Supported Hardware

CAMAC

Even though CAMAC is not much used any more, when simple test need to be done and old equipment are still available and functional, it can provide a quick solution to an otherwise heavy or cumbersome DAQ system. Recent USB/CAMAC interfaces can be attractive as they provide fast CAMAC cycle (data collection through preloaded CAMAC list) and will shelf permanently the old ISA or PCI interfaces that newer hardware can't support any more anyway.

Over the last 20 years, the hardware used for physics experiment did evolved from CAMAC or FastBus to VME and more recently to Network devices gathering data from custom FPGAs acquisition boards. Obviously not all models for a given category are present, but similarity between their operations may provide you a good starting point for a particular driver development.

FastBus

This hardware was accessed through VME. Modules are obsolete.

VME

VME is still widely used and various type of VME interfaces can be found such as: VME processors, USB device, Optical link to PCIe card, Network based interfaces. SIS3100 PCIe interfaces, or VME processors for more demanding VME requirements are the more common interfaces supported by Midas.

Worth to be mentioned that commercial VME modules manufacturer are using the VME crate housing for power distribution and provide access to their device using propitiatory lin such as optical to improve the data transfer rate. This configuration requires a dedicated PCIe interface sitting in a PC. The VME access remains available in any case.

Serial communication

RS232, USB communication are sometime necessary. Network interface devices to these type of serial interfaces are getting popular by providing a common programming layer independent of the hardware communication. Similarly, software layer such as ser2net will bridge serial devices connected to a PC to a remote network application for communication.

Software layers

Midas includes for the so called "slow control hardware" a multi-layer concept based on the Object-Oriented programming. It is composed of 3 layers (3 directories)

• Class/ describes the main functionality of the device
  • High Voltage devices provides similar functionality across the different brand, ex:class/hv.c will implement the user/Midas(ODB) interface and call the appropriate function for that device through the device layer.
• Device/ describes the functionality implementation for that particular device.
  • Depending on the device hardware, the requested function may involve a specific access sequence. The ex:device/lrs4420.c will format that transaction and call the appropriate communication function implemented into by this device
• Bus/ describes the access specific to the device.
  • Serial, parallel, GPIB, Ethernet or proprietary communication to the device. The ex:bus/rs232.h will package the request into the appropriate form to be delivered to the device.

Note: not all the device drivers implement the triple layer (Class, Device, Bus) as some include the hardware calls directly from the device layer.