|
|
|
Back
Midas
Rome
Roody
Rootana
|
| Midas DAQ System |
Not logged in |
 |
|
|
 10 May 2011, Jianglai Liu, Forum, simple example frontend for V1720
|
 10 May 2011, Stefan Ritt, Forum, simple example frontend for V1720
| |
10 May 2011, Pierre-Andre Amaudruz, Forum, simple example frontend for V1720
|
24 May 2011, Jianglai Liu, Forum, simple example frontend for V1720 
| |
18 May 2011, Jimmy Ngai, Forum, simple example frontend for V1720
| |
10 Aug 2012, Carl Blaksley, Forum, simple example frontend for V1720
| |
12 Aug 2012, Jimmy Ngai, Forum, simple example frontend for V1720
|
|
|
Message ID: 761
Entry time: 18 May 2011
In reply to: 758
Reply to this: 825
|
| Author: |
Jimmy Ngai |
| Topic: |
Forum |
| Subject: |
simple example frontend for V1720 |
|
|
| Jianglai Liu wrote: | Hi,
Who has a good example of a frontend program using CAEN V1718 VME-USB bridge and
V1720 FADC? I am trying to set up the DAQ for such a simple system.
I put together a frontend which talks to the VME. However it gets stuck at
"Calibrating" in initialize_equipment().
I'd appreciate some help!
Thanks,
Jianglai |
Hi Jianglai,
I don't have an exmaple of using V1718 with V1720, but I have been using V1718 with V792N for a long time.
You may find in the attachment an example frontend program and my drivers for V1718 and V792N written in MVMESTD format. They have to be linked with the CAENVMELib library and other essential MIDAS stuffs.
Regards,
Jimmy |
|
/********************************************************************\
Name: frontend.c
Created by: Jimmy Ngai
Date: May 9, 2010
Contents: Experiment specific readout code (user part) of
Midas frontend.
Supported VME modules:
CAEN V1718 VME-USB Bridge
CAEN V792N 16 CH QDC
$Id: $
\********************************************************************/
#include <stdio.h>
#include <stdlib.h>
#include "midas.h"
#include "mcstd.h"
#include "mvmestd.h"
#include "experim.h"
#include "vme/v792n.h"
/* make frontend functions callable from the C framework */
#ifdef __cplusplus
extern "C" {
#endif
/*-- Globals -------------------------------------------------------*/
/* The frontend name (client name) as seen by other MIDAS clients */
char *frontend_name = "Frontend";
/* The frontend file name, don't change it */
char *frontend_file_name = __FILE__;
/* frontend_loop is called periodically if this variable is TRUE */
BOOL frontend_call_loop = FALSE;
/* a frontend status page is displayed with this frequency in ms */
INT display_period = 3000;
/* maximum event size produced by this frontend */
INT max_event_size = 10000;
/* maximum event size for fragmented events (EQ_FRAGMENTED) */
INT max_event_size_frag = 5 * 1024 * 1024;
/* buffer size to hold events */
INT event_buffer_size = 10 * 10000;
/* number of channels */
#define N_ADC 16
/* VME hardware */
MVME_INTERFACE *myvme;
/* VME base address */
DWORD V1718_BASE = 0x12000000;
DWORD V792N_BASE = 0x32100000;
/*-- Function declarations -----------------------------------------*/
INT frontend_init();
INT frontend_exit();
INT begin_of_run(INT run_number, char *error);
INT end_of_run(INT run_number, char *error);
INT pause_run(INT run_number, char *error);
INT resume_run(INT run_number, char *error);
INT frontend_loop();
INT read_trigger_event(char *pevent, INT off);
/*-- Equipment list ------------------------------------------------*/
#undef USE_INT
EQUIPMENT equipment[] = {
{"Trigger", /* equipment name */
{1, 0, /* event ID, trigger mask */
"SYSTEM", /* event buffer */
#ifdef USE_INT
EQ_INTERRUPT, /* equipment type */
#else
EQ_POLLED, /* equipment type */
#endif
LAM_SOURCE(CRATE, LAM_STATION(SLOT_ADC)), /* event source */
"MIDAS", /* format */
TRUE, /* enabled */
RO_RUNNING | /* read only when running */
RO_ODB, /* and update ODB */
500, /* poll for 500ms */
0, /* stop run after this event limit */
0, /* number of sub events */
0, /* don't log history */
"", "", "",},
read_trigger_event, /* readout routine */
},
{""}
};
#ifdef __cplusplus
}
#endif
/********************************************************************\
Callback routines for system transitions
These routines are called whenever a system transition like start/
stop of a run occurs. The routines are called on the following
occations:
frontend_init: When the frontend program is started. This routine
should initialize the hardware.
frontend_exit: When the frontend program is shut down. Can be used
to releas any locked resources like memory, commu-
nications ports etc.
begin_of_run: When a new run is started. Clear scalers, open
rungates, etc.
end_of_run: Called on a request to stop a run. Can send
end-of-run event and close run gates.
pause_run: When a run is paused. Should disable trigger events.
resume_run: When a run is resumed. Should enable trigger events.
