpp (InputValveValue > 0) && (Pin < MIN_PIN) (MIN_PIN=3000) ALARM_PRESSURE_INPUT_TOO_HIGH, // not used // "V5" HAL.cpp Pin > MAX_PIN (MAX_PIN=4500) ALARM_GUI_ALARM, // command "set alarm" // "V5" SetAlarmGUI(bool), cleared by "set alarm 0" and "alarm_snooze 29", set by "set alarm 1" ALARM_GUI_WDOG, // loop() millis() > watchdog_time + 5000 // "V5" CheckStaticAlarms() wdog_timer > 6000 ALARM_OVER_UNDER_VOLTAGE, // "V5" HAL.cpp (adc_channel==2 VoltageProbe12V < 10 || > 15) || (adc_channel==3 VoltageProbe5V < 4.7 || > 5.3) ALARM_SUPERVISOR, // "V5" HAL.cpp SuperVisorAlarms != 0 ALARM_OVERTEMPERATURE, // "V5" HAL.cpp BoardTemperature > 75 ALARM_APNEA, // "V5" state machine "dt / 1000.0 > core_config->backup_min_rate" ALARM_NO_VENTURI_CONNECTED, // "v0.1" (TidalVolumeExt.LastVenturiVolume < 0.03) && (TidalVolumeExt.LastSensirionVolume > 0.15) ALARM_VENTURI_INVERTED, // "v0.1" (TidalVolumeExt.LastVenturiVolume < -0.05) && (TidalVolumeExt.LastSensirionVolume > 0.05) UNPREDICTABLE_CODE_EXECUTION // onTimerCoreTask() // "V5" SMexecute()
Alarm bits: (updated to v0.1)
#define __ERROR_INPUT_PRESSURE_LOW 0 // ALARM_PRESSURE_INPUT_TOO_LOW #define __ERROR_INPUT_PRESSURE_HIGH 1 // ALARM_PRESSURE_INPUT_TOO_HIGH #define __ERROR_INSIDE_PRESSURE_LOW 2 // ALARM_PRESSURE_INSIDE_TOO_LOW #define __ERROR_INSIDE_PRESSURE_HIGH 3 // ALARM_PRESSURE_INSIDE_TOO_HIGH #define __ERROR_BATTERY_LOW 4 // BATTERY_LOW #define __ERROR_LEAKAGE 5 // PRESSURE_DROP_INHALE || ALARM_LEAKAGE #define __ERROR_FULL_OCCLUSION 6 // ALARM_COMPLETE_OCCLUSION #define __ERROR_PARTIAL_OCCLUSION 7 // ALARM_PARTIAL_OCCLUSION #define __ERROR_APNEA 22 // "V5" ALARM_APNEA #define __ERROR_VENTURI_INVERTED 23 // "v0.1" ALARM_VENTURI_INVERTED #define __ERROR_VENTURI_NOT_CONNECTED 24 // "v0.1" ALARM_VENTURI_NOT_CONNECTED #define __ERROR_ALARM_TEST 28 // "v0.1" set by "set alarm_test 1", cleared by "set alarm_test 0" (resets all alarms) #define __ERROR_ALARM_PI 29 // ALARM_GUI_ALARM #define __ERROR_WDOG_PI 30 // ALARM_GUI_WDOG #define __ERROR_SYSTEM_FALIURE 31 // UNABLE_TO_READ_SENSOR_PRESSURE || UNABLE_TO_READ_SENSOR_FLUX || UNABLE_TO_READ_SENSOR_VENTURI || UNPREDICTABLE_CODE_EXECUTION || ALARM_SUPERVISOR || ALARM_OVERTEMPERATURE
bit ERROR_ALARM_PI:
- set by ALARM_GUI_ALARM from command "set alarm"
- cleared by ResetAlarm()
- cleared by command "set wdenable"
bit ERROR_WDOG_PI:
- hw_v3, hw_v4: set by ALARM_GUI_WDOG from loop() if millis() > watchdog_time + 5000
- "V5": set by ALARM_GUI_WDOG from CheckStaticAlarms() if wdog_enable && wdog_timer > 6000
- "V5": wdog_enable=false in Init(), =true in EnableWatchDog() called command "wdenable", 0=disable watchdog, !0=enable watchdog
- cleared by command "set watchdog_reset"
- watchdog_time is set in setup() and by command "set watchdog_reset"
alarm actions:
* if ALARM_FLAG contains any alarms: * AlarmSound=true and Sound() drives the buzzer. * isInAlarm=true and AlarmActions(): * blinks the alarm LED with period 250 ms, via HAL->SetAlarmLed() * calls HAL->SetAlarmRele(true), this drives GPIO_RELEALLARM (hw_rev4 A12)
watchdog
esp32 firmware implements a watchdog timer to check that the GUI is running.
