("0" + leftDate.getUTCMonth() + 1).slice(-2)

("0" + (leftDate.getUTCMonth() + 1)).slice(-2)

I don't see any bad side effects at the moment, so I accepted the changes and committed them.

Stefan

> I noticed that a check was added to mfe.cxx in 1961af0d6:
> 
> +      /* check for consistent common settings */
> +      if ((eq_info->read_on & RO_STOPPED) &&
> +          (eq_info->eq_type == EQ_POLLED ||
> +           eq_info->eq_type == EQ_INTERRUPT ||
> +           eq_info->eq_type == EQ_MULTITHREAD ||
> +           eq_info->eq_type == EQ_USER)) {
> +         cm_msg(MERROR, "register_equipment", "Events \"%s\" cannot be read when run is stopped (RO_STOPPED flag)", equipment[idx].name);
> +         return 0;
> +      }
> 
> 
> Can someone explain the purpose of this check and error message? Perhaps it
> was put in place with only DAQ FEs, not SC FEs in mind? And should the 
> documentation in the wiki actually be "s/Before stopping run/While run is stopped/"?

Indeed you have two types of events handled by mfe.cxx: Slow control events (EQ_SLOW or EQ_PRIODIC) and triggered events (EQ_POLLED or 
EQ_INTERRUPT or EQ_MULTITHREAD or EQ_USER). For slow control events it can make sense to read them also when the run is stopped, that's why you 
can specify RO_STOPPED or RO_ALWAYS. This does however not make sense for triggered events. Reading triggered events when the run is stopped 
invalidates the concept of runs (= read triggered events only during a run). We had cases where people mixed this up, so the warning was added. 
If you have a slow control event you want to read when the run is stopped, make sure it is of type EQ_SLOW or EQ_PERIODIC.

Stefan

I fixed that and committed the change to megon02, just reload your browser. I also set ymin and ymax of the Vacuum plot to meaningful 
values (not to zero!).

Stefan

Using the mouse to click and drag on a logarithmic y axis triggers a zooming behaviour as if the user zoomed in on a linear axis. 

How to reproduce:
Take a plot that ranges from 1e-20 to 100, for example. Click around the middle of the axis and drag the mouse up to about 3/4.

Expected result:
Limit the y axis to the approximate range 1e-10 to 1e-4

Actual result:
The y axis limits are around 50 and 75.


P.S. Is there a way to configure the history plot in a way that values of 0.00 are ignored rather than showing up as 1e-20?

/usr/include/string.h:506:15: error: declaration of ‘size_t strlcpy(char*, const char*, size_t) noexcept’ has a 
different exception specifier
  506 | extern size_t strlcpy (char *__restrict __dest,
      |               ^~~~~~~
In file included from /home/luk/midas/src/midas.cxx:14:
/home/luk/midas/include/midas.h:2190:17: note: from previous declaration ‘size_t strlcpy(char*, const 
char*, size_t)’

#if (__GLIBC__ > 2) || (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 38)
#ifndef HAVE_STRLCPY
#define HAVE_STRLCPY 1
#endif
#endif

This is a super small pull request, simple replace deprecated sprintf with snprintf

https://bitbucket.org/tmidas/manalyzer/pull-requests/9

> Hi all, I hope this is the right place to post two pull requests, if not, please let me know where I should be submitting them
> 
> Both are fairly small changes, please see them listed below (more details written on the PRs themselves)
> 
> 
> - Enable ROOT's thread safety when running in multithreaded mode
> 
> This helps avoid users having to write their call to a global thread lock when calling ->Fill() on ROOT histograms and Trees
> https://bitbucket.org/tmidas/manalyzer/pull-requests/5
> 
> 
> - Add command argument to specify an IP of the root HTTP server to bind to
> 
> This was a problem I painted around when at ALPHA (quickly hardcoding the right external IP address into the local build. Obviously a bad habit)
> https://bitbucket.org/tmidas/manalyzer/pull-requests/6

Further to the pull manalyzer pull requests, I have another feature I would like to add. Took a little longer to test than planned... here I present an effort to use smart pointers to manage the lifetime of TMEvents and TAFlow.

I will be interested to discuss the implications of this pull request (its possible to return to previous 'raw' pointers via a cmake toggle)

https://bitbucket.org/tmidas/manalyzer/pull-requests/8

Hello Nick,
I am using the most updated tag: midas-2022-05-c-1284-g4a77127b.