\********************************************************************/
INT init_vme_modules()
{
/* default settings */
v792n_SoftReset(myvme, V792N_BASE);
v792n_Setup(myvme, V792N_BASE, 2);
// v792n_Status(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Frontend Init -------------------------------------------------*/
INT frontend_init()
{
INT status;
/* open VME interface */
status = mvme_open(&myvme, 0);
/* set am to A32 non-privileged Data */
mvme_set_am(myvme, MVME_AM_A32_ND);
/* initialize all VME modules */
init_vme_modules();
v792n_OfflineSet(myvme, V792N_BASE);
v792n_DataClear(myvme, V792N_BASE);
/* print message and return FE_ERR_HW if frontend should not be started */
if (status != MVME_SUCCESS) {
cm_msg(MERROR, "frontend_init", "VME interface could not be opened.");
return FE_ERR_HW;
}
return SUCCESS;
}
/*-- Frontend Exit -------------------------------------------------*/
INT frontend_exit()
{
/* close VME interface */
mvme_close(myvme);
return SUCCESS;
}
/*-- Begin of Run --------------------------------------------------*/
INT begin_of_run(INT run_number, char *error)
{
/* Initialize all VME modules */
// init_vme_modules();
v792n_DataClear(myvme, V792N_BASE);
v792n_OnlineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- End of Run ----------------------------------------------------*/
INT end_of_run(INT run_number, char *error)
{
v792n_OfflineSet(myvme, V792N_BASE);
v792n_DataClear(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Pause Run -----------------------------------------------------*/
INT pause_run(INT run_number, char *error)
{
v792n_OfflineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Resuem Run ----------------------------------------------------*/
INT resume_run(INT run_number, char *error)
{
v792n_OnlineSet(myvme, V792N_BASE);
return SUCCESS;
}
/*-- Frontend Loop -------------------------------------------------*/
INT frontend_loop()
{
/* if frontend_call_loop is true, this routine gets called when
the frontend is idle or once between every event */
return SUCCESS;
}
/*------------------------------------------------------------------*/
/********************************************************************\
Readout routines for different events
\********************************************************************/
/*-- Trigger event routines ----------------------------------------*/
INT poll_event(INT source, INT count, BOOL test)
/* Polling routine for events. Returns TRUE if event
is available. If test equals TRUE, don't return. The test
flag is used to time the polling */
{
INT i;
DWORD lam = 0;
for (i = 0; i < count; i++) {
lam = v792n_DataReady(myvme, V792N_BASE);
if (lam)
if (!test)
return lam;
}
return 0;
}
/*-- Interrupt configuration ---------------------------------------*/
INT interrupt_configure(INT cmd, INT source, POINTER_T adr)
{
switch (cmd) {
case CMD_INTERRUPT_ENABLE:
break;
case CMD_INTERRUPT_DISABLE:
break;
case CMD_INTERRUPT_ATTACH:
break;
case CMD_INTERRUPT_DETACH:
break;
}
return SUCCESS;
}
/*-- Event readout -------------------------------------------------*/
INT read_v792n(INT base, const char *bk_name, char *pevent, INT n_chn)
{
INT i;
INT nentry = 0, counter;
DWORD data[V792N_MAX_CHANNELS+2];
WORD *pdata;
/* event counter */
// v792n_EvtCntRead(myvme, base, &counter);
/* read event */
v792n_EventRead(myvme, base, data, &nentry);
/* clear ADC */
// v792n_DataClear(myvme, base);
/* create ADC bank */
bk_create(pevent, bk_name, TID_WORD, &pdata);
... 29 more lines ...
