Dear All,

I have a problem when testing the V792N 16 CH QDC with the V1718 VME-USB 
Bridge on Scientific Linux 5.1 i386 (kernel 2.6.18-53.1.21.e15).

The problem is that the V792N does not response normally after a few minutes 
of continuous polling and readout of data. It seems like the V792N is hanged 
and a hardware reset of the VME system is required to bring it working again. 
If I do not poll for DREADY first and directly read the Output Buffer 
continuously, the system can work properly.

I have worked on this problem many days but I cannot find any clues to solve 
it. I have tried to use the CAENVMEDemo program (with some modifications) to 
do the same thing (polling and readout) and it works fine. CAEN technical 
support also doesn't know why the VME system is hanged. I think it might be a 
problem of MIDAS itself. I have tried with MIDAS revision 4132 and the trunk 
version, but the problem is still there. Is there any parameter in MIDAS 
(buffer size etc?) which may cause this problem? I have attached my frontend 
code and drivers for your reference.

Thank you for your kind attention.

Best Regards,
Jimmy

/*********************************************************************

  Name:         v792n.c
  Created by:   Jimmy Ngai

  Contents:     V792N 16ch. QDC

  Based on v792.c by Pierre-Andre Amaudruz
                
  $Id: $
*********************************************************************/
#include <stdio.h>
#include <string.h>
#include <signal.h>
#if defined(OS_LINUX)
#include <unistd.h>
#endif
#include "v792n.h"

WORD v792n_Read16(MVME_INTERFACE *mvme, DWORD base, int offset)
{
  int cmode;
  WORD data;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  data = mvme_read_value(mvme, base+offset);
  mvme_set_dmode(mvme, cmode);
  return data;
}

void v792n_Write16(MVME_INTERFACE *mvme, DWORD base, int offset, WORD value)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+offset, value);
  mvme_set_dmode(mvme, cmode);
}

DWORD v792n_Read32(MVME_INTERFACE *mvme, DWORD base, int offset)
{
  int cmode;
  DWORD data;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D32);
  data = mvme_read_value(mvme, base+offset);
  mvme_set_dmode(mvme, cmode);
  return data;
}

void v792n_Write32(MVME_INTERFACE *mvme, DWORD base, int offset, DWORD value)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D32);
  mvme_write_value(mvme, base+offset, value);
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
int v792n_DataReady(MVME_INTERFACE *mvme, DWORD base)
{
  int data_ready, cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  data_ready = mvme_read_value(mvme, base+V792N_CSR1_RO) & 0x1;
  mvme_set_dmode(mvme, cmode);
  return data_ready;
}

/*****************************************************************/
int v792n_isEvtReady(MVME_INTERFACE *mvme, DWORD base)
{
  int csr;
  csr = v792n_CSR1Read(mvme, base);
  return (csr & 0x100);
}

/*****************************************************************/
int v792n_isBusy(MVME_INTERFACE *mvme, DWORD base)
{
  int status, busy, timeout, cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  timeout = 1000;
  do {
    status = mvme_read_value(mvme, base+V792N_CSR1_RO);
    busy = status & 0x4;
    timeout--;
  } while (busy || timeout);
  mvme_set_dmode(mvme, cmode);
  return (busy != 0 ? 1 : 0);
}

/*****************************************************************/
/*
Read single event, return event length (number of entries)
Uses single vme access! (1us/D32)
*/
int v792n_EventRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int *nentry)
{
#define USE_BLT_READ_2

#ifdef USE_SINGLE_READ
  DWORD hdata;
  int   cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D32);

  *nentry = 0;
  if (v792n_DataReady(mvme, base)) {
    do {
      hdata = mvme_read_value(mvme, base);
    } while (!(hdata & 0x02000000)); // skip up to the header

    pdest[*nentry] = hdata;
    *nentry += 1;
    do {
      pdest[*nentry] = mvme_read_value(mvme, base);
      *nentry += 1;
    } while (!(pdest[*nentry-1] & 0x04000000)); // copy until the trailer

    nentry--;
  }

  mvme_set_dmode(mvme, cmode);
#endif // USE_SINGLE_READ

#ifdef USE_BLT_READ_1
  DWORD hdata, data[V792N_MAX_CHANNELS+2];
  int   cam, cmode, cnt, i;

  mvme_get_am(mvme, &cam);
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D32);

