Back Midas Rome Roody Rootana
  Midas DAQ System, Page 2 of 136  Not logged in ELOG logo
ID Date Author Topicup Subject
  131   13 Oct 2003 Stefan Ritt Array overruns in mhttpd.c::submit_elog()
> > While adding new functionality to submit_elog() (add the message text to 
the
> > outgoing email), I noticed that the email text is being stored into an 
array
> > of size 256, mail_text[256], without any checks for array overrun. This
> > cannot be good. How should this be corrected?
> > K.O.
> 
> Similar problem exists in midas.c::el_submit(). The array "message[10000]" 
is
> easy to overrun by submitting a long elog message.
> 
> K.O.

The whole elog functionality in mhttpd will be replaced (sometime) by the 
standalone ELOG package, linked against mhttpd. The ELOG functionality is 
much richer and does not conatin all the mentioned problems which have been 
fixed there some time ago. For the time being it might however be worth to 
fix the mentioned problems, but without spending too much time on it.
  126   13 Oct 2003 Stefan Ritt mhttpd: add Elog text to outgoing email.
> around to implement it, until now. I also added assert() traps for the most
> common array overruns in the Elog code.

In addition to the assert() one should use strlcat() and strlcpy() all over 
the code to avoid buffer overruns. The ELOG standalone code does that already 
properly.

- Stefan
  127   13 Oct 2003 Konstantin Olchanski mhttpd: add Elog text to outgoing email.
> > around to implement it, until now. I also added assert() traps for the most
> > common array overruns in the Elog code.
> 
> In addition to the assert() one should use strlcat() and strlcpy() all over 
> the code to avoid buffer overruns. The ELOG standalone code does that already 
> properly.
> 
> - Stefan

Yes, the original authors should have used strlcat(). Now that I uncovered this source of mhttpd 
memory corruption, maybe some volunteer will fix it up properly.

K.O.
  132   13 Oct 2003 Konstantin Olchanski Array overruns in mhttpd.c::submit_elog()
> > > While adding new functionality to submit_elog() ....
> 
> The whole elog functionality in mhttpd will be replaced (sometime) ...

I humbly submit that this has been the standard reply for the last 2 years since I was aware of 
the "last N days does not always work" problem (just saw it again yesterday).

K.O.
  128   13 Oct 2003 Stefan Ritt mhttpd: add Elog text to outgoing email.
> > > around to implement it, until now. I also added assert() traps for the 
most
> > > common array overruns in the Elog code.
> > 
> > In addition to the assert() one should use strlcat() and strlcpy() all 
over 
> > the code to avoid buffer overruns. The ELOG standalone code does that 
already 
> > properly.
> > 
> > - Stefan
> 
> Yes, the original authors should have used strlcat(). Now that I uncovered 
this source of mhttpd 
> memory corruption, maybe some volunteer will fix it up properly.
> 
> K.O.

I am the original author and will fix all that once I merged mhttpd and elog. 
Due to my current task list, this will happen probably in November.

- Stefan
  122   15 Oct 2003 Konstantin Olchanski test
test
test
test
  123   15 Oct 2003 Konstantin Olchanski test
> test
> test
> test

another test

K.O.
  124   15 Oct 2003 Stefan Ritt test
> > test
> > test
> > test
> 
> another test
> 
> K.O.

I got the two email notifications, if you have tried that...
  120   16 Oct 2003 David Morris Updated thread functions
ss_thread_create now returns the thread ID on success, and zero on failure.
Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
return value to determine result.

ss_thread_kill added to kill the passed thread ID. Returns SS_SUCCESS or
SS_NO_THREAD.

Any thread creation must be verified now, and old code must be examined to
ensure the return value is checked.
  121   28 Oct 2003 Stefan Ritt Updated thread functions
> ss_thread_create now returns the thread ID on success, and zero on failure.
> Previously returned SS_SUCCESS or SS_NO_THREAD. User must now test the
> return value to determine result.
> 
> ss_thread_kill added to kill the passed thread ID. Returns SS_SUCCESS or
> SS_NO_THREAD.
> 
> Any thread creation must be verified now, and old code must be examined to
> ensure the return value is checked.

Thank you for that post. Internally, threads are not use in midas, so there 
should be no problem. Only experiments using threads explicitly should take 
care.
  119   30 Oct 2003 Stefan Ritt 'umask' added to lazylogger for FTP connections
I had to add a 'umask' opiton to the loggers (lazy and mlogger) for the new 
PSI archive. One can now put a filename into the settings like:

archive,21,user,pw,dir,run%05d.mid,026

where the optional last parameter is used for a "umask 026" command just 
sent to the FTP server after the connection has been established. This 
changes the mode bits of the newly transferred file. We needed that so that 
the files are group readable, since several people from one group want to 
read the data.