- the watchdog is off at startup
- command "set wdenable 1" enables the watchdog and starts the timer
- command "set watchdog_reset" resets the watchdog timer
- if timer is not reset within 5 sec (hw_rev3, hw_rev4) or 6 sec ("V5"), ALARM_WDOG_PI is fired and bit ERROR_WDOG_PI is set in ALARM_FLAG
- if ALARM_FLAG is non-zero, alarm actions are initialed (see previous section)
Display Unit
SD image MvM_raspPi4_16gb_new.7z (14-Apr-2020)
-rw-r--r--@ 1 8ss staff 5161636360 Apr 16 09:52 MvM_raspPi4_16gb_new.7z -rwxr-xr-x 1 8ss staff 15931539456 Apr 14 06:02 MvM_raspPi4_16gb_new.img 8s-macbook-pro:NOBACKUP 8ss$ shasum -a 256 MvM_raspPi4_16gb_new.* 91987742cbf2c810afa74a47455a21de5b75b85c4fa134c10f48a30afae64194 MvM_raspPi4_16gb_new.7z bc5ed0efa279b027da4965132c91f494363ea98a297a649a062f346760d5de2e MvM_raspPi4_16gb_new.img
On power up:
- boots Raspbian 10 Buster
- starts X11 (in the alt-shift-f7 console)
- starts python3 gui (lightdm -> lxsession -> /home/pi/gui.sh -> /home/pi/work/MVMSoftware/gui/gui/mvm_gui.py)
- if no ESP32 connected, displays an "abort, retry, ignore" dialog
- if ESP32 connected, displays nothing (hung? wrong ESP32 firmware?)
- starts TeamViewer (from systemd)
- user pi is logged in the alt-shift-f1 console (no password) (via systemctl autologin agetty?)
Autologin:
- lightdm: /etc/lightdm/lightdm.conf has this "autologin-user=pi"
- lxsession: /home/pi/.config/lxsession/LXDE-pi/autostart has this: "@/home/pi/gui.sh"
- /etc/systemd/system/autologin@.service has this: "ExecStart=-/sbin/agetty --autologin pi --noclear %I $TERM"
Partitions mounted:
- / (mmcblk p7)
- /boot (mmcblk p6)
Running processes:
- ModemManager (this is a mistake, it will fight over access to /dev/USB0)
- TeamViewer (is this secure, what's the access password?)
- no sshd
- no NetworkManager
Users:
- root, password blank (login disabled)
- pi, password raspberry (default password)
Network:
- eth0 RJ45 - DHCP is enabled, gets an IP address
- wlan0 (radio is on, per rfkill) - configured to connect to 3 wifi networks (2 of them maybe disabled)
- bluetooth (radio is on, per rfkill) - looks to be on, not clear if paired with anything
SD Partition table:
Disk /dev/sda: 29.3 GiB, 31486640128 bytes, 61497344 sectors Disk model: STORAGE DEVICE Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x000d0750 Device Boot Start End Sectors Size Id Type /dev/sda1 8192 5015625 5007434 2.4G c W95 FAT32 (LBA) /dev/sda2 5015626 31116287 26100662 12.5G 5 Extended /dev/sda5 5021696 5087229 65534 32M 83 Linux /dev/sda6 5087232 5611517 524286 256M c W95 FAT32 (LBA) /dev/sda7 5611520 31116287 25504768 12.2G 83 Linux root@raspberrypi:/mnt/tmp/home/pi#
SD partition contents:
- sda1: looks like RPi recovery partition (what is this?)
- sda2: extended partition (why?)
- sda5: (what is this?)
- sda6: boot partition, cmdline.txt has "console=serial0,115200 console=tty1 root=/dev/mmcblk0p7 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles"
- sda7: "/" including /home/pi.
