/********************************************************************\
Name: frontend.c
Created by: Jimmy Ngai
Date: May 9, 2010
Contents: Experiment specific readout code (user part) of
Midas frontend.
Supported VME modules:
CAEN V1718 VME-USB Bridge
CAEN V792N 16 CH QDC
$Id: $
\********************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include "midas.h"
#include "mcstd.h"
#include "mvmestd.h"
#include "experim.h"
#include "vme/v792n.h"
/* make frontend functions callable from the C framework */
#ifdef __cplusplus
extern "C" {
#endif
/*-- Globals -------------------------------------------------------*/
/* The frontend name (client name) as seen by other MIDAS clients */
char *frontend_name = "Frontend";
/* The frontend file name, don't change it */
char *frontend_file_name = __FILE__;
/* frontend_loop is called periodically if this variable is TRUE */
BOOL frontend_call_loop = FALSE;
/* a frontend status page is displayed with this frequency in ms */
INT display_period = 3000;
/* maximum event size produced by this frontend */
INT max_event_size = 10000;
/* maximum event size for fragmented events (EQ_FRAGMENTED) */
INT max_event_size_frag = 5 * 1024 * 1024;
/* buffer size to hold events */
INT event_buffer_size = 10 * 10000;
/* number of channels */
#define N_ADC 16
/* VME hardware */
MVME_INTERFACE *myvme;
/* VME base address */
DWORD V1718_BASE = 0x12000000;
DWORD V792N_BASE = 0x32100000;
/*-- Function declarations -----------------------------------------*/
INT frontend_init();
INT frontend_exit();
INT begin_of_run(INT run_number, char *error);
INT end_of_run(INT run_number, char *error);
INT pause_run(INT run_number, char *error);
INT resume_run(INT run_number, char *error);
INT frontend_loop();
INT read_trigger_event(char *pevent, INT off);
/*-- Equipment list ------------------------------------------------*/
#undef USE_INT
EQUIPMENT equipment[] = {
{"Trigger", /* equipment name */
{1, 0, /* event ID, trigger mask */
"SYSTEM", /* event buffer */
#ifdef USE_INT
EQ_INTERRUPT, /* equipment type */
#else
EQ_POLLED, /* equipment type */
#endif
LAM_SOURCE(CRATE, LAM_STATION(SLOT_ADC)), /* event source */
"MIDAS", /* format */
TRUE, /* enabled */
RO_RUNNING | /* read only when running */
RO_ODB, /* and update ODB */
500, /* poll for 500ms */
0, /* stop run after this event limit */
0, /* number of sub events */
0, /* don't log history */
"", "", "",},
read_trigger_event, /* readout routine */
},
{""}
};
#ifdef __cplusplus
}
#endif
/********************************************************************\
Callback routines for system transitions
These routines are called whenever a system transition like start/
stop of a run occurs. The routines are called on the following
occations:
frontend_init: When the frontend program is started. This routine
should initialize the hardware.
frontend_exit: When the frontend program is shut down. Can be used
to releas any locked resources like memory, commu-
nications ports etc.
begin_of_run: When a new run is started. Clear scalers, open
rungates, etc.
end_of_run: Called on a request to stop a run. Can send
end-of-run event and close run gates.
pause_run: When a run is paused. Should disable trigger events.
resume_run: When a run is resumed. Should enable trigger events.
