Back Midas Rome Roody Rootana
  Midas DAQ System, Page 2 of 136  Not logged in ELOG logo
    Reply  16 Oct 2006, Stefan Ritt, Bug Fix, "make install" error on MacOS 10.4.7, svn 3366 
> While executing "make install" under MacOS 10.4.7, you may encounter errors about "dio". It is the 
> problem of "Makefile". I did some change to it and attach the diff file here.
    Reply  19 Feb 2008, Maggie Lee, Bug Fix, "make install" error on MacOS 10.4.7, svn 3366 
> While executing "make install" under MacOS 10.4.7, you may encounter errors about "dio". It is the 
> problem of "Makefile". I did some change to it and attach the diff file here.
    Reply  19 Feb 2008, Maggie Lee, Bug Fix, "make install" error on MacOS 10.4.7, svn 3366 
I forgot to mention that, the following (and similar) lines:
           install -v -D -m 755 $$file $(SYSBIN_DIR)/`basename $$file` ; \
are changed into
    Reply  19 Feb 2008, Stefan Ritt, Bug Fix, "make install" error on MacOS 10.4.7, svn 3366 
> I forgot to mention that, the following (and similar) lines:
>            install -v -D -m 755 $$file $(SYSBIN_DIR)/`basename $$file` ; \
> are changed into
    Reply  19 Feb 2008, Maggie Lee, Bug Fix, "make install" error on MacOS 10.4.7, svn 3366 
Thank you for your help =)

Since SYSBIN_DIR is defined as /usr/local/bin in the Makefile and it exists in my computer, so I deleted the -D in the Makefile and tried to "make install"
Entry  17 Oct 2005, Exaos Lee, Bug Fix, "make install" error under MacOS X 
Under MacOS X, "make install" will cours an error like this:
[code]
...
Entry  26 Nov 2009, Konstantin Olchanski, Bug Report, "mserver -s" is broken 
I notice that "mserver -s" (a non-default mode of operation) does not work right
- if I connect odbedit for the first time, all is okey, if I connect the second
time, mserver crashes - because after the first connection closed,
    Reply  27 Nov 2009, Stefan Ritt, Bug Report, "mserver -s" is broken 
> I notice that "mserver -s" (a non-default mode of operation) does not work right
> - if I connect odbedit for the first time, all is okey, if I connect the second
> time, mserver crashes - because after the first connection closed,
    Reply  27 Nov 2009, Konstantin Olchanski, Bug Report, "mserver -s" is broken 

> "mserver -s" is there for historical reasons and for debugging.
>
Entry  31 Mar 2022, Konstantin Olchanski, Bug Fix, "run stop" trouble in mlogger, fixed 
while debugging something else, I ran into a bit of trouble in mlogger.

I set the mlogger event limit to 100, and after reaching 100 events, mlogger
Entry  30 Oct 2003, Stefan Ritt, , 'umask' added to lazylogger for FTP connections 
I had to add a 'umask' opiton to the loggers (lazy and mlogger) for the new 
PSI archive. One can now put a filename into the settings like:
Entry  26 Jan 2022, Frederik Wauters, Forum, .gz files 
I adapted our analyzer to compile against the manalyzer included in the midas repo.

All our data files are .mid.gz, which now fail to process :(
    Reply  26 Jan 2022, Konstantin Olchanski, Forum, .gz files 
> I adapted our analyzer to compile against the manalyzer included in the midas repo.
> TMReadEvent: error: short read 0 instead of -1193512213
    Reply  31 Jan 2022, Frederik Wauters, Forum, .gz files 
> > I adapted our analyzer to compile against the manalyzer included in the midas repo.
> > TMReadEvent: error: short read 0 instead of -1193512213
Entry  09 Mar 2016, Konstantin Olchanski, Info, /Experiment/Edit on start/Edit Run number 
The MIDAS documentation here:
  https://midas.triumf.ca/MidasWiki/index.php/Edit-on-start_Parameters
is missing informaiton about this ODB entry:
Entry  15 Jun 2021, Konstantin Olchanski, Info, 1000 Mbytes/sec through midas achieved! 
I am sure everybody else has 10gige and 40gige networks and are sending terabytes of data before breakfast.

Myself, I only have one computer with a 10gige network link and sufficient number of daq boards to fill
    Reply  15 Jun 2021, Stefan Ritt, Info, 1000 Mbytes/sec through midas achieved! frontend.cxx
In MEG II we also kind of achieved this rate. Marco F. will post an entry soon to describe the details. There is only one thing 
I want to mention, which is our network switch. Instead of an expensive high-grade switch, we chose a cheap "Chinese" high-grade 
switch. We have "rack switches", which are collector switch for each rack receiving up to 10 x 1GBit inputs, and outputting 1 x 
    Reply  16 Jun 2021, Marco Francesconi, Info, 1000 Mbytes/sec through midas achieved! 
As reported by Stefan, in MEG II we have very similar ethernet throughputs.
In total, we have 34 crates each with 32 DRS4 digitiser chips and a single 1 Gbps readout link through a Xilinx Zynq SoC.
The data arrives in push mode without any external intervention, the only throttling being an optional prescaling on the trigger rate.
    Reply  18 Jun 2021, Konstantin Olchanski, Info, 1000 Mbytes/sec through midas achieved! 
> In MEG II we also kind of achieved this rate.
>
> Instead of an expensive high-grade switch, we chose a cheap "Chinese" high-grade switch.
    Reply  18 Jun 2021, Konstantin Olchanski, Info, 1000 Mbytes/sec through midas achieved! 
> ... MEG II ... 34 crates each with 32 DRS4 digitiser chips and a single 1 Gbps readout link through a Xilinx Zynq SoC.
>
> Zynq ... embedded ethernet MAC does not support jumbo frames (always read the fine prints in the manuals!)
ELOG V3.1.4-2e1708b5