 28 Jul 2018, Hiroaki Natori, Forum, Question about distributing event builder function on remote PC
|
Dear Mr. Olchanski
Thank you for your comment.
|
 24 Jun 2019, Hassan, Bug Report, ERROR INSTALLING 32BIT MIDAS LIBRARIES ON 64BIT HOST MACHINE
|
Hi, we are part of the Mu3e research based at University of Bristol. We have a
remote 32 bit frontend (raspberry pi) connected to a 64 bit Data Acquisition
system.we are following the instructions at installation/quickstart linux/Build
|
|
26 Jun 2019, Hassan, Bug Report, ERROR INSTALLING 32BIT MIDAS LIBRARIES ON 64BIT HOST MACHINE
|
Thanks for your advice. We now have Midas installed on both our machines (remote machine-Rpi &
hostmachine-Centos).
|
|
26 Jun 2019, Hassan, Forum, Problem transferring fetest data from the remote frontend to the backend
|
Hi again, we now have Midas installed on the Rpi (remote frontend machine) and
have managed to run Fetest on it. Now we are at a stage where we want to send
the Fetest data over to the Data Acquisition machine, which also has Midas
|
|
27 Jun 2019, Hassan, Bug Report, Getting an error when trying to compile a frontend file
|
When we run the following commands on the hostname(DAQ machine) and the remote
frontend(Rpi):
cd $HOME/online
|
|
27 Jun 2019, Hassan, ,
|
| |
|
05 Jul 2019, Hassan, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
First of all thank you for all the assistance provided so far, especially making
changes to the code in CMakeList file previously for our configuration.I am not
sure whether this is an appropriate Elog for this matter but we are getting the
|
|
10 Jul 2019, Hassan, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
Hi, we have now done a clean install of Root and after some dynamic linking we have been able to make Rootana and analyzer. However we get an error when
we try to run analyzer.
--------------------------------------------------------------------------------------------------------------------------------------------------
|
|
22 Jul 2019, Hassan, Bug Report, Fetest History Plot
|
Hi,
We've been trying to run Fetest in the attempt of plotting the sine wave data on
|
|
25 Jul 2019, Hassan, Bug Report, Fetest History Plot
|
=================================================================
|
|
26 Jul 2019, Hassan, Bug Report, Fetest History Plot
|
===================================================================================
[lm17773@it038146 ~]$ cd /opt/midas_software/midas/bin/
|
|
26 Jul 2019, Hassan, Bug Report, Fetest History Plot
|
Hi, our logger was running. I have tried restarting mlogger (even though we haven't
changed variable names). We ran the following commands one after another and still no
luck with history plot. Is there anything else that could be causing these problems?
|
|
26 Oct 2006, Hans Fynbo, Forum, Setup of Ortec ADC AD413A in MIDAS
|
We are new to MIDAS and try to setup a simple system with one ortec camac ADC
AD413A and the hytec1331 controler. Has anyone used this module in MIDAS we
would be grateful for the corresponding frontend.c etc.
|
|
21 Apr 2023, Grzegorz Nieradka, Forum, Setup Midas with Caen vx2740 - ask for help
|
I'm trying to setup Midas with the Caen vx2740 VME digitizer board.
As the backend driver I used the software from Darkside located here:
|
|
18 Mar 2024, Grzegorz Nieradka, Bug Report, Midas (manalyzer) + ROOT 6.31/01 - compilation error
|
I tried to update MIDAS installation on Ubuntu 22.04.1 to the latest commit at
the bitbucket.
|
19 Mar 2024, Grzegorz Nieradka, Bug Report, Midas (manalyzer) + ROOT 6.31/01 - compilation error 
|
Dear Konstantin,
Thank you for your interest in my problem.
|
|
28 Mar 2024, Grzegorz Nieradka, Bug Report, Midas (manalyzer) + ROOT 6.31/01 - compilation error
|
I found solution for my trouble. With MIDAS and ROOT everything is OK,
the trobule was with my Ubuntu enviroment.
|
|
02 Dec 2005, Greg Hackman, Info, MIDAS on Cygwin
|
If you want to run MIDAS on Cygwin, make sure you have cygserver running. First set a Windows system environment variable CYGWIN=server. This is best
done through the Control Panel -> System -> Advanced -> Environment Variables. Then run /usr/bin/cygserver-config in a Cygwin console window. Then reboot.
After that your MIDAS executables should run properly.
|
|
09 Jun 2012, Greg Christian, Bug Report, _net_send_buffer realloc
|
In midas.c, I noticed that memory is only allocated to the global buffer
_net_send_buffer by calling realloc() from within the function
resize_net_send_buffer() (at least this was the only place I could find
|
|
10 Jun 2012, Greg Christian, Bug Report, _net_send_buffer realloc
|
> > In midas.c, ...
> >
> > 1) _net_send_buffer is not set to NULL when declared.
|