Here would be some of the examples of the error listed:
/usr/bin/ld: /packages/midas/lib/mfe.o: in function
/usr/bin/ld: /packages/midas/src/mfe.cxx:2537: undefined reference to `event_buffer_size'
...
Also several undefined reference. Any idea about it? Thank you.

Best,
Terry


> I think this may only be an issue on the development branch.
> Can you confirm that that is what you are using?
> 
> If so, I suggest you try the most recent stable tag 2022-05-c.
> 
> > Dear experts,
> > I am a new user of MIDAS. I try to follow the instruction from 
> > https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
> > to install MIDAS in Fedora 39.
> > 
> > When I try to have a try in the section of "Clients run on Localhost only"
> > https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#Clients_run_on_Localhost_only
> > 
> > I get the error of "undefined reference to" several variables in the mfe.cxx. For example the variable "max_event_size_frag". May I know any idea about this issue? Thank you.
> > 
> > 
> > Best,
> > Terry

I just discovered https://bitbucket.org/tmidas/midas/issues/338/mfec-ro_stopped-is-now-forbidden

> Dear Midas experts,
> 
> I noticed that a check was added to mfe.cxx in 1961af0d6:
> 
> +      /* check for consistent common settings */
> +      if ((eq_info->read_on & RO_STOPPED) &&
> +          (eq_info->eq_type == EQ_POLLED ||
> +           eq_info->eq_type == EQ_INTERRUPT ||
> +           eq_info->eq_type == EQ_MULTITHREAD ||
> +           eq_info->eq_type == EQ_USER)) {
> +         cm_msg(MERROR, "register_equipment", "Events \"%s\" cannot be read when run is stopped (RO_STOPPED flag)", equipment[idx].name);
> +         return 0;
> +      }
> 
> This commit was by Stefan in May 2022.
> 
> A commit few days later, 28d9c96bd, removed the "return 0;", and updated the
> error message to:
> 
> "Equipment \"%s\" contains RO_STOPPED or RO_ALWAYS. This can lead to undesired side-effect and should be removed."
> 
> So such FEs can run but there is still an error at start up. The 
> documentation at https://daq00.triumf.ca/MidasWiki/index.php/ReadOn_Flags
> states with RO_STOPPED "Readout Occurs" "Before stopping run".
> Which seems to indicate that the removing the RO_STOPPED bit from a SC FE
> would just result in an additional read not happening just prior to a run
> stop. However reading scheduler() in mfe.cxx I see in the the main loop:
> 
>  if (run_state == STATE_STOPPED && (eq_info->read_on & RO_STOPPED) == 0) 
>     continue;
> 
> So it seems to me that the a EQ_PERIODIC equipment needs RO_STOPPED to be set
> otherwise it will not read out data while there is no DAQ run.
> 
> Can someone explain the purpose of this check and error message? Perhaps it
> was put in place with only DAQ FEs, not SC FEs in mind? And should the 
> documentation in the wiki actually be "s/Before stopping run/While run is stopped/"?
> 
> Thanks,
> 
> Nick.

Dear all, 

this posting results from the Fermilab move to a new packaging/build system called spack 
which doesn't allow to use the MIDAS install procedure described at

https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#MIDAS_Package_Installation

as is. Spack specifics aside, building MIDAS under spack took  
a) adding cmake install for three directories: drivers, resources, and python/midas, 
b) adding one more include file - include/tinyexpr.h - to the list of includes installed by cmake.

With those changes I was able to point MIDASSYS to the spack install area and successfully run mhttpd, 
build experiment-specific C++ frontends and drivers, use experiment-specific python frontends etc. 
I'm not using anything from MIDAS submodules though.

I'm wondering what the experts would think about accepting the changes above to the main tree. 

Installation procedures and changed to cmake files are always a sensitive area with a lot of boundary 
constraints coming from the existing use patterns, and even a minor change could have unexpected consequences
So I wouldn't be surprised if the fairly minor changes outlined above had side effects.

The patch file is attached for consideration.

-- regards, Pasha

I think this may only be an issue on the development branch.
Can you confirm that that is what you are using?

If so, I suggest you try the most recent stable tag 2022-05-c.

