> I guess you have to do some debugging there. Note that "detached" transitions have 
> been implemented recently by Konstantin, so maybe your problem is related to that. 
> In this case Konstantin should check what's wrong.

Yes, I think there is a problem - cm_transition() starts the mtransition helper without the "-h expt" switch, so 
mtransition can only connect to the "default" experiment. Will fix. K.O.

> > We have seen on several daq systems this problem: we start a run and observe that the number of 
> > events written by mlogger to the output file is double the number of events actually collected. Upon 
> > inspection of the output file, we see that every event is written twice. Restarting the run usually fixes 
> > this problem.
> 
> mlogger.c fixed svn rev 4497. (from tr_start(), call tr_stop() if somehow it was not called already by end-run transition).

There is a new problem: after an unsuccessful run start, the next run start bombs with the error "output file runNNN.mid already exists". One way around this is to 
manually remove the useless data file, another is to bump up the run number. Better solution is to automatically erase the output file created by unsuccessful run 
starts.

K.O.

> > I guess you have to do some debugging there. Note that "detached" transitions have 
> > been implemented recently by Konstantin, so maybe your problem is related to that. 
> > In this case Konstantin should check what's wrong.
> 
> Yes, I think there is a problem - cm_transition() starts the mtransition helper without the "-h expt" switch, so 
> mtransition can only connect to the "default" experiment. Will fix. K.O.

Fixed midas.c svn rev 4506: in cm_transition(), always pass "-e expt" to mtransition, if connected remotely, pass the
"-h host:port".

svn rev 4506
K.O.

> > > We have seen on several daq systems this problem: we start a run and observe that the number of 
> > > events written by mlogger to the output file is double the number of events actually collected. Upon 
> > > inspection of the output file, we see that every event is written twice. Restarting the run usually fixes 
> > > this problem.
> > 
> > mlogger.c fixed svn rev 4497. (from tr_start(), call tr_stop() if somehow it was not called already by end-run transition).
> 
> There is a new problem: after an unsuccessful run start, the next run start bombs with the error "output file runNNN.mid already exists". One way around this is to 
> manually remove the useless data file, another is to bump up the run number. Better solution is to automatically erase the output file created by unsuccessful run 
> starts.

Stefan suggested implementing a new transition, TR_STARTABORT, issued if TR_START fails. mlogger can use it to cleanup open files, etc, similar to TR_STOP.

This is now implemented. In mlogger, TR_STARTABORT is similar to TR_STOP, but deletes open output files and does not save end-of-run information into databases, etc. mfe.c does not handle this trnasition yet, but I 
plan to add it - to fix the observed situations where the run failed to start, but some equipment does not know about it and continues to generate events and send data.

svn rev 4514
K.O.

> Stefan suggested implementing a new transition, TR_STARTABORT, issued if TR_START fails. mlogger can use it to cleanup open files, etc, similar to TR_STOP.
> 
> This is now implemented. In mlogger, TR_STARTABORT is similar to TR_STOP, but deletes open output files and does not save end-of-run information into databases, etc. mfe.c does not handle this trnasition yet, but I 
> plan to add it - to fix the observed situations where the run failed to start, but some equipment does not know about it and continues to generate events and send data.
> 
> svn rev 4514
> K.O.

There is one problem with the TR_STARTABORT: If you combine old and new clients they will crash, since the old clients don't know anything about TR_STARTABORT. The way to prevent this is to increase the Midas version from 
2.0.0 to 2.1.0. Then you will get a warning if you mix clients. Please test this and commit the change if it works.

> > Stefan suggested implementing a new transition, TR_STARTABORT, issued if TR_START fails. mlogger can use it to cleanup open files, etc, similar to TR_STOP.
> > 
> > This is now implemented. In mlogger, TR_STARTABORT is similar to TR_STOP, but deletes open output files and does not save end-of-run information into databases, etc. mfe.c does not handle this trnasition yet, but I 
> > plan to add it - to fix the observed situations where the run failed to start, but some equipment does not know about it and continues to generate events and send data.
> > 
> > svn rev 4514
> > K.O.
> 
> There is one problem with the TR_STARTABORT: If you combine old and new clients they will crash, since the old clients don't know anything about TR_STARTABORT. The way to prevent this is to increase the Midas version from 
> 2.0.0 to 2.1.0. Then you will get a warning if you mix clients. Please test this and commit the change if it works.

