> > 
> > Do you mind giving little more detail? We might have the same issue, where we got
> > complaints that midas history stops working after a certain time.
> > 
> 
> 
> Yes, please do supply more information. What problems do *you* see?
> 
> 
> K.O.

Hi.

uhm, mine might be completely unrelated to this, but it just so happened that the rev.
4936 was one that was used in a recent experiment, in which there was complaints about
the responsiveness of the history plots. The history plots would take up to 30 seconds
to respond, if the run was about 30-40 minutes old. When the run is about  < 10 minutes
old , the history plot was responsive to within 1-2 seconds.

I received rather limited information regarding this problem. So hence my apprehension
on stating it as a *problem* or bug. It could be something related to hardware/beam etc.

Lee

> For our MIDAS installation at Fermilab, it is necessary that we be able to write to a PosgresQL 
> database (MySQL is not supported here). This will be required of both mlogger and mscb. 
> 
> Has anyone done this before? And do you know of a relatively simple way of implementing it, or do 
> we need to replicate the mysql functions that are already in the mlogger/mscb code to add functions 
> that perform the equivalent Posgres commands?
> 
> Thanks!
> Wes

Hi Wes

I did this a few years ago, and replicated the mysql functions within mlogger. 

Lee

Hi

> On one side, such checksums help me confirm that uncompressed data contents is the same as original 
> data (compression/decompression is okey).
> 

> I can write the computed checksums into midas.log, or into runNNN.crc32, runNNN.sha256, etc files. (or 
> both).
> 

Just a thought on my side. I have been using a checksum, on data produced  by our experiments via mlogger, the runxxxx.mid.gz, in 
the same manner you proposed and I see now implemented. 

I have a slight, objection, if I may call it that, to how the checksum is saved to disk, in 
run00007.mid.gz.sha256 as an example.


$ cat ~/Data/run00007.mid.gz.sha256
f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee 650597 Data/run00007.mid.gz


It seems a little misleading to have the gzip'd filename paired with the checksum of the uncompressed content.

May I suggest that the pairing should be ,

f315af7caf6ca204cc082132862cb4227d77066cb60c6e2b1039d6dc5b04d1ee  run00007.mid as an example.

As I find, this information will sit in an archive, database in my case for a long period, and it might
be confusing later on, when verification of the checksum is required.

Hi,

So I finally got around to "publish" work I did in 2009/2010 with RTEMS.

The work was mainly between myself and Till Straumann (SLAC), and Dr. Joel 
Sherill, to get VME support for vme universe/vme tsi148 ( basic support ), into 
the i386 bsp.

https://bitbucket.org/lcpool2/midas-k600/src/develop/ ( our rtems port ).


What this did was to allow us to run our various VME single board controllers, 
with a single frontend application.

It is still classified testing but its been very successful, so
far, and I hope to use it in the next experiment, if possible.

The midas port, contains a makefile, and some changes to the 
midas.c/system.c/mfe.c files. I've not tested  the full functionality
as I'm super time limited.

Hope this is help full to others...

> We're using the History Logger MIDAS feature and writing to mySQL tables, but 
> in some cases have run into issues installing mySQL on centos7 systems.
> 
> Has anyone ever tried running this MIDAS feature with MariaDB rather than 
> mySQL?

Hi

I've used MIDAS Logger feature with MariaDB and had no issue thus far .

Hi,

Thank you, commenting out the line worked and we can now compile the code. However, when we try to run ana.exe or anaDisplay.exe, we get the following errors:

Error in <TCling::RegisterModule>: cannot find dictionary module TMainDisplayWindowDict_rdict.pcm
Error in <TCling::RegisterModule>: cannot find dictionary module TRootanaDisplayDict_rdict.pcm
Error in <TCling::RegisterModule>: cannot find dictionary module TFancyHistogramCanvasDict_rdict.pcm
 

We see that the files are in /rootana/obj but we cannot find a way to point the compiler to them.