|
|
/*********************************************************************
Name: v1718.h
Created by: Jimmy Ngai
Contents: V1718 VME-USB2.0 bridge include
$Id: $
*********************************************************************/
#ifndef V1718_INCLUDE_H
#define V1718_INCLUDE_H
#include <stdio.h>
#include <string.h>
#include "mvmestd.h"
#ifdef __cplusplus
extern "C" {
#endif
#define V1718_STATUS_RO (DWORD) (0x0000)
#define V1718_VME_CTRL_RW (DWORD) (0x0001)
#define V1718_FW_REV_RO (DWORD) (0x0002)
#define V1718_FW_DWNLD_RW (DWORD) (0x0003)
#define V1718_FL_ENA_RW (DWORD) (0x0004)
#define V1718_IRQ_STAT_RO (DWORD) (0x0005)
#define V1718_IN_REG_RW (DWORD) (0x0008)
#define V1718_OUT_REG_S_RW (DWORD) (0x000A)
#define V1718_IN_MUX_S_RW (DWORD) (0x000B)
#define V1718_OUT_MUX_S_RW (DWORD) (0x000C)
#define V1718_LED_POL_S_RW (DWORD) (0x000D)
#define V1718_OUT_REG_C_WO (DWORD) (0x0010)
#define V1718_IN_MUX_C_WO (DWORD) (0x0011)
#define V1718_OUT_MAX_C_WO (DWORD) (0x0012)
#define V1718_LED_POL_C_WO (DWORD) (0x0013)
#define V1718_PULSEA_0_RW (DWORD) (0x0016)
#define V1718_PULSEA_1_RW (DWORD) (0x0017)
#define V1718_PULSEB_0_RW (DWORD) (0x0019)
#define V1718_PULSEB_1_RW (DWORD) (0x001A)
#define V1718_SCALER0_RW (DWORD) (0x001C)
#define V1718_SCALER1_RO (DWORD) (0x001D)
#define V1718_DISP_ADL_RO (DWORD) (0x0020)
#define V1718_DISP_ADH_RO (DWORD) (0x0021)
#define V1718_DISP_DTL_RO (DWORD) (0x0022)
#define V1718_DISP_DTH_RO (DWORD) (0x0023)
#define V1718_DISP_PC1_RO (DWORD) (0x0024)
#define V1718_DISP_PC2_RO (DWORD) (0x0025)
#define V1718_LM_ADL_RW (DWORD) (0x0028)
#define V1718_LM_ADH_RW (DWORD) (0x0029)
#define V1718_LM_C_RW (DWORD) (0x002C)
WORD v1718_Read16(MVME_INTERFACE *mvme, DWORD base, int offset);
void v1718_Write16(MVME_INTERFACE *mvme, DWORD base, int offset, WORD value);
DWORD v1718_Read32(MVME_INTERFACE *mvme, DWORD base, int offset);
void v1718_Write32(MVME_INTERFACE *mvme, DWORD base, int offset, DWORD value);
void v1718_MultiRead(MVME_INTERFACE *mvme, DWORD *addrs, DWORD *value, int ncycle, int *am, int *dmode);
void v1718_MultiWrite(MVME_INTERFACE *mvme, DWORD *addrs, DWORD *value, int ncycle, int *am, int *dmode);
void v1718_MultiRead16(MVME_INTERFACE *mvme, DWORD *addrs, WORD *value, int ncycle);
void v1718_MultiWrite16(MVME_INTERFACE *mvme, DWORD *addrs, WORD *value, int ncycle);
void v1718_MultiRead32(MVME_INTERFACE *mvme, DWORD *addrs, DWORD *value, int ncycle);
void v1718_MultiWrite32(MVME_INTERFACE *mvme, DWORD *addrs, DWORD *value, int ncycle);
void v1718_PulserConfSet(MVME_INTERFACE *mvme, WORD pulser, DWORD period, DWORD width, WORD pulseNo);
void v1718_PulserStart(MVME_INTERFACE *mvme, WORD pulser);
void v1718_PulserStop(MVME_INTERFACE *mvme, WORD pulser);
enum v1718_PulserSelect {
v1718_pulserA=0x0,
v1718_pulserB=0x1,
};
#ifdef __cplusplus
}
#endif
#endif // V1718_INCLUDE_H
/* emacs
* Local Variables:
* mode:C
* mode:font-lock
* tab-width: 8
* c-basic-offset: 2
* End:
*/
|
|
|
/*********************************************************************
Name: v792n.h
Created by: Jimmy Ngai
Contents: V792N 16ch. QDC include
Based on v792.h by Pierre-Andre Amaudruz
$Id: $
*********************************************************************/
#ifndef V792N_INCLUDE_H