\********************************************************************/
INT init_vme_modules()
{
/* default settings */
v792n_SoftReset(myvme, V792N_BASE);
v792n_Setup(myvme, V792N_BASE, 2);
// v792n_Status(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Frontend Init -------------------------------------------------*/
INT frontend_init()
{
INT status;
/* open VME interface */
status = mvme_open(&myvme, 0);
/* set am to A32 non-privileged Data */
mvme_set_am(myvme, MVME_AM_A32_ND);
/* initialize all VME modules */
init_vme_modules();
v792n_OfflineSet(myvme, V792N_BASE);
v792n_DataClear(myvme, V792N_BASE);
/* print message and return FE_ERR_HW if frontend should not be started */
if (status != MVME_SUCCESS) {
cm_msg(MERROR, "frontend_init", "VME interface could not be opened.");
return FE_ERR_HW;
}
return SUCCESS;
}
/*-- Frontend Exit -------------------------------------------------*/
INT frontend_exit()
{
/* close VME interface */
mvme_close(myvme);
return SUCCESS;
}
/*-- Begin of Run --------------------------------------------------*/
INT begin_of_run(INT run_number, char *error)
{
/* Initialize all VME modules */
// init_vme_modules();
v792n_DataClear(myvme, V792N_BASE);
v792n_OnlineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- End of Run ----------------------------------------------------*/
INT end_of_run(INT run_number, char *error)
{
v792n_OfflineSet(myvme, V792N_BASE);
v792n_DataClear(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Pause Run -----------------------------------------------------*/
INT pause_run(INT run_number, char *error)
{
v792n_OfflineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Resuem Run ----------------------------------------------------*/
INT resume_run(INT run_number, char *error)
{
v792n_OnlineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Frontend Loop -------------------------------------------------*/
INT frontend_loop()
{
/* if frontend_call_loop is true, this routine gets called when
the frontend is idle or once between every event */
return SUCCESS;
}
/*------------------------------------------------------------------*/
/********************************************************************\
Readout routines for different events
\********************************************************************/
/*-- Trigger event routines ----------------------------------------*/
INT poll_event(INT source, INT count, BOOL test)
/* Polling routine for events. Returns TRUE if event
is available. If test equals TRUE, don't return. The test
flag is used to time the polling */
{
INT i;
DWORD lam = 0;
for (i = 0; i < count; i++) {
lam = v792n_DataReady(myvme, V792N_BASE);
if (lam)
if (!test)
return lam;
}
return 0;
}
/*-- Interrupt configuration ---------------------------------------*/
INT interrupt_configure(INT cmd, INT source, POINTER_T adr)
{
switch (cmd) {
case CMD_INTERRUPT_ENABLE:
break;
case CMD_INTERRUPT_DISABLE:
break;
case CMD_INTERRUPT_ATTACH:
break;
case CMD_INTERRUPT_DETACH:
break;
}
return SUCCESS;
}
/*-- Event readout -------------------------------------------------*/
INT read_v792n(INT base, const char *bk_name, char *pevent, INT n_chn)
{
INT i;
INT nentry = 0, counter;
DWORD data[V792N_MAX_CHANNELS+2];
WORD *pdata;
/* event counter */
// v792n_EvtCntRead(myvme, base, &counter);
/* read event */
v792n_EventRead(myvme, base, data, &nentry);
/* clear ADC */
// v792n_DataClear(myvme, base);
/* create ADC bank */
bk_create(pevent, bk_name, TID_WORD, &pdata);
... 29 more lines ...
|
/*********************************************************************
Name: v792n.h
Created by: Jimmy Ngai
Contents: V792N 16ch. QDC include
Based on v792.h by Pierre-Andre Amaudruz
$Id: $
*********************************************************************/
#ifndef V792N_INCLUDE_H
#define V792N_INCLUDE_H
#include <stdio.h>
#include <string.h>
#include "mvmestd.h"
#ifdef __cplusplus
extern "C" {
#endif
#define V792N_MAX_CHANNELS (DWORD) 16
#define V792N_REG_BASE (DWORD) (0x1000)
#define V792N_FIRM_REV (DWORD) (0x1000)
#define V792N_GEO_ADDR_RW (DWORD) (0x1002)
#define V792N_MCST_CBLT_RW (DWORD) (0x1004)
#define V792N_BIT_SET1_RW (DWORD) (0x1006)
