Thank you, Stefan

Ruslan 



> > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > the attached file)
> 
> You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> 1970. By subtracting this from the current time, you get the running time.
> 
> > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > example when I start a new run, value of "Start time" key is automatically changed 
> > to "Fri Aug 21 12:38:36 2020" without time zone. 
> 
> "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> time zone involved there. The ASCII versions of the start/stop time are derived from 
> the binary time using the server's local time zone. If you want to display them in a 
> different time zone, you have to create a custom page and convert it to another time 
> zone using JavaScript like
> 
> var d = new Date(start_time_binary);
> 
> Stefan

 Thank you, Stefan

 >>>var d = new Date(start_time_binary);
 I need time zone because new Date() gives time related to time zone of my PC. 
 
 Ruslan 
> 
> 
> 
> > > 1. Is it possible to get "Running time" using, for example, jsonrpc? (please see 
> > > the attached file)
> > 
> > You have in the ODB "/Runinfo/Start time binary" which is measured in seconds since 
> > 1970. By subtracting this from the current time, you get the running time.
> > 
> > > 2. Is it possible to configure "Start time" and "Stop time" with time zone? For 
> > > example when I start a new run, value of "Start time" key is automatically changed 
> > > to "Fri Aug 21 12:38:36 2020" without time zone. 
> > 
> > "Start time binary" and "Stop time binary" are in seconds since the 1970 in UTC, so no 
> > time zone involved there. The ASCII versions of the start/stop time are derived from 
> > the binary time using the server's local time zone. If you want to display them in a 
> > different time zone, you have to create a custom page and convert it to another time 
> > zone using JavaScript like
> > 
> > var d = new Date(start_time_binary);
> > 
> > Stefan

Hello,

I got an error after start of run and it would be good to show this error (or 
errors) in UI that I am developing. I see this error in the Transition 
directory (please see the attached file). Is it possible to read the status 
message and error messages from the Transition directory using jsonrpc? If yes, 
could you please explain me how to do this.

Thank you.
Ruslan  

> The information you want is in the ODB:
> * "/System/Transition/status" is the overall integer status code.
> * "/System/Transition/error" is the overall error message string.
> 
> There is also per-client status information in the ODB:
> * "/System/Transition/Clients/<client_name>/status"
> * "/System/Transition/Clients/<client_name>/error"


Thank you so much, Ben!

> > > The information you want is in the ODB:
> > > * "/System/Transition/status" is the overall integer status code.
> > > * "/System/Transition/error" is the overall error message string.
> > > 
> > > There is also per-client status information in the ODB:
> > > * "/System/Transition/Clients/<client_name>/status"
> > > * "/System/Transition/Clients/<client_name>/error"
> 
> You can also use web page .../resources/transition.html as an example of how
> to read transition (and other) data from ODB into your own web page. example.html
> may also be helpful.
> 
> K.O.

Thank you Konstantin!

Ruslan

Hello,

I see this mhttpd error starting MSL-script: 
Uncaught (in promise) ReferenceError: m is not defined
at mhttpd_message (VM2848 mhttpd.js:2304)
at VM2848 mhttpd.js:2122

As I can see it does not affect work of MSL script but shows ReferenceError in 
Midas sequencer (see picture).

Could please point me how to fix this error?

Thanks.
Ruslan

I'm using midas to read data from a waveform digitizer at event rates of
10-30kHz. To accomplish this the digitizer is read via Block transfers and the
raw data put into a single MIDAS event.  Thus a MIDAS event could contain upto
250 physical events and at maximum 350kBytes.  In the analyzer modules I had
been analyzing the first physics event contained in a MIDAS event with no
problem.  Recently I tried to analyze all the physical events.  At low rates,
100hz-1khz, this was no problem, 1-5 physical events in a MIDAS event.  At
higher rates 10-20kHz, where there are about 40physical events per MIDAS event,
 the analyzer keeps up for a  few seconds then seg faults with " 'shared object
read from target memory' has disappear; keeping it symbols".  Any suggestions as
to why the analyzer is crashing would be very helpful.

Thanks,

Robert     

I've managed to put the analyzer into state where it cannot connect to the 
statistics database.  The error message suggests another analyzer is connected.  
I've recompiled MIDAS and the user code, restarted the computer etc..., and the 
analyzer cannot connect.  If I run "odbedit -c clean", I can start the analyzer, 
but get the same error when exiting or starting a run.  I've commented out all the
user code in the analyzer.c and its associated analyzer module's, and read event
code in the frontend and nothing resolves this issue.  Any suggestion?

The output from attempting to run the analyzer is:

Connect to experiment nnbarxwnr...[odb.c:1013:db_open_database,ERROR] Removed ODB
client 'Analyzer', index 0 because process pid 31982 does not exists
Deleted entry '/System/Clients/31982' for client 'Analyzer' because it is not
connected to ODB
OK
Root server listening on port 9090...
Loading previous online histos from ./data/last.root
ss_mutex_wait_for: pthread_mutex_lock() returned errno 22 (Invalid argument),
aborting...