I committed mlogger.c and ybos.c which contains the ftp code (should 
actually go into lazylogger.c instead of ybos.c).
  118   30 Oct 2003 Stefan Ritt Fixed several potential problems for ODB corruption
I just realized that db_set_value, db_set_data, db_set_num_values and 
db_merge_data do not check for num_values == 0. With such a parameter the 
ODB can become corrupted, since zero length ODB entries are not allowed. I 
fixed the according places in odb.c and committed the changes. Everyone 
with ODB corruption problems should update that code.
  114   31 Oct 2003 Konstantin Olchanski mana.c without ROOT and HBOOK
Stephan, why did you prohibit building mana.c without ROOT and HBOOK
support? I think such a configuration is valid and should be allowed.

Also, this prohibition broke the Midas Makefile, it now bombs building
mana.c. The Makefile is setup for building hmana.c with HBOOK support,
rmana.c with ROOT support (if ROOTSYS is set) and mana.c without HBOOK and
ROOT support (currently bombs on #error in mana.c).

K.O.
  117   31 Oct 2003 Konstantin Olchanski Disable "tab"s in xemacs
The default C indentation style in xemacs uses "tab" characters, violating
the MIDAS coding convention. To disable this misfeature in xemacs (emacs
too?), put this incantation in your .xemacs/custom.el file:

(custom-set-variables
 '(indent-tabs-mode nil))

K.O.
  107   31 Oct 2003 Konstantin Olchanski more odb "run number" error checking
I added error checking to the places where we read "/runinfo/run number". In
general, I do this:

  status = db_get_value("/runinfo/run number",&run_number);
  assert(status==SUCCESS);
  assert(run_number >= 0); (and run_number>0, where appropriate)

Here is the rationale: if we cannot read the run number, something must be
very terribly wrong. I cannot think of any recovery action other than
abort() and make a core dump for our debugging enjoyment.

I considered and rejected adding a "retry" loop: if we allow db_get_value()
to intermittently fail, then it's every use has to be wrapped in a retry
loop, which then should be inside db_get_value(), making it pointless to
have external "retry" loops.

I am now pondering on proposing a "db_get_value_cannot_possibly_fail()"
function (it would abort(), exit() with an error or commit harakiri if it
can't get the value). They way most db_xxx() functions are used in midas,
maybe they should be made "void" and "unfailible", with "STATUS
db_xxx_yes_I_can_fail_and_return_an_error_code()" evil twins. I guess this
is why "they" invented C/C++ exceptions. Anyway, something to think about.

Affected files:
src/lazylogger.c
src/odbedit.c
src/mlogger.c
src/mfe.c
src/odb.c
src/mana.c
src/midas.c
src/mhttpd.c

K.O.
  111   31 Oct 2003 Konstantin Olchanski Do not frob "/runinfo" in mhttpd.c
I found where we tickle the race condition in db_create_record().

1) in mhttpd.c,  every time we show the status page, we call
db_create_record(hDB, 0, "/Runinfo", strcomb(runinfo_str));
2) internally db_create_record() deletes /RunInfo
3) other programs read "/runinfo/run number" while it is deleted do not
check for the db_get_value() error code and happily get a zero run number.

Stephan fixed the race condition, and now I commited an mhttpd.c change that
only calls db_create_record(hDB, 0, "/Runinfo", strcomb(runinfo_str)); if
/runinfo does not exist. This seems to be redundant with a similar call in
cm_connect_experiment1(), called each time a new client starts up.

Files changed:
src/mhttpd.c

K.O.
  115   01 Nov 2003 Stefan Ritt mana.c without ROOT and HBOOK
> Stephan, why did you prohibit building mana.c without ROOT and HBOOK
> support? I think such a configuration is valid and should be allowed.

Oops, sorry, my fault. I forgto that people use mana.c without ROOT and 
HBOOK. The reason I made the change was that people forgot the -DHVAE_HBOOK 
in their makefile. In that case, no HBOOK init is done in mana.c and the 
first histogram booking in the user code crashes HBOOK.

So please take the #error statement out of mana.c (I'm away in two hours for 
one week), but think about preventing the above mentionend problem. I don't 
know any way for the makefile or mana.c to figure out if there is any HF1 
call in the user code. Actually HF1 should return a "proper" error message 
than just crashing.

One possibility is that we put an additional layer on top of the histogram 
boooking/filling. These macros are converted to their HBOOK or ROOT 
equivalents depending on the HAVE_HBOOK/HAVE_ROOT. If none of both is 
present, the histogram booking macro can produce a runtime error. This has 
the additional advantage that users can switch from HBOOK to ROOT without 
change of their user code.
  112   01 Nov 2003 Stefan Ritt Do not frob
> I found where we tickle the race condition in db_create_record().
> 
> 1) in mhttpd.c,  every time we show the status page, we call
> db_create_record(hDB, 0, "/Runinfo", strcomb(runinfo_str));
> 2) internally db_create_record() deletes /RunInfo
> 3) other programs read "/runinfo/run number" while it is deleted do not
> check for the db_get_value() error code and happily get a zero run number.
> 
> Stephan fixed the race condition, and now I commited an mhttpd.c change that
> only calls db_create_record(hDB, 0, "/Runinfo", strcomb(runinfo_str)); if
> /runinfo does not exist. This seems to be redundant with a similar call in
> cm_connect_experiment1(), called each time a new client starts up.