> Dear experts,
> I am a new user of MIDAS. I try to follow the instruction from 
> https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
> to install MIDAS in Fedora 39.
> 
> When I try to have a try in the section of "Clients run on Localhost only"
> https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#Clients_run_on_Localhost_only
> 
> I get the error of "undefined reference to" several variables in the mfe.cxx. For example the variable "max_event_size_frag". May I know any idea about this issue? Thank you.
> 
> 
> Best,
> Terry

Dear Midas experts,

I noticed that a check was added to mfe.cxx in 1961af0d6:

+      /* check for consistent common settings */
+      if ((eq_info->read_on & RO_STOPPED) &&
+          (eq_info->eq_type == EQ_POLLED ||
+           eq_info->eq_type == EQ_INTERRUPT ||
+           eq_info->eq_type == EQ_MULTITHREAD ||
+           eq_info->eq_type == EQ_USER)) {
+         cm_msg(MERROR, "register_equipment", "Events \"%s\" cannot be read when run is stopped (RO_STOPPED flag)", equipment[idx].name);
+         return 0;
+      }

This commit was by Stefan in May 2022.

A commit few days later, 28d9c96bd, removed the "return 0;", and updated the
error message to:

"Equipment \"%s\" contains RO_STOPPED or RO_ALWAYS. This can lead to undesired side-effect and should be removed."

So such FEs can run but there is still an error at start up. The 
documentation at https://daq00.triumf.ca/MidasWiki/index.php/ReadOn_Flags
states with RO_STOPPED "Readout Occurs" "Before stopping run".
Which seems to indicate that the removing the RO_STOPPED bit from a SC FE
would just result in an additional read not happening just prior to a run
stop. However reading scheduler() in mfe.cxx I see in the the main loop:

 if (run_state == STATE_STOPPED && (eq_info->read_on & RO_STOPPED) == 0) 
    continue;

So it seems to me that the a EQ_PERIODIC equipment needs RO_STOPPED to be set
otherwise it will not read out data while there is no DAQ run.

Can someone explain the purpose of this check and error message? Perhaps it
was put in place with only DAQ FEs, not SC FEs in mind? And should the 
documentation in the wiki actually be "s/Before stopping run/While run is stopped/"?

Thanks,

Nick.

Dear experts,
I am a new user of MIDAS. I try to follow the instruction from 
https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux
to install MIDAS in Fedora 39.

When I try to have a try in the section of "Clients run on Localhost only"
https://daq00.triumf.ca/MidasWiki/index.php/Quickstart_Linux#Clients_run_on_Localhost_only

I get the error of "undefined reference to" several variables in the mfe.cxx. For example the variable "max_event_size_frag". May I know any idea about this issue? Thank you.


Best,
Terry

Hi all, I hope this is the right place to post two pull requests, if not, please let me know where I should be submitting them

Both are fairly small changes, please see them listed below (more details written on the PRs themselves)


- Enable ROOT's thread safety when running in multithreaded mode

This helps avoid users having to write their call to a global thread lock when calling ->Fill() on ROOT histograms and Trees
https://bitbucket.org/tmidas/manalyzer/pull-requests/5


- Add command argument to specify an IP of the root HTTP server to bind to

This was a problem I painted around when at ALPHA (quickly hardcoding the right external IP address into the local build. Obviously a bad habit)
https://bitbucket.org/tmidas/manalyzer/pull-requests/6

> MIDAS RPC data format.
> 3) RPC reply
> 3.1) header:
> 3.2) followed by data for RPC_OUT parameters:
> 
> data sizes and encodings are the same as for RPC_IN parameters.

Correction:

RPC_VARARRAY data encoding for data returned by RPC is different from data sent to RPC:

4 bytes of arg_size (before 8-byte alignement), (for data sent to RPC, it's 4 bytes of param_size, after 8-byte alignment)
4 bytes of padding
param_size of data

K.O.

P.S. bug/discrepancy caught by GCC/LLVM address sanitizer.

This is moving slowly. I now have RPC caller side support for std::string and 
std::vector<char>. RPC server side is next. K.O.

Ubuntu 22 has almost everything necessary to cross-build arm64 MIDAS frontends:

# apt install g++-12-aarch64-linux-gnu gcc-12-aarch64-linux-gnu-base libstdc++-12-dev-arm64-cross
$ aarch64-linux-gnu-gcc-12 -o ttcp.aarch64 ttcp.c -static

to cross-build MIDAS:

make arm64_remoteonly -j

run programs from $MIDASSYS/linux-arm64-remoteonly/bin
link frontends to libraries in $MIDASSYS/linux-arm64-remoteonly/lib

Ubuntu 22 do not provide an arm64 libz.a, as a workaround, I build a fake one. (we do not have HAVE_ZLIB anymore...). or you 
can link to libz.a from your arm64 linux image, assuming include/zlib.h are compatible.

K.O.