/Elog ODB tree
Links
Creating the /Elog tree
The /Elog tree is created automatically the first time the ELOG button on the mhttpd Status Page is pressed.
Purpose
The ODB /Elog tree contains the information necessary to run the Electronic Logbook (ELOG), which is implemented through Mhttpd. By default, the built-in (or internal) elog is created. If an external elog is required, it must be installed (see External Elog)and will replace the built-in elog. No setup is needed for the built-in elog.
Location of ELOG Files
By default, built-in elog files are written into the directory path given by the ODB key /Logger/Data dir.
This location can be changed by use of the ODB Key /Logger/Elog dir. This key is optional and doesn't appear by default in the //Logger tree, but can be created by the user if desired. If this key is present, the location of the Internal Electronic logbook (Elog) files is reassigned to the defined path.
If using an external Elog, the location of the files are given by the ODB key Logbook Dir
Examples
Example 1 - The /elog tree
When initially created (see above) the /Experiment tree contains the following keys:
[local:midas:S]/>ls -lrt /elog
Key name Type #Val Size Last Opn Mode Value
---------------------------------------------------------------------------
Elog DIR
Display run number BOOL 1 4 17m 0 RWD y
Allow delete BOOL 1 4 17m 0 RWD n
Buttons STRING 3 32 17m 0 RWD
[0] 8h
[1] 24h
[2] 7d
Example 2 - Types and Systems
Creating a New message (by clicking on the New button on the Elog Page results in the full /Elog tree being created, i.e.
[local:test:S]/>ls -lrt /elog
Key name Type #Val Size Last Opn Mode Value
---------------------------------------------------------------------------
Elog DIR
Display run number BOOL 1 4 13m 0 RWD y
Allow delete BOOL 1 4 13m 0 RWD n
Buttons STRING 3 32 13m 0 RWD
[0] 8h
[1] 24h
[2] 7d
Types STRING 20 32 9m 0 RWD
[0] Routine
[1] Shift summary
[2] Minor error
[3] Severe error
[4] Fix
[5] Question
[6] Info
[7] Modification
[8] Reply
[9] Alarm
[10] Test
[11] Other
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
Systems STRING 20 32 9m 0 RWD
[0] General
[1] DAQ
[2] Detector
[3] Electronics
[4] Target
[5] Beamline
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
Host name STRING 1 256 9m 0 RWD dasdevpc2.triumf.ca
Example 3 - Sending email
The user can optionally add keys so that email is sent to users when messages with particular Type or System are created, e.g.
Email Severe error STRING 1 32 57s 0 RWD midas@triumf.ca Email DAQ STRING 1 32 28s 0 RWD abe@triumf.ca, cal@triumf.ca SMTP host STRING 1 32 53m 0 RWD localhost
Example 4 - External elog
If running an External elog, the following keys must be added by the user:
Url STRING 1 64 >99d 0 RWD http://isdaq60.triumf.ca:8089/BNMRonline/ Logbook Dir STRING 1 64 >99d 0 RWD /data1/elog/logbook/
Keys in /Elog tree
The keys in the ODB /Elog tree are described in the following sections. Except where noted, the keys are used by either built-in or external elog.
Display Run number
- Type: BOOL
- Default: y
This key in the /Elog tree enables or disables the automatic display of the run number in the elog entry. This key is set to 'y' when the tree is created.
Allow delete
- Type: BOOL
- Default: n
This key in the /Elog tree enables or disables allowing the user to delete an elog entry. This key is set to 'n' when the tree is created.
Buttons
- Type: STRING ARRAY
- Default: 8h 24h 7d
This key in the /Elog tree causes buttons to be created on the Elog Page to permit the user to easily recall Elog messages for up to four possible time spans. Example 1 shows three time spans; all messages in the last 8 hours, 24 hours, or 7 days can be recalled by pressing the appropriate button.
Types
- Type: STRING ARRAY
- Default: See Example 2
This key in the /Elog tree causes a drop-down list of Message Types to be created on the Elog Page containing the list of message types defined by the Types array. The user selects one of these message types when creating a message. The message types can be customized by editing the Types key.
The default Types are shown in Example 2.
Systems
- Type: STRING ARRAY
- Default: See Example 2
This key in the /Elog tree causes a drop-down list of Systems to be created on the Elog Page containing the list of systems defined by the Systems array. The user selects one of these systems when creating a message. The systems can be customized by editing the Systems key.
The default Systems are shown in Example 2.
Host name
- Type: STRING
- Default: e.g. myhost.triumf.ca
This key in the /Elog tree contains the name of the host machine. It is created and filled automatically when the elog tree is created.
SMTP host
- Type: STRING
- Default: localhost
This optional key in the /Elog tree contains the name of the SMTP host machine for sending out email. It must be created and filled by the user if any email is to be sent out apprising user(s) of new Elog messages
(see key Email <type/system>).
Email <type/system>
- Type: STRING
- Default: email address(es) of user(s)
These optional keys in the /Elog tree are created if email is to be sent out when a new ELOG message for a particular Type or System is created. The Type or System name must appear in the Types or Systems array. For email to be sent out, the key SMTP host must also be defined.
For example, if Type "Severe error" is defined, then if ODB key Email Severe Error is created containing suitable email address(es) (see example 3) , if a new message is created of Type "Severe error", then email containing the new elog entry will be sent automatically to the listed email address(es).
Similarly, if System "DAQ" is defined, then if ODB key Email DAQ is created as in example 3) , email containing the new elog entry will be sent automatically if the new message has selected System "DAQ".
Url
- Type: STRING
- Default:
This optional key in the /Elog tree contains the URL of the host machine that is running the External elog. It is created and filled by the user (see example 4). If using an External elog, this key must be present; the elog information will be redirected to the external elog.
If using an Built-in Elog, this key must NOT be present.
Logbook Dir
- Type: STRING
- Default:
This optional key in the /Elog tree contains the path of a directory to contain the elog files when running the External elog. It is created and filled by the user (see example 4). If using an External elog, this key is required.
If using an Built-in Elog, this key is not present.