SD Image TRIUMF-KO
analyze boot time
systemd-analyze plot > plot.svg
speed up boot time
as root:
systemctl disable bluetooth systemctl disable wpa_supplicant systemctl disable nfs-client.target systemctl disable dphys-swapfile.service systemctl disable exim4 systemctl disable triggerhappy systemctl disable bluetooth #echo iface wlan0 inet manual > /etc/network/interfaces.d/disable-wifi echo -e 'blacklist brcmfmac'\\n'blacklist brcmutil' > /etc/modprobe.d/disable-wifi.conf #echo -e 'blacklist btbcm'\\n'blacklist bluetooth' > /etc/modprobe.d/disable-bluetooth.conf systemctl disable hciuart echo -e 'noarp'\\n'noipv6'\\n'ipv4only' >> /etc/dhcpcd.conf
- move dhcp out of the boot sequence:
- systemctl disable dhcpcd
- add "systemctl restart dhcpcd" in /etc/rc.local to read:
#!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. modprobe i2c-dev systemctl restart dhcpcd # Print the IP address _IP=$(hostname -I) || true if [ "$_IP" ]; then printf "My IP address is %s\n" "$_IP" fi exit 0
reduce size of SD image
apt-get remove "xemacs*" apt autoremove apt-get clean /bin/rm /var/swap
start MVM GUI on boot
Startup sequence: systemd -> Xserver -> lightdm -> autologin -> ~pi/.xsession -> mvm_gui.perl
- autologin user pi, as root:
- apt-get install lightdm xterm x11-xserver-utils
- edit /etc/lightdm/lightdm.conf change line: autologin-user=pi
- groupadd -r autologin
- gpasswd -a pi autologin
- create ~pi/.xsession with this contents:, as user "pi":
#!/bin/bash #xterm xset s off # don't activate screensaver xset -dpms # disable DPMS (Energy Star) features. xset s noblank # don't blank the video device xset q echo Starting mvm_gui! ./gui/gui/mvm_gui.py skipTests | grep -v "ESP32Serial-DEBUG: get" echo mvm_gui finished!
- to restart GUI, attach USB keyboard and press: ALT-SYSRQ-K (SYSRQ is "print screen")
start MVM GUI through VNC
startup sequence:
- systemd -> /etc/rc.local -> ~pi/startserver.sh -> xvncserver -> Xsession -> ~pi/mvmsession.sh -> mvm_gui
- systemd -> Xserver -> lightdm -> autologin -> .xsession -> startvnc.sh -> xvncviewer
to run mvm_gui through VNC:
- as root:
- apt-get install tigervnc"*" xfonts-100dpi xfonts-75dpi xfonts-scalable
- as user pi:
- create ~pi/mvmsession.sh
#!/bin/bash #xterm xset s off # don't activate screensaver xset -dpms # disable DPMS (Energy Star) features. xset s noblank # don't blank the video device xset q echo Starting mvm_gui! python3 -u $HOME/gui/gui/mvm_gui.py skipTests > $HOME/mvm_gui.log 2>&1 echo mvm_gui finished!
- create ~pi/.xsession
#!/bin/bash #xterm xset s off # don't activate screensaver xset -dpms # disable DPMS (Energy Star) features. xset s noblank # don't blank the video device xset q echo Starting vnc viewer! ./startvnc.sh echo vnc viewer finished!
- create startserver.sh
#!/bin/bash export LD_PRELOAD=/lib/arm-linux-gnueabihf/libgcc_s.so.1 exec tigervncserver -geometry 800x480 -fg --verbose -- ~/mvmsession.sh
- create startvnc.sh
#!/bin/bash exec xtigervncviewer -Shared -SecurityTypes VncAuth,TLSVnc -passwd /home/pi/.vnc/passwd -geometry 800x480 localhost:1
- chmod a+x .xsession mvmsession.sh startvnc.sh startserver.sh
- setup the vncpassword, run vncpasswd, enter password 123456, say yes to create voew-only password, enter password 123456
- as root, add to the beginning of /etc/rc.local, before restart of dhcpd
su - pi -c /home/pi/startserver.sh &
additional adjustments
- create ~pi/.bash_aliases
# .bash_aliases export PS1="`hostname -I`$ " # end
prepare image for VEXOS
- !!! IMPORTANT: remove all private SSH keys from ~pi/.ssh and from ~root/.ssh !!!
- on MVM machine:
dd if=/dev/mmcblk0 | gzip -1v | nc -v ladd00.triumf.ca 9999
- on ladd00:
cd /daq/daqstore/olchansk/mvm/proto-c nc -v -l 9999 > VEXOS16GB-20200617.img.gz < /dev/null sha256sum VEXOS16GB-20200617.img.gz