#define V792N_INCLUDE_H
#include <stdio.h>
#include <string.h>
#include "mvmestd.h"
#ifdef __cplusplus
extern "C" {
#endif
#define V792N_MAX_CHANNELS (DWORD) 16
#define V792N_REG_BASE (DWORD) (0x1000)
#define V792N_FIRM_REV (DWORD) (0x1000)
#define V792N_GEO_ADDR_RW (DWORD) (0x1002)
#define V792N_MCST_CBLT_RW (DWORD) (0x1004)
#define V792N_BIT_SET1_RW (DWORD) (0x1006)
#define V792N_BIT_CLEAR1_WO (DWORD) (0x1008)
#define V792N_SOFT_RESET (DWORD) (0x1<<7)
#define V792N_INT_LEVEL_WO (DWORD) (0x100A)
#define V792N_INT_VECTOR_WO (DWORD) (0x100C)
#define V792N_CSR1_RO (DWORD) (0x100E)
#define V792N_CR1_RW (DWORD) (0x1010)
#define V792N_ADER_H_RW (DWORD) (0x1012)
#define V792N_ADER_L_RW (DWORD) (0x1014)
#define V792N_SINGLE_RST_WO (DWORD) (0x1016)
#define V792N_MCST_CBLT_CTRL_RW (DWORD) (0x101A)
#define V792N_EVTRIG_REG_RW (DWORD) (0x1020)
#define V792N_CSR2_RO (DWORD) (0x1022)
#define V792N_EVT_CNT_L_RO (DWORD) (0x1024)
#define V792N_EVT_CNT_H_RO (DWORD) (0x1026)
#define V792N_INCR_EVT_WO (DWORD) (0x1028)
#define V792N_INCR_OFFSET_WO (DWORD) (0x102A)
#define V792N_LD_TEST_RW (DWORD) (0x102C)
#define V792N_DELAY_CLEAR_RW (DWORD) (0x102E)
#define V792N_FCLR_WIN_RW (DWORD) (0x102E)
#define V792N_BIT_SET2_RW (DWORD) (0x1032)
#define V792N_BIT_CLEAR2_WO (DWORD) (0x1034)
#define V792N_W_MEM_TEST_WO (DWORD) (0x1036)
#define V792N_MEM_TEST_WORD_H_WO (DWORD) (0x1038)
#define V792N_MEM_TEST_WORD_L_WO (DWORD) (0x103A)
#define V792N_CRATE_SEL_RW (DWORD) (0x103C)
#define V792N_TEST_EVENT_WO (DWORD) (0x103E)
#define V792N_EVT_CNT_RST_WO (DWORD) (0x1040)
#define V792N_IPED_RW (DWORD) (0x1060)
#define V792N_R_MEM_TEST_WO (DWORD) (0x1064)
#define V792N_SWCOMM_WO (DWORD) (0x1068)
#define V792N_SLIDECONST_RW (DWORD) (0x106A)
#define V792N_AAD_RO (DWORD) (0x1070)
#define V792N_BAD_RO (DWORD) (0x1072)
#define V792N_THRES_BASE (DWORD) (0x1080)
WORD v792n_Read16(MVME_INTERFACE *mvme, DWORD base, int offset);
void v792n_Write16(MVME_INTERFACE *mvme, DWORD base, int offset, WORD value);
DWORD v792n_Read32(MVME_INTERFACE *mvme, DWORD base, int offset);
void v792n_Write32(MVME_INTERFACE *mvme, DWORD base, int offset, DWORD value);
int v792n_DataReady(MVME_INTERFACE *mvme, DWORD base);
int v792n_isEvtReady(MVME_INTERFACE *mvme, DWORD base);
int v792n_isBusy(MVME_INTERFACE *mvme, DWORD base);
int v792n_EventRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int *nentry);
int v792n_DataRead(MVME_INTERFACE *mvme, DWORD base, DWORD *pdest, int nentry);
void v792n_DataClear(MVME_INTERFACE *mvme, DWORD base);
void v792n_EvtCntRead(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt);
void v792n_EvtCntReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_IntSet(MVME_INTERFACE *mvme, DWORD base, int level, int vector);
void v792n_IntEnable(MVME_INTERFACE *mvme, DWORD base, int level);
void v792n_IntDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_EvtTriggerSet(MVME_INTERFACE *mvme, DWORD base, int count);
void v792n_SingleShotReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_SoftReset(MVME_INTERFACE *mvme, DWORD base);
void v792n_Trigger(MVME_INTERFACE *mvme, DWORD base);
int v792n_ThresholdRead(MVME_INTERFACE *mvme, DWORD base, WORD *threshold);