#define V792N_BIT_CLEAR1_WO (DWORD) (0x1008)
#define V792N_SOFT_RESET (DWORD) (0x1<<7)
#define V792N_INT_LEVEL_WO (DWORD) (0x100A)
#define V792N_INT_VECTOR_WO (DWORD) (0x100C)
#define V792N_CSR1_RO (DWORD) (0x100E)
#define V792N_CR1_RW (DWORD) (0x1010)
#define V792N_ADER_H_RW (DWORD) (0x1012)
#define V792N_ADER_L_RW (DWORD) (0x1014)
#define V792N_SINGLE_RST_WO (DWORD) (0x1016)
#define V792N_MCST_CBLT_CTRL_RW (DWORD) (0x101A)
#define V792N_EVTRIG_REG_RW (DWORD) (0x1020)
#define V792N_CSR2_RO (DWORD) (0x1022)
#define V792N_EVT_CNT_L_RO (DWORD) (0x1024)
#define V792N_EVT_CNT_H_RO (DWORD) (0x1026)
#define V792N_INCR_EVT_WO (DWORD) (0x1028)
#define V792N_INCR_OFFSET_WO (DWORD) (0x102A)
#define V792N_LD_TEST_RW (DWORD) (0x102C)
#define V792N_DELAY_CLEAR_RW (DWORD) (0x102E)
#define V792N_FCLR_WIN_RW (DWORD) (0x102E)
#define V792N_BIT_SET2_RW (DWORD) (0x1032)
#define V792N_BIT_CLEAR2_WO (DWORD) (0x1034)
#define V792N_W_MEM_TEST_WO (DWORD) (0x1036)
#define V792N_MEM_TEST_WORD_H_WO (DWORD) (0x1038)
#define V792N_MEM_TEST_WORD_L_WO (DWORD) (0x103A)
#define V792N_CRATE_SEL_RW (DWORD) (0x103C)
#define V792N_TEST_EVENT_WO (DWORD) (0x103E)
#define V792N_EVT_CNT_RST_WO (DWORD) (0x1040)
#define V792N_IPED_RW (DWORD) (0x1060)
#define V792N_R_MEM_TEST_WO (DWORD) (0x1064)
#define V792N_SWCOMM_WO (DWORD) (0x1068)
#define V792N_SLIDECONST_RW (DWORD) (0x106A)
#define V792N_AAD_RO (DWORD) (0x1070)
#define V792N_BAD_RO (DWORD) (0x1072)
#define V792N_THRES_BASE (DWORD) (0x1080)
WORD v792n_Read16(MVME_INTERFACE *mvme, DWORD base, int offset);
void v792n_Write16(MVME_INTERFACE *mvme, DWORD base, int offset, WORD value);
DWORD v792n_Read32(MVME_INTERFACE *mvme, DWORD base, int offset);
void v792n_Write32(MVME_INTERFACE *mvme, DWORD base, int offset, DWORD value);
int v792n_DataReady(MVME_INTERFACE *mvme, DWORD base);
int v792n_isEvtReady(MVME_INTERFACE *mvme, DWORD base);
int v792n_isBusy(MVME_INTERFACE *mvme, DWORD base);
int v792n_EventRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int *nentry);
int v792n_DataRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int nentry);
void v792n_DataClear(MVME_INTERFACE *mvme, DWORD base);
void v792n_EvtCntRead(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt);
void v792n_EvtCntReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_IntSet(MVME_INTERFACE *mvme, DWORD base, int level, int vector);
void v792n_IntEnable(MVME_INTERFACE *mvme, DWORD base, int level);
void v792n_IntDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_EvtTriggerSet(MVME_INTERFACE *mvme, DWORD base, int count);
void v792n_SingleShotReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_SoftReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_Trigger(MVME_INTERFACE *mvme, DWORD base);
int v792n_ThresholdRead(MVME_INTERFACE *mvme, DWORD base, WORD *threshold);
int v792n_ThresholdWrite(MVME_INTERFACE *mvme, DWORD base, WORD *threshold);
int v792n_CSR1Read(MVME_INTERFACE *mvme, DWORD base);
int v792n_CSR2Read(MVME_INTERFACE *mvme, DWORD base);
int v792n_BitSet2Read(MVME_INTERFACE *mvme, DWORD base);
void v792n_BitSet2Set(MVME_INTERFACE *mvme, DWORD base, WORD pat);
void v792n_BitSet2Clear(MVME_INTERFACE *mvme, DWORD base, WORD pat);
WORD v792n_ControlRegister1Read(MVME_INTERFACE *mvme, DWORD base);
void v792n_ControlRegister1Write(MVME_INTERFACE *mvme, DWORD base, WORD pat);
void v792n_OnlineSet(MVME_INTERFACE *mvme, DWORD base);
void v792n_OfflineSet(MVME_INTERFACE *mvme, DWORD base);
void v792n_BlkEndEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_OverRangeEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_OverRangeDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_LowThEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_LowThDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_EmptyEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_CrateSet(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt);
void v792n_DelayClearSet(MVME_INTERFACE *mvme, DWORD base, int delay);
int v792n_Setup(MVME_INTERFACE *mvme, DWORD base, int mode);
void v792n_Status(MVME_INTERFACE *mvme, DWORD base);
int v792n_isPresent(MVME_INTERFACE *mvme, DWORD base);
enum v792n_DataType {
v792n_typeMeasurement=0,