Are you sure? Only clients that register themselves to receive the TR_STARTABORT transition (via cm_register_transition()) will receive this transition.

As of now, the only client that registers and receives this transition is mlogger.

I also confirm that old clients that know nothing about TR_STARTABORT are *not* sent this transition. (this is tested).

K.O.

> Are you sure? Only clients that register themselves to receive the TR_STARTABORT transition (via cm_register_transition()) will receive this transition.
> 
> As of now, the only client that registers and receives this transition is mlogger.
> 
> I also confirm that old clients that know nothing about TR_STARTABORT are *not* sent this transition. (this is tested).

Ok, then we are fine.

I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
Please see the attachment.

> I tried to use odbedit to set the "/System/Prompt" to "%h:%e:%s %p> " and got a
> problem: pressing "Return" doesn't work any more. But "[%h:%e:%s]%p> " works fine.
> Please see the attachment.

I fixed that problem in SVN revision 4556. It occurred when the prompt does start with a 
'%' which nobody tried before...

Another problem while using odbedit.
I tried the batch mode of "odbedit". I created a key as "/A_Str" by mistake and 
wanted to delete it. Then "odbedit" failed to accept the "Return" key. Please see 
the screen-shot attached. :-(

/opt/DAQ/bot/midas/src/history_odbc.cxx: In member function 'virtual int 
SqlODBC::GetNumRows()':
/opt/DAQ/bot/midas/src/history_odbc.cxx:589: error: cannot convert 'SQLINTEGER*' 
to 'long int*' for argument '2' to 'SQLRETURN SQLRowCount(void*, long int*)'
/opt/DAQ/bot/midas/src/history_odbc.cxx: In member function 'virtual const char* 
SqlODBC::GetColumn(int)':
/opt/DAQ/bot/midas/src/history_odbc.cxx:638: error: cannot convert 'SQLINTEGER*' 
to 'long int*' for argument '6' to 'SQLRETURN SQLGetData(void*, SQLUSMALLINT, 
SQLSMALLINT, void*, long int, long int*)'
make[2]: *** [CMakeFiles/midas-static.dir/src/history_odbc.cxx.o] Error 1
make[2]: Leaving directory `/opt/DAQ/bot/midas/build'
make[1]: *** [CMakeFiles/midas-static.dir/all] Error 2
make[1]: Leaving directory `/opt/DAQ/bot/midas/build'

> Another problem while using odbedit.
> I tried the batch mode of "odbedit". I created a key as "/A_Str" by mistake and 
> wanted to delete it. Then "odbedit" failed to accept the "Return" key. Please see 
> the screen-shot attached. :-(

This bug has been fixed in the latest repository.
I encountered it in svn-r4488.

$ odbedit -e expcvadc
odbedit: /opt/DAQ/repos/bot/midas/src/odb.c:651: db_validate_sizes: Assertion `sizeof(EQUIPMENT_INFO) == 400' failed.
zsh: abort      odbedit -e expcvadc

-----------------------------------------------------------------------
r4568 | olchanski | 2009-09-27 23:56:39 +0800 (日, 27  9月 2009) | 5 lines

mhttpd: compile using the C++ compiler.
mhttpd: fix wrong initialization of /History/ODBC_DSN
odb.c: size of EQUIPMENT_INFO has changed.
Makefile: use "-O2" compiler flag instead of "-O3" - to fix SL5 gcc crash (ICE) 

Linking CXX executable bin/mh2sql
CMakeFiles/mh2sql.dir/utils/mh2sql.cxx.o: In function `main':
/opt/DAQ/repos/bot/midas/utils/mh2sql.cxx:150: undefined reference to `MakeMidasHistoryODBC()'

> $ odbedit -e expcvadc
> odbedit: /opt/DAQ/repos/bot/midas/src/odb.c:651: db_validate_sizes: Assertion 
`sizeof(EQUIPMENT_INFO) == 400' failed.