  *nentry = 0;
  if (v792n_DataReady(mvme, base)) {
    do {
      hdata = mvme_read_value(mvme, base);
    } while (!(hdata & 0x02000000)); // skip up to the header

    mvme_set_am(mvme, MVME_AM_A32_NB);
    mvme->blt_mode = MVME_BLT_BLT32;
    cnt = (hdata >> 8) & 0x3F;

    mvme_read(mvme, data, base, (cnt+1)*4);
    pdest[0] = hdata;
    for (i=1;i<=cnt+1;i++)
      pdest[i] = data[i-1];

    *nentry = cnt + 2;
  }

  mvme_set_am(mvme, cam);
  mvme_set_dmode(mvme, cmode);
#endif // USE_BLT_READ_1

#ifdef USE_BLT_READ_2
  DWORD hdata;
  int   cam, cmode, cnt;

  mvme_get_am(mvme, &cam);
  mvme_get_dmode(mvme, &cmode);

  *nentry = 0;
//  if (v792n_DataReady(mvme, base)) {
    mvme_set_am(mvme, MVME_AM_A32_NB);
    mvme->blt_mode = MVME_BLT_BLT32;
    mvme_read(mvme, pdest, base, (V792N_MAX_CHANNELS+2)*4);
    cnt = (pdest[0] >> 8) & 0x3F;
    *nentry = cnt + 2;
//  }

  mvme_set_am(mvme, cam);
  mvme_set_dmode(mvme, cmode);
#endif //USE_BLT_READ_2

  return *nentry;
}

/*****************************************************************/
/*
Read nentry of data from the data buffer. Will use the DMA engine
if size is larger than 127 bytes.
*/
int v792n_DataRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int *nentry)
{
  int  cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D32);
//  *nentry = 128;
  if (v792n_DataReady(mvme, base)) {
    mvme_read(mvme, pdest, base, *nentry*4);
  }
  mvme_set_dmode(mvme, cmode);
  return *nentry;
}

/*****************************************************************/
void v792n_DataClear(MVME_INTERFACE *mvme, DWORD base)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_BIT_SET2_RW, 0x4);
  mvme_write_value(mvme, base+V792N_BIT_CLEAR2_WO, 0x4);
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_EvtCntRead(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt)
{
  int cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  *evtcnt  = mvme_read_value(mvme, base+V792N_EVT_CNT_L_RO);
  *evtcnt += (mvme_read_value(mvme, base+V792N_EVT_CNT_H_RO) << 16);
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_EvtCntReset(MVME_INTERFACE *mvme, DWORD base)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_EVT_CNT_RST_WO, 1);
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_IntSet(MVME_INTERFACE *mvme, DWORD base, int level, int vector)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_INT_VECTOR_WO, (vector & 0xFF));
  mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, (level & 0x7));
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_IntEnable(MVME_INTERFACE *mvme, DWORD base, int level)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, (level & 0x1F));
  /* Use the trigger buffer for int enable/disable
  mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, (level & 0x7));
  */
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_IntDisable(MVME_INTERFACE *mvme, DWORD base)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, 0);
  /* Use the trigger buffer for int enable/disable
     Setting a level 0 reboot the VMIC !
  mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, 0);
  */
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_EvtTriggerSet(MVME_INTERFACE *mvme, DWORD base, int count)
{
  int cmode;

  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, (count & 0x1F));
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_SingleShotReset(MVME_INTERFACE *mvme, DWORD base)
{
  int cmode;
  mvme_get_dmode(mvme, &cmode);
  mvme_set_dmode(mvme, MVME_DMODE_D16);
  mvme_write_value(mvme, base+V792N_SINGLE_RST_WO, 1);
  mvme_set_dmode(mvme, cmode);
}

/*****************************************************************/
void v792n_SoftReset(MVME_INTERFACE *mvme, DWORD base)
{