When attempting to clean up the Analyzer tree in the ODB I receive the message
:"deletion of key not allowed."  

It appears that running the analyzer sets the permissions of the Statistics tree of
my analyzer module into RWDE.  

Adding the following lines to my start up script eliminate the above problem:
odbedit -c clean
odbedit -c "chmod 7 Analyzer/"
odbedit -c "rm /Analyzer/fADCs/Statistics"

Now when starting a run the analyzer crashes with this error:analyzer:
src/midas.c:11443: rpc_execute: Assertion `return_buffer' failed.
Aborted (core dumped)

and the messages in the odb are :

[system.c:4295:recv_tcp,ERROR] header: recv returned 0, n_received = 0, unexpected
connection closure
[midas.c:10042:rpc_client_call,ERROR] recv_tcp() failed, routine = "rc_transition",
host = "LANL-FADC-DAQ"
[midas.c:4130:cm_transition,ERROR] Could not start a run: cm_transition() status 503,
message 'Unknown error 503 from client 'Analyzer' on host LANL-FADC-DAQ'
Deleted entry '/System/Clients/1001' for client 'Analyzer' because process pid 1001
does not exists
[midas.c:8893:rpc_client_check,ERROR] Connection broken to "Analyzer" on host
LANL-FADC-DAQ
Run #180 start aborted
Error: Unknown error 503 from client 'Analyzer' on host LANL-FADC-DAQ

20:05:02 [Logger,INFO] Deleting previous file "./data/run00180.mid"

20:05:02 [ODBEdit,ERROR] [system.c:4295:recv_tcp,ERROR] header: recv returned 0,
n_received = 0, unexpected connection closure

20:05:02 [ODBEdit,ERROR] [midas.c:10042:rpc_client_call,ERROR] recv_tcp() failed,
routine = "rc_transition", host = "LANL-FADC-DAQ"

20:05:02 [ODBEdit,ERROR] [midas.c:4130:cm_transition,ERROR] Could not start a run:
cm_transition() status 503, message 'Unknown error 503 from client 'Analyzer' on host
LANL-FADC-DAQ'

20:05:02 [ODBEdit,INFO] Deleted entry '/System/Clients/1001' for client 'Analyzer'
because process pid 1001 does not exists

20:05:02 [ODBEdit,ERROR] [midas.c:8893:rpc_client_check,ERROR] Connection broken to
"Analyzer" on host LANL-FADC-DAQ

20:05:02 [ODBEdit,INFO] Run #180 start aborted
20:05:03 [mdump,INFO] Client 'Analyzer' on buffer 'SYSTEM' removed by cm_watchdog
because process pid 1001 does not exist
20:05:11 [mhttpd,INFO] Client 'Analyzer' (PID 1001) on database 'ODB' removed by
cm_watchdog (idle 10.1s,TO 10s)


Thanks,
Robert Pattie

Hi all,
  I've started receiving the following error that I can't track down.  Does
anyone have a suggestion for where to start looking for the cause of this?

[Analyzer,ERROR] [odb.c:9460:db_open_record,ERROR] struct size mismatch for "/"
(expected size: 576, size in ODB: 0)

This error prevents me from running two runs in a row.  I have to close the DAQ
and restart to take multiple runs.  Also it prevents me from running the analyzer
in offline mode. 

I also noticed that several for the ODB directories no longer have the same html
format when viewed through the browser.  I've attached a screen print of the
"/Logger/Channels" page.

Thanks,
Robert

I'm trying to set up an experiment with 2 frontends for the first time.  When I
start the remote frontend I get the following errors:

first time (odd attempt):

[MCS_Frontend_203,ERROR] [midas.c:9678:rpc_server_connect,ERROR] mserver
subprocess could not be started (check path)
[MCS_Frontend_203,ERROR] [mfe.c:2696:mainFE,ERROR] Cannot connect to experiment
'Default' on host 'ucntau-daq.lanl.gov', status 503

second time (even attempt):

MCS6A_frontend: src/midas.c:9085: rpc_client_dispatch: Assertion `n ==
sizeof(NET_COMMAND_HEADER) + 4 * sizeof(INT)' failed.

On the local host I'm running : mlogger, a frontend, an analzer, mhttp, and
mserver.  I followed the instructions for adding the remote computer to the
RPC_ALLOWED list and I do see that the remote frontend was able to edit the
local odb equipment list.  At present I'm not running an event builder I just
wanted to get the frontends connected to start.  Do I need to have the mserver
running on both computers?  Any suggestions on where to start troubleshooting this?

Thanks 

When building MIDAS on Fedora 17 64-bit, the default zlib 1.2.5 shared library
is linked to.  When recording data, the "/Logger/Channels/*/Statistics/Bytes
written" value does not get set correctly beyond the first few seconds of the
run.  Occasionally, it appears to not get set at all, and mlogger aborts the run.

