 09 May 2007, Carl Metelko, Forum, Splitting data transfer and control onto different networks
|
Hi,
I'm setting up a system with two networks with the intension of having
control info (odb, alarm) on the 192.168.0.x
|
 09 May 2007, Stefan Ritt, Forum, Splitting data transfer and control onto different networks
|
Hi Carl,
so far I did not experience any problems of running odb&alarm on the same link as
|
|
09 May 2007, Konstantin Olchanski, Forum, Splitting data transfer and control onto different networks
|
> I'm setting up a system with two networks with the intension of having
> control info (odb, alarm) on the 192.168.0.x
> and the frontend readout on 192.168.1.x
|
|
14 May 2007, Carl Metelko, Forum, Splitting data transfer and control onto different networks
|
Hi,
thanks for the advice. We do have dual core Xeons so we'll try running
most things on the server. Unless it proves to be a problem we'll run all
|
|
10 May 2007, Konstantin Olchanski, Bug Fix, Fix error reporting from cm_transition()
|
For some time now, error reporting from cm_transition() was broken.
Typical symptom was when starting a run from mhttpd, when a transition error occurred, the run does not
|
|
10 May 2007, Konstantin Olchanski, Bug Fix, mhttpd: fix broken boolean arrays in "edit on start"
|
For some time now, boolean arrays did not work correctly in "/experiment/edit on start". This is now fixed
in rev 3680. K.O. |
|
10 Apr 2007, Dan Gastler, Forum, Interrupt code for VME?
|
Hello,
Is there any example code for using midas for interrupt driven data
collection over VME? I am using a Struck SIS3100 PCI/VME setup to connect to my
|
|
09 Apr 2007, Konstantin Olchanski, Info, move history, elog and alarm functions into separate files
|
As approved by Stefan, I moved the history (hs_xxx), alarm (al_xxx) and elog (el_xxx) functions out of
midas.c into separate files. Commited as revision 3665. This change should be transparent to all users.
K.O. |
|
02 Apr 2007, Exaos Lee, Bug Fix, SIGABT of "mlogger" and possible fix
|
Version: svn 3658
Code: mlogger.c
Problem: After executation of "mlogger", a "SIGABT" appears.
|
|
03 Apr 2007, Stefan Ritt, Bug Fix, SIGABT of "mlogger" and possible fix
|
[quote="Exaos Lee"]Version: svn 3658
Code: mlogger.c
Problem: After executation of "mlogger", a "SIGABT" appears.
|
|
03 Apr 2007, Stefan Ritt, Info, Switch to Visual C++ 2005 under Windows
|
I had to switch to Visual C++ 2005 under Windows. This required the upgrade of
all project files under \midas\nt\ and fixing a few warnings, since the new
compiler is more picky.
|
|
23 Feb 2007, Konstantin Olchanski, Info, RFC- history system improvements
|
While running the ALPHA experiment at CERN, we stressed and broke the MIDAS history system. We
generated about 0.5 GB of history data per day, and this killed the performance of the history plot
system in mhttpd - we had to wait for *minutes* to look at any plots of any variables.
|
|
26 Feb 2007, Stefan Ritt, Info, RFC- history system improvements
|
I agree to what you propose. I'm pretty sure you are right in getting a significant improvement in readout speed
of the history system. So far there was no big request for improving the history system, since the performance in
the experiments I was involved in was good. In MEG for example, we have ~20MB of history data per day, and all
|
|
16 Mar 2007, Konstantin Olchanski, Info, RFC- history system improvements
|
> Let's improve the midas history system...