Yes, this is now fixed, svn rev 4571 should be okey. Sorry about causing this problem - Stefan added 
some useful additional data to EQUIPMENT_INFO and my check for binary compatibility caught it and 
complained. Unfortunately on Saturday Stefan had to abruptly go back to PSI and things have been a little 
bit chaotic because we did not complete the testing of all the new changes and additions.

K.O.

> Linking CXX executable bin/mh2sql
> CMakeFiles/mh2sql.dir/utils/mh2sql.cxx.o: In function `main':
> /opt/DAQ/repos/bot/midas/utils/mh2sql.cxx:150: undefined reference to `MakeMidasHistoryODBC()'

Yes, I am in the process of changing the midas history interface and accidentally committed a version of 
mh2sql (utility for converting MIDAS history .hst files to SQL database) that uses the new interface.

This is now fixed in svn rev 4571.

The new C++ interface to the MIDAS history is in include/history.h and implementations for data storage 
using both midas .hst files and SQL (ODBC/MySQL) database are also committed (history_midas.cxx
and history_sql.cxx). The file history_odbc.cxx will be removed after some more testing of the new 
interface.

(All the new code is not activated yet, pending more testing).

K.O.

The latest version of mfe.c has a problem where poll_event() is called before
frontend_init() and this causes a crash because in poll_event() we try to access
VME before it is initialized in frontend_init(). K.O.

> The latest version of mfe.c has a problem where poll_event() is called before
> frontend_init() and this causes a crash because in poll_event() we try to access
> VME before it is initialized in frontend_init(). K.O.

Oops, that sneaked in when doing the last modification to display the frontend status. 
I refactored register_equipment() so that frontend_init() gets called before 
poll_event().

I have experienced a problem building MIDAS from the head of the SVN repository (rev 4458) when 
specifying the shared library flag. Whie the shared library appears to compile and link OK, the 
subsequent compilation of mserver fails as follows:

$ make ROOTSYS= NEED_SHLIB=1

<... snipped some lines ...>

ld -shared -o linux/lib/libmidas.so linux/lib/midas.o linux/lib/system.o linux/lib/mrpc.o 
linux/lib/odb.o linux/lib/ybos.o linux/lib/ftplib.o linux/lib/mxml.o linux/lib/history_midas.o 
linux/lib/history_sql.o linux/lib/history.o linux/lib/alarm.o linux/lib/elog.o linux/lib/strlcpy.o -lutil -
lpthread -lz -lc
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o linux/lib/mana.o 
src/mana.c
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o 
linux/lib/cnaf_callback.o src/cnaf_callback.c
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o linux/lib/mfe.o 
src/mfe.c
g++ -Dextname -DMANA_LITE -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -
Llinux/lib -DINCLUDE_FTPLIB   -D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-
unused-function -o linux/lib/fal.o src/fal.c
cc -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB   -
D_LARGEFILE64_SOURCE -DHAVE_ZLIB -DOS_LINUX -fPIC -Wno-unused-function -o 
linux/bin/mserver src/mserver.c -lmidas -Wl,-rpath,/usr/local/lib -lutil -lpthread -lz
/usr/bin/ld: linux/bin/mserver: hidden symbol `__dso_handle' in /usr/lib/gcc/x86_64-redhat-
linux/4.1.2/crtbegin.o is referenced by DSO
/usr/bin/ld: final link failed: Nonrepresentable section on output
collect2: ld returned 1 exit status
make: *** [linux/bin/mserver] Error 1

Having googled the error, it appears to be solved by modifying the linker statement for the shared 
library in the Makefile at line 464 to use g++ rather than ld:

463c463
< 	ld -shared -o $@ $^ $(LIBS) -lc
---
> 	$(CXX) -shared -o $@ $^ $(LIBS) -lc

Presumably this is because g++ knows better how to link in the appropriate system libraries required 
for some of the recently added C++ code? 

This was on Scientific Linux SL5.2 x86_64, gcc version 4.1.2, glibc version 2.5-24.

Tim