v792n_typeHeader =2,
v792n_typeFooter =4,
v792n_typeFiller =6
};
typedef union {
DWORD raw;
struct v792n_Entry {
unsigned adc:12; // bit0 here
unsigned ov:1;
unsigned un:1;
unsigned _pad_1:3;
unsigned channel:4;
unsigned _pad_2:3;
unsigned type:3;
unsigned geo:5;
} data ;
struct v792n_Header {
unsigned _pad_1:8; // bit0 here
unsigned cnt:6;
unsigned _pad_2:2;
unsigned crate:8;
unsigned type:3;
unsigned geo:5;
} header;
struct v792n_Footer {
unsigned evtCnt:24; // bit0 here
unsigned type:3;
unsigned geo:5;
} footer;
} v792n_Data;
typedef union {
DWORD raw;
struct {
unsigned DataReady:1; // bit0 here
unsigned GlobalDataReady:1;
unsigned Busy:1;
unsigned GlobalBusy:1;
unsigned Amnesia:1;
unsigned Purge:1;
unsigned TermOn:1;
unsigned TermOff:1;
unsigned EventReady:1; //bit 8 here
};
} v792n_StatusRegister1;
typedef union {
DWORD raw;
struct {
unsigned _pad_1:1; // bit0 here
unsigned BufferEmpty:1;
unsigned BufferFull:1;
unsigned _pad_2:1;
unsigned PB:4;
//unsigned DSEL0:1;
//unsigned DSEL1:1;
//unsigned CSEL0:1;
//unsigned CSEL1:1;
};
} v792n_StatusRegister2;
typedef union {
DWORD raw;
struct {
unsigned _pad_1:2;
unsigned BlkEnd:1;
unsigned _pad_2:1;
unsigned ProgReset:1;
unsigned BErr:1;
unsigned Align64:1;
};
} v792n_ControlRegister1;
typedef union {
DWORD raw;
struct {
unsigned MemTest:1;
unsigned OffLine:1;
unsigned ClearData:1;
unsigned OverRange:1;
unsigned LowThresh:1;
unsigned _pad_1:1;//bit5
unsigned TestAcq:1;
unsigned SLDEnable:1;
unsigned StepTH:1;
unsigned _pad_2:2;//bits 9-10
unsigned AutoIncr:1;
unsigned EmptyProg:1;
unsigned SlideSubEnable:1;
unsigned AllTrg:1;
};
} v792n_BitSet2Register;
void v792n_printEntry(const v792n_Data* v);
#ifdef __cplusplus
}
#endif
#endif // V792N_INCLUDE_H
/* emacs
* Local Variables:
* mode:C
* mode:font-lock
* tab-width: 8
* c-basic-offset: 2
* End:
*/
|
/*********************************************************************
Name: v792n.c
Created by: Jimmy Ngai
Contents: V792N 16ch. QDC
Based on v792.c by Pierre-Andre Amaudruz
$Id: $
*********************************************************************/
#include <stdio.h>
#include <string.h>
#include <signal.h>
#if defined(OS_LINUX)
#include <unistd.h>
#endif
#include "v792n.h"
WORD v792n_Read16(MVME_INTERFACE *mvme, DWORD base, int offset)
{
int cmode;
WORD data;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
data = mvme_read_value(mvme, base+offset);
mvme_set_dmode(mvme, cmode);
return data;
}
void v792n_Write16(MVME_INTERFACE *mvme, DWORD base, int offset, WORD value)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+offset, value);
mvme_set_dmode(mvme, cmode);
}
DWORD v792n_Read32(MVME_INTERFACE *mvme, DWORD base, int offset)
{
int cmode;
DWORD data;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D32);
data = mvme_read_value(mvme, base+offset);
mvme_set_dmode(mvme, cmode);
return data;
}
void v792n_Write32(MVME_INTERFACE *mvme, DWORD base, int offset, DWORD value)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D32);
mvme_write_value(mvme, base+offset, value);
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
int v792n_DataReady(MVME_INTERFACE *mvme, DWORD base)
{
int data_ready, cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
data_ready = mvme_read_value(mvme, base+V792N_CSR1_RO) & 0x1;
mvme_set_dmode(mvme, cmode);
return data_ready;
}
/*****************************************************************/
int v792n_isEvtReady(MVME_INTERFACE *mvme, DWORD base)
{
int csr;
csr = v792n_CSR1Read(mvme, base);
return (csr & 0x100);
}
/*****************************************************************/
int v792n_isBusy(MVME_INTERFACE *mvme, DWORD base)
{
int status, busy, timeout, cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
timeout = 1000;
do {
status = mvme_read_value(mvme, base+V792N_CSR1_RO);
busy = status & 0x4;
timeout--;
} while (busy || timeout);
mvme_set_dmode(mvme, cmode);
return (busy != 0 ? 1 : 0);
}
/*****************************************************************/
/*
Read single event, return event length (number of entries)
*/
int v792n_EventRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int *nentry)
{
#define USE_BLT_READ_2
#ifdef USE_SINGLE_READ
DWORD hdata;