After implementing 2 prototypes, one aspect of the new design is starting to firm up enough to write it down (I do so in a mock FAQ format).
|
|
06 Mar 2007, Konstantin Olchanski, Info, commited mhttpd fixes & improvements
|
I commited the mhttpd fixes and improvements to the history code accumulated while running the ALPHA
experiment at CERN:
|
|
27 Feb 2007, Piotr Zolnierczuk, Forum, event builder scalability
|
Hi there:
I have a question if there's anybody out there running MIDAS with event builder
that assembles events from more that just a few front ends (say on the order of
|
|
27 Feb 2007, Stefan Ritt, Forum, event builder scalability
|
> Hi there:
> I have a question if there's anybody out there running MIDAS with event builder
> that assembles events from more that just a few front ends (say on the order of
|
|
27 Feb 2007, John M O'Donnell, Forum, event builder scalability
|
At Los Alamos, we have 15+1 frontends - the 15 between them read about 2 or 3
TB/hour and reduce it to 1 to 5 GB/hour which is then sent to the mevb on a 17th
computer. The 16th frontend handles deadtime issues and scalers (small data rate).
|
|
27 Feb 2007, Stefan Ritt, Forum, event builder scalability
|
> Our bottle neck is (a) compactPCI backplane reading data from waveform digitizers
> to the frontend CPUs and (b) CPU power on the frontend CPUs to analyzer the waveforms.
|
|
02 Mar 2007, Kevin Lynch, Forum, event builder scalability
|
> Hi there:
> I have a question if there's anybody out there running MIDAS with event builder
> that assembles events from more that just a few front ends (say on the order of
|
|
03 Mar 2007, Piotr Zolnierczuk, Forum, event builder scalability
|
Hi all,
thank you for all responses.
|
|
03 Mar 2007, Stefan Ritt, Forum, event builder scalability
|
> It seems that there's no problem running MIDAS with event builder assembling
> data from ~10 front-ends. How about ~100? One possible solution is to have a
> multi-tiered architecture.
|
|
26 Feb 2007, Stefan Ritt, Info, Fragmented polled events
|
Fragmented polled events have been implemented in SVN revision 3625.
Fragmentation is a method of breaking down large (>MB) events into smaller
pieces and send them through the shared memory buffers, reassembling them at the
|
|
26 Feb 2007, Stefan Ritt, Info, Usage of event channel for improved throughput
|
Starting from SVN revision 3642, sending events from the front-end has been revised.
Since long time ago, there is a special TCP socket established between any front-end and the mserver which can be used to bypass the midas RPC layer completely |
|
23 Feb 2007, Konstantin Olchanski, Info, RFC- support for writing to removable hard disk storage
|
At triumf, we are developing a system to use removable hard drives to store data collected by midas
daq stations. The basic idea is to replace storage on 300 GB DLT tapes with storage on removable
esata, usb2 or firewire 750 GB hard drives.
|
|
23 Feb 2007, John M O'Donnell, Info, RFC- support for writing to removable hard disk storage
|
We stopped using tapes at Los Alamos a while ago. The model we use is:
write data with mlogger to a local RAID system. This is NFS mounted read only on teh analysis machines, and
|
|
26 Feb 2007, Stefan Ritt, Info, RFC- support for writing to removable hard disk storage
|
In the MEG experiment, we simply installed 100TB of RAID disks and don't need to change anything ;)
But seriously, you are right that such a system might be beneficial. I propose to extend the current logger code to switch disks. In the current tr_start() |
|
05 Feb 2007, Fedor Ignatov, Bug Report, segmentation violation of analyzer on a x86_64
|
Hello,
When I connect to analyzer on a x86_64 processor(with Roody),
|
|
06 Feb 2007, Stefan Ritt, Bug Report, segmentation violation of analyzer on a x86_64
|
> Hello,
>
> When I connect to analyzer on a x86_64 processor(with Roody),
|
|
06 Feb 2007, Fedor Ignatov, Bug Report, segmentation violation of analyzer on a x86_64
|
Yes right, Problem of a segmentation violation is solved with this patch. Now it works
fine on x86_64.
|
|
17 Feb 2007, Konstantin Olchanski, Bug Report, segmentation violation of analyzer on a x86_64
|
> Yes right, Problem of a segmentation violation is solved with this patch. Now it works
> fine on x86_64.
|
|
28 Jul 2006, Shawn Bishop, Bug Report, Latest FC5 Compilation attempt
|
Perhaps some progess? Problem for compilation on FC5 now seems to be in odb.c for revision 3189. Compilation output as follows: --Shawn
[COLOR=red][midas@daruma ~/midas]$ make
|
|
05 Aug 2006, Ryu Sawada, Bug Report, Latest FC5 Compilation attempt
|
Which version of compiler do you use ?
