I think the issue may be the version of MIDAS I'm using.  Mine is current as of February 4, 2020.  

But since then there have been changes to the sequencer code, specifically parts that handle indexing.

I'll try this out with an updated version of MIDAS and report back if there are still any issues after updating.

> I created some keys in my ODB to try to match yours.
> The ODBSET commands you wrote are all working fine (of course with different results), except only for the "/Detectors/Det*/Settings/Charge/Bias (V)*" which I will have to 
> look into.
> In any case the error message I'm getting is "could not match ay key" and not the one you are reporting.
> 
> Now I'm a bit puzzled:
> Are you sure your ODB contains those keys?
> Are you testing the ODBSET inside a more complex sequencer or on its own?
> 
> Maybe I can try to reproduce it using your ODB setup.
> Could you send an ODB dump of the "/Detectors" folder using the "save" command of odbedit ("cd /Detectors" and then "save detector.odb")?
> 
> Best,
> 
> Marco
> 
> 
> > The following all fail with "Cannot find ODB key "<key>""
> > 
> > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)[*]" 0
> > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)[0-9]" 0
> > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)[1]" 0
> > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)*" 0
> > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)" 0
> > 
> > 
> > > Hi,
> > > I guess the issue is in the "[?]" part of the command, the indexing is handled differently from the odb path and does not 
> > > support "?".
> > > Are you trying to set only the first 9 channels?
> > > Could you try with "[*]" or "[0-9]" instead?
> > > 
> > > Marco
> > > 
> > > > I'm interested in using the matching feature for ODBSET explained on 
> > > > https://midas.triumf.ca/MidasWiki/index.php/Sequencer for settings that are in an 
> > > > array, like:
> > > > 
> > > > COMMENT "Ground the detectors"
> > > > ODBSET "/Detectors/Det*/Settings/Charge/Bias (V)[?]" 0
> > > > 
> > > > Currently I get an error when I try to run this script.  Is this expected?  Would it 
> > > > be possible to implement matching for array values?
> > > > 
> > > > Thanks!