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D32);
*nentry = 0;
if (v792n_DataReady(mvme, base)) {
do {
hdata = mvme_read_value(mvme, base);
} while (!(hdata & 0x02000000)); // skip up to the header
pdest[*nentry] = hdata;
*nentry += 1;
do {
pdest[*nentry] = mvme_read_value(mvme, base);
*nentry += 1;
} while (!(pdest[*nentry-1] & 0x04000000)); // copy until the trailer
nentry--;
}
mvme_set_dmode(mvme, cmode);
#endif // USE_SINGLE_READ
#ifdef USE_BLT_READ_1
DWORD hdata, data[V792N_MAX_CHANNELS+2];
int cam, cmode, cblt, cnt, i;
mvme_get_am(mvme, &cam);
mvme_get_dmode(mvme, &cmode);
mvme_get_blt(mvme, &cblt);
mvme_set_dmode(mvme, MVME_DMODE_D32);
*nentry = 0;
if (v792n_DataReady(mvme, base)) {
do {
hdata = mvme_read_value(mvme, base);
} while (!(hdata & 0x02000000)); // skip up to the header
mvme_set_am(mvme, MVME_AM_A32_SB);
mvme_set_blt(mvme, MVME_BLT_BLT32);
cnt = (hdata >> 8) & 0x3F;
mvme_read(mvme, data, base, (cnt+1)*4);
pdest[0] = hdata;
for (i=1;i<=cnt+1;i++)
pdest[i] = data[i-1];
*nentry = cnt + 2;
}
mvme_set_am(mvme, cam);
mvme_set_dmode(mvme, cmode);
mvme_set_blt(mvme, cblt);
#endif // USE_BLT_READ_1
#ifdef USE_BLT_READ_2
int cam, cmode, cblt, cnt;
mvme_get_am(mvme, &cam);
mvme_get_dmode(mvme, &cmode);
mvme_get_blt(mvme, &cblt);
mvme_set_dmode(mvme, MVME_DMODE_D32);
*nentry = 0;
// if (v792n_DataReady(mvme, base)) {
mvme_set_am(mvme, MVME_AM_A32_SB);
mvme_set_blt(mvme, MVME_BLT_BLT32);
mvme_read(mvme, pdest, base, (V792N_MAX_CHANNELS+2)*4);
cnt = (pdest[0] >> 8) & 0x3F;
*nentry = cnt + 2;
// }
mvme_set_am(mvme, cam);
mvme_set_dmode(mvme, cmode);
mvme_set_blt(mvme, cblt);
#endif //USE_BLT_READ_2
return *nentry;
}
/*****************************************************************/
/*
Read nentry of data from the data buffer
*/
int v792n_DataRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int nentry)
{
int cmode, status;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D32);
// nentry = 128;
if (v792n_DataReady(mvme, base)) {
status = mvme_read(mvme, pdest, base, nentry*4);
}
mvme_set_dmode(mvme, cmode);
return status;
}
/*****************************************************************/
void v792n_DataClear(MVME_INTERFACE *mvme, DWORD base)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_BIT_SET2_RW, 0x4);
mvme_write_value(mvme, base+V792N_BIT_CLEAR2_WO, 0x4);
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_EvtCntRead(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
*evtcnt = mvme_read_value(mvme, base+V792N_EVT_CNT_L_RO);
*evtcnt += (mvme_read_value(mvme, base+V792N_EVT_CNT_H_RO) << 16);
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_EvtCntReset(MVME_INTERFACE *mvme, DWORD base)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_EVT_CNT_RST_WO, 1);
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_IntSet(MVME_INTERFACE *mvme, DWORD base, int level, int vector)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_INT_VECTOR_WO, (vector & 0xFF));
mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, (level & 0x7));
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_IntEnable(MVME_INTERFACE *mvme, DWORD base, int level)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, (level & 0x1F));
/* Use the trigger buffer for int enable/disable
mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, (level & 0x7));
*/
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_IntDisable(MVME_INTERFACE *mvme, DWORD base)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, 0);
/* Use the trigger buffer for int enable/disable
Setting a level 0 reboot the VMIC !
mvme_write_value(mvme, base+V792N_INT_LEVEL_WO, 0);
*/
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_EvtTriggerSet(MVME_INTERFACE *mvme, DWORD base, int count)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_EVTRIG_REG_RW, (count & 0x1F));
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
void v792n_SingleShotReset(MVME_INTERFACE *mvme, DWORD base)
{
int cmode;
mvme_get_dmode(mvme, &cmode);
mvme_set_dmode(mvme, MVME_DMODE_D16);
mvme_write_value(mvme, base+V792N_SINGLE_RST_WO, 1);
mvme_set_dmode(mvme, cmode);
}
/*****************************************************************/
... 409 more lines ...
|