This is probably bug of GCC. Please refer following page.
|
|
08 Sep 2006, Ryu Sawada, Bug Report, Latest FC5 Compilation attempt
|
GCC developers fixed this problem in development version of GCC 4.2.
There will not be this problem in GCC 4.2 release version. |
|
15 Feb 2007, Ryu Sawada, Info, Latest FC5 Compilation attempt
|
On February 13, 2007, gcc 4.1.2 was released.
I checked this version, and it compiles midas successfully,
|
|
11 Feb 2007, Konstantin Olchanski, Info, svn and "make indent" trashed my svn checkout tree...
|
Fuming, fuming, fuming.
The combination of "make indent" and "svn update" completely trashed my work copy of midas. Half of
|
02 Feb 2007, Exaos Lee, Bug Report, Compiling failed with SVN3562 under Ubuntu 6.10 
|
I tried to solve the problem by adding a ";". It was wrong. In fact, the macro "_syscall0(..)" doesn't need the ";".
I searched and found that somebody said "the overall _syscall$magicnumber will disappear". I don't mind whether the "_syscall" disappear or not. I just
want to compile the code and do my job. I deleted the additional ";" and recompiled. The error output is as the attachment [elog:335/1]. |
|
02 Feb 2007, Exaos Lee, Bug Fix, Problem solved by Re-define _syscall0(...)
|
OK, I searched and found that my kernel doesn't support "_syscall0" any more. So I patched the system.c as the following (from line 954):
[CODE]
|
|
06 Feb 2007, Stefan Ritt, Bug Fix, Problem solved by Re-define _syscall0(...)
|
[quote="Exaos Lee"]Maybe it's not the perfect way, but it works. :-)[/quote]
I changed it to:
|
|
05 Feb 2007, Konstantin Olchanski, Bug Report, wrong version in include/midas.h?
|
The present .../include/midas.h contains
[alpha@laddvme06 ~/online]$ grep 1.9.5 /home/alpha/packages/midas/include/*
/home/alpha/packages/midas/include/midas.h:#define MIDAS_VERSION "1.9.5"
|
|
06 Feb 2007, Stefan Ritt, Bug Report, wrong version in include/midas.h?
|
> The present .../include/midas.h contains
> [alpha@laddvme06 ~/online]$ grep 1.9.5 /home/alpha/packages/midas/include/*
> /home/alpha/packages/midas/include/midas.h:#define MIDAS_VERSION "1.9.5"
|
|
02 Feb 2007, Exaos Lee, Bug Report, Compiling failed with SVN3562 under Ubuntu 6.10
|
The error log is as the following:
[CODE]
cc -c -g -O2 -Wall -Wuninitialized -Iinclude -Idrivers -I../mxml -Llinux/lib -DINCLUDE_FTPLIB -D_LARGEFILE64_SOURCE -DHAVE_MYSQL -DHAVE_ROOT -pthread |
|
02 Feb 2007, Exaos Lee, Bug Report, Compiling failed with SVN3562 under Ubuntu 6.10
|
I tried to solve the problem by adding a ";". It was wrong. In fact, the macro "_syscall0(..)" doesn't need the ";".
I searched and found that somebody said "the overall _syscall$magicnumber will disappear". I don't mind whether the "_syscall" disappear or not. I just
want to compile the code and do my job. I deleted the additional ";" and recompiled. The error output is as the attachment [elog:335/1]. |
|
02 Feb 2007, Exaos Lee, Bug Fix, Problem solved by Re-define _syscall0(...)
|
OK, I searched and found that my kernel doesn't support "_syscall0" any more. So I patched the system.c as the following (from line 954):
[CODE]
|
|
06 Feb 2007, Stefan Ritt, Bug Fix, Problem solved by Re-define _syscall0(...)
|
[quote="Exaos Lee"]Maybe it's not the perfect way, but it works. :-)[/quote]
I changed it to:
|
|
30 Jan 2007, Stefan Ritt, Bug Report, Large files under Windows XP
|
Hello,
We have problems analyzing large files under Windows XP. For small file sizes,
|