int v792n_ThresholdWrite(MVME_INTERFACE *mvme, DWORD base, WORD *threshold);
int v792n_CSR1Read(MVME_INTERFACE *mvme, DWORD base);
int v792n_CSR2Read(MVME_INTERFACE *mvme, DWORD base);
int v792n_BitSet2Read(MVME_INTERFACE *mvme, DWORD base);
void v792n_BitSet2Set(MVME_INTERFACE *mvme, DWORD base, WORD pat);
void v792n_BitSet2Clear(MVME_INTERFACE *mvme, DWORD base, WORD pat);
WORD v792n_ControlRegister1Read(MVME_INTERFACE *mvme, DWORD base);
void v792n_ControlRegister1Write(MVME_INTERFACE *mvme, DWORD base, WORD pat);
void v792n_OnlineSet(MVME_INTERFACE *mvme, DWORD base);
void v792n_OfflineSet(MVME_INTERFACE *mvme, DWORD base);
void v792n_BlkEndEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_OverRangeEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_OverRangeDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_LowThEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_LowThDisable(MVME_INTERFACE *mvme, DWORD base);
void v792n_EmptyEnable(MVME_INTERFACE *mvme, DWORD base);
void v792n_CrateSet(MVME_INTERFACE *mvme, DWORD base, DWORD *evtcnt);
void v792n_DelayClearSet(MVME_INTERFACE *mvme, DWORD base, int delay);
int v792n_Setup(MVME_INTERFACE *mvme, DWORD base, int mode);
void v792n_Status(MVME_INTERFACE *mvme, DWORD base);
int v792n_isPresent(MVME_INTERFACE *mvme, DWORD base);
enum v792n_DataType {
v792n_typeMeasurement=0,
v792n_typeHeader =2,
v792n_typeFooter =4,
v792n_typeFiller =6
};
typedef union {
DWORD raw;
struct v792n_Entry {
unsigned adc:12; // bit0 here
unsigned ov:1;
unsigned un:1;
unsigned _pad_1:3;
unsigned channel:4;
unsigned _pad_2:3;
unsigned type:3;
unsigned geo:5;
} data ;
struct v792n_Header {
unsigned _pad_1:8; // bit0 here
unsigned cnt:6;
unsigned _pad_2:2;
unsigned crate:8;
unsigned type:3;
unsigned geo:5;
} header;
struct v792n_Footer {
unsigned evtCnt:24; // bit0 here
unsigned type:3;
unsigned geo:5;
} footer;
} v792n_Data;
typedef union {
DWORD raw;
struct {
unsigned DataReady:1; // bit0 here
unsigned GlobalDataReady:1;
unsigned Busy:1;
unsigned GlobalBusy:1;
unsigned Amnesia:1;
unsigned Purge:1;
unsigned TermOn:1;
unsigned TermOff:1;
unsigned EventReady:1; //bit 8 here
};
} v792n_StatusRegister1;
typedef union {
DWORD raw;
struct {
unsigned _pad_1:1; // bit0 here
unsigned BufferEmpty:1;
unsigned BufferFull:1;
unsigned _pad_2:1;
unsigned PB:4;
//unsigned DSEL0:1;
//unsigned DSEL1:1;
//unsigned CSEL0:1;
//unsigned CSEL1:1;
};
} v792n_StatusRegister2;
typedef union {
DWORD raw;
struct {
unsigned _pad_1:2;
unsigned BlkEnd:1;
unsigned _pad_2:1;
unsigned ProgReset:1;
unsigned BErr:1;
unsigned Align64:1;
};
} v792n_ControlRegister1;
typedef union {
DWORD raw;
struct {
unsigned MemTest:1;
unsigned OffLine:1;
unsigned ClearData:1;
unsigned OverRange:1;
unsigned LowThresh:1;
unsigned _pad_1:1;//bit5
unsigned TestAcq:1;
unsigned SLDEnable:1;
unsigned StepTH:1;
unsigned _pad_2:2;//bits 9-10
unsigned AutoIncr:1;
unsigned EmptyProg:1;
unsigned SlideSubEnable:1;
unsigned AllTrg:1;
};
} v792n_BitSet2Register;
void v792n_printEntry(const v792n_Data* v);
#ifdef __cplusplus
}
#endif
#endif // V792N_INCLUDE_H
/* emacs
* Local Variables:
* mode:C
* mode:font-lock
* tab-width: 8
* c-basic-offset: 2
* End:
*/
|
|