Installing zlib 1.2.3 in static form to /usr/local/lib (the default location),
and changing the NEED_ZLIB section of the MIDAS Makefile to the following seems
to function as a workaround:

ifdef NEED_ZLIB
CFLAGS   += -DHAVE-ZLIB
LIBS     += /usr/local/lib/libz.a
endif

Several Fedora 17 libraries expect zlib 1.2.5 specifically, so it seems safest
to not replace the default zlib shared library.

Some extra details are that the VME CPU is an XVB602, and the most recent GE-IP
drivers are being used for VME communication.  Fedora 17 was chosen to avoid a
bug with the VGA output in Fedora 13-16.

I recently upgraded to MIDAS version midas-2019-06-b. I had to make a few changes 
to get our custom page running again, but am a little confused on starting and 
stopping runs. When I click on my "Start" button, it now redirects to a 
Transition page rather than reloading the status page. The standard MIDAS status 
page does the same. Could someone explain the reasoning for the current behavior?

Furthermore my "Stop" button is now broken with the following error:
Error: Invalid URL "CS/EngeRun&" or query "cmd=Stop&redir=EngeRun%26" or command 
"Stop"

I looked through the mhttpd.js code and managed to get the start button to load 
the status page, at least, but the stop button seems to be written differently. 
For example, start calls:
location.search = "cmd=Transition";
whereas stop does:
mhttpd_goto_page("Transition"); // DOES NOT RETURN

Can anyone offer any insights or advice? I can change the former to "cmd=Status", but 
the latter doesn't allow it.

All,

I am performing a fresh install of MIDAS on an Ubuntu linux box. I follow the 
usual installation procedure:

1) git clone https://bitbucket.org/tmidas/midas --recursive
2) cd midas
3) git checkout release/midas-2020-08
4) mkdir build
5) cd build
6) cmake ..
7) make

Step 3 warns me that 
"warning: unable to rmdir 'manalyzer': Directory not empty" and 
"warning: unable to rmdir 'midasio': Directory not empty"

Step 7 fails.
Compilation fails with an mhttp error related to mscb:
mhttpd.cxx:8224:59: error: too few arguments to function 'int mscb_ping(int, 
short unsigned int, int, int)'
 8224 |             status = mscb_ping(fd, (unsigned short) ind, 1);


I was able to get around this by rolling mscb back to some old version (commit 
74468dd), but am extremely nervous about mix-and-matching the code this way.

Any advice would be greatly appreciated.

Cheers,
Richard 

Thank you, Stefan.

I found these instructions under
1) The changelog: https://midas.triumf.ca/MidasWiki/index.php/Changelog#2020-12
2) Konstantin's elog announcements (e.g. https://midas.triumf.ca/elog/Midas/2089)

I do see reference to updating the submodules under the TRIUMF install 
instructions 
(https://midas.triumf.ca/MidasWiki/index.php/Setup_MIDAS_experiment_at_TRIUMF#Inst
all_MIDAS) although perhaps it can be clarified.

Cheers,
Richard

Indeed the ODB command "cleanup" really works. I have used it several
times with the TWIST DAQ and regularly with the BNMR/MUSR setups where
we have these stubborn clients (ie feepics) that do not want to shutdown
cleanly.  
But there is one problem with "cleanup". It has a hardwired timeout of
2 seconds.  This is a problem for tasks like lazylogger which set a timeout
of 60 seconds when moving the tape. So BEWARE, if you issue the "cleanup"
command, it might kill some clients who have setup their timeout to longer
than 2 seconds. 

I have asked Stefan to change this before. He said that, to be effective,
the timeout value used for "cleanup" has to be rather short. 
One possibility, would be to allow for a user entered "cleanup" timeout.
The default could stay at 2 seconds. 




> > Have you tried a "cleanup" in ODBEdit?
> 
> Nope. Will try next time...
> 

Jan , 

Do you need to log this stage 1 output?  If not, you would use the 
eventbuilder mechanism to create your stage 2 events.  
I use the eventbuilder mechanism with success for my TWIST experiment.

Renee

Information about the Event Builder statistics has been removed from the 
Status page in mhttpd.  I heard from Pierre that this information might 
be redundant when using the new Event Builder format??? 
For the TWIST experiment, we are running and cannot change on the fly
to a new format Event Builder.  It is very important for us to show the users
the rates and statistics coming out of the EventBuilder.  I had  to put this
piece of code back in mhttpd.  
Can I put it back in the distribution? or do I have to put a special TWIST flag? 
or do I have to keep reinserting this every time there is an update to mhttpd.c? 
At the moment, TWIST is generating a couple of updates/week to mhttpd.c

The following error has been reported to me by T2K colleagues:

When using  "odbedit -c "msg my_message", the following behavior 
has been observed depending on the length "n" of the message. 

1)  n < 100        All is well
2)  100 <= n < 245 Log not written but exit code = 0
3)  245 <= n < 280 Error: "Experiment not defined" and exit code = 1
4)  280 <= n       Error: "Cannot connect to remote host" and exit code = 1

Also, when logging from compiled C code - when messages reach some magic length
the MIDAS client sending them segfaults.

Please fix