The reason for the db_create_record() is the following: Assume that we change 
the /runinfo structure, by adding an additional variable in the future. If we 
run a "new" mhttpd on an "old" experiment, the "runinfo" C structure does not 
match the ODB contents. The db_create_record() ensures that the ODB structure 
exactly matches the C structure. I agree with you that this can cause 
potential problems. But most of them should be fixed by the additional lock() 
I added recently. So other programs cannot read the run number while it is 
deleted.

One could think of checking the record size, and re-creating the runinfo if 
the ODB record size does not match the C record size. But this does not 
prevent the potential error that some variable are reversed in order. They 
are then mapped wrongly to the C runinfo structure.

I see that you work very hard now on all possible checks for the run number. 
But I would not commit that and make it part of the distribution, since all 
experiments at PSI for example do not have this run number problem. Run it 
locally, determine the cause of your problem (the discovery of the race 
condition was already very good, I'm glad that your found it, should make the 
system much more stable), and we'll fix it. Puttin ASSERT's is a good idea, I 
should have done it from the very beginning. But if you start now, please put 
it in all other 100000 places (;-)

I would not add a db_get_value_cannot_possibly_fail() into the standard 
distribution, because it probably cannot correct the initial problem and then 
just will go into an infinite loop. We should tackle problems always at their 
source. 

If you cannot resolve your zero run number problem, do the following: There 
is a cm_msg(MDEBUG, ...) which only puts a message into the shared memory, 
but not in midas.log. This can be used for real time debugging. Add those 
message temporarily in db_get_value() etc. to see what is going on. As soon 
as the run number goes to zero, stop all processes immediately (for example 
by locking the database with db_lock_database), and the look backwards in the 
sysmsg buffer to see what happened *before* the run number went to zero.

- Stefan
  108   01 Nov 2003 Stefan Ritt more odb
> I added error checking to the places where we read "/runinfo/run number". In
> general, I do this:

> Affected files:
> src/lazylogger.c
> src/odbedit.c
> src/mlogger.c
> src/mfe.c
> src/odb.c
> src/mana.c
> src/midas.c
> src/mhttpd.c

Now YOU broke the system by editing all these files with something I consider 
temporary debugging code. A run number of zero is *VALILD*. If I want to make 
sure a new experiment starts with run number #1, I put a run number of 0 into 
the ODB. So on the first start the number is incremented by one which results 
in run number from one. So please remove those checks which prevents me of 
doing that. Again, your "run number zero" problem is soemhow specific to your 
environment, and I would not put all these tests into the distribution, 
because this can have side effects, like that one I described above.

- Stefan
  109   01 Nov 2003 Konstantin Olchanski more odb
> > I added error checking to the places where we read "/runinfo/run number". 
> Now YOU broke the system by editing all these files with something I consider 
> temporary debugging code. A run number of zero is *VALILD*.

I think I broke nothing. I do know that run number 0 is a valid odb value. Here
is an audit of all places where I abort on invalid run numbers:

mana.c: line 3676: assert(current_run_number > 0);
we take the run number from an event and write it into ODB. Events cannot have
run number negative or zero.

mana.c:analyze_run(): line 4632: assert(run_number > 0);
we are asked to analyze run "run_number". zero or negative is not valid.

midas.c:assert(run_number > old_run_number);
midas.c:assert(run_number > 1);
this code is not in CVS.

odbedit.c: line 2563: assert(old_run_number >= 0);
run number zero is valid

odbedit.c: line 2641: assert(new_run_number > 0);
starting a new run number zero is not valid

mfe.c: line 1786: if (run_number<=0) cm_msg(MERROR, "main", "aborting on attempt
to use invalid run number %d", run_number);
auto restart from run 0 to 1 is not valid

midas.c: line 3917: if (run_number<=0) cm_msg(MERROR, "cm_transition", "aborting
on attempt to use invalid run number %d",run_number);
transition to run zero or negative is not valid

midas.c: line 16101: if (run_number<0) cm_msg(MERROR, "el_submit", "aborting on
attempt to use invalid run number %d", run_number);
negative run numbers are not valid

mlogger.c: line 3301: if (run_number<=0) cm_msg(MERROR, "main", "aborting on
attempt to use invalid run number %d", run_number);
auto restart from run 0 to run 1 is not valid

K.O.
ELOG V3.1.4-2e1708b5