Could you please advise how to proceed,

Many thanks

> Hi Paolo,
> 
> Sorry for the slow response.  We were discussing this with Konstantin yesterday.  He is aware of the problem now and will be working on a solution soon.
> 
> In the short term I found that it works if you just comment out the offending line:
> 
> indnerlt:rootana lindner$ git diff libMidasInterface/TMidasOnline.cxx
> diff --git a/libMidasInterface/TMidasOnline.cxx b/libMidasInterface/TMidasOnline.cxx
> index 92eb3e9..67da613 100644
> --- a/libMidasInterface/TMidasOnline.cxx
> +++ b/libMidasInterface/TMidasOnline.cxx
> @@ -191,7 +191,7 @@ bool TMidasOnline::sleep(int mdelay)
>    #ifdef CH_IPC
>    ss_suspend_set_dispatch(CH_IPC, 0, NULL);
>    #else
> -  ss_suspend_set_dispatch_ipc(NULL);
> +  //  ss_suspend_set_dispatch_ipc(NULL);
>    #endif
>   int status = ss_suspend(mdelay, 0);
>    if (status == SS_SUCCESS)
> 
> This compiles and at least runs for me; so maybe that is helpful for you.  But Konstantin will provide a longer term solution.
> 
> 
> 
> > Hi,
> > 
> > I posted on the ROOTANA elog but there seems to be little activity there...
> > 
> > Could someone confirm if this is a bug?
> > https://midas.triumf.ca/elog/Rootana/14
> > 
> > Another user replied that they are encountering the same issue, so I think it is unlikely it is just our installation.
> > 
> > While ROOTANA is unusable for us, I tried to use the example Frontend and Analyzer (under the Experiment source folder). The analyzer does not seem to do much though. A root file is produced but nothing is placed into it. Is that normal?
> > 
> > Any help would be welcome.

I was planning to use the alarm system to display an information banner when a
certain valve is open, but I would like it to go away again when the valve is
closed.
Is there a way to achieve that? Maybe reset the alarm from an alarm script?
(Seems like a hack...)
Maybe this could be a useful feature, to be able to define an alarm class that
resets itself once the condition is no longer met?

I ported a bunch of frontends to C++ and now I'm occasionally getting this RPC 
error message:

http error: readyState: 4, HTTP status: 502 (Proxy Error), batch request: method: 
"db_get_values", params: [object Object], id: 1583456958869 method: "get_alarms", 
params: null, id: 1583456958869 method: "cm_msg_retrieve", params: [object 
Object], id: 1583456958869 method: "cm_msg_retrieve", params: [object Object], 
id: 1583456958869

I'm assuming I'm doing wrong something somewhere, but does this message contain 
information where to look? Does the ID mean something?

I am on branch develop and use the tmfe frontends. I found that a bool vector 
gets bigger every time I read it from the ODB.

Turns out in midasodb.cxx (as of commit 813f696, lines 478ff) the output vector 
"value" gets appended to without resizing.

Since after line 474 xvalue.size()==value.size() it would make sense to simply 
replace value->push_back() with value[i]= .

The most recent commit (b43aef648c2f8a7e710a327d0b322751ae44afea) throws this 
compiler error:
src/tmfe_main.cxx:39:11: error: 'SIGPIPE' was not declared in this scope
    signal(SIGPIPE, SIG_IGN);

It's fixed by adding #include <signal.h> to that file.

Am I right in thinking that the TMFE HandlePoll function is calle once per 
PollMidas()? And what is the difference to HandleRead()?

> BTW, for production use I recommend midas from the "release" branches, unless one 
> needs a bug fix or new feature from the development branch.

Fair point. I would suggest adding that recommendation to the wiki instructions. I 
forget to add that step otherwise.

Version: release/midas-2020-12

I'm exporting the history data shown in elog:2132/1 to CSV, but when I look at the 
CSV data, the step no longer occurs at the same time in both data sets (elog:2132/2)

History is from two separate equipments/frontends, but both have "Log history" set to 1.

Tried with export of two different time ranges, and the shift appears to remain the same, 
about 4040 rows.

I think from my perspective the separate files are fine. I personally don't really like the format 
with the gaps, so don't see an advantage in putting in the extra work.
I'm surprised the shift is this big, though, it was more than a whole hour in my case, is it the 
time difference between when the frontends were started?

Version: release/midas-2020-12

In the new history display, the checkbox "Change all time axes together" works 
well with the mouse-based zoom, but does not apply to the +- buttons.

The new history as well as the clock in the web page header show the local time 
of the user's computer running the browser.
Would it be possible to make it either always use the time zone of the Midas 
server, or make it selectable from the config page?
It's not ideal trying to relate error messages from the midas.log to history 
plots if the time stamps don't match.

The documentation fro the Elog ODB tree here:
https://midas.triumf.ca/MidasWiki/index.php//Elog_ODB_tree#Url

says:

The Built-in elog will ignore this key.

If using an Built-in Elog, this key must NOT be present.

I assume this is an artifact from amending the documentation, but it's unclear if 
the key has to be removed or not. I.e. if the key exists and is empty, will the 
built-in elog work? In what way will it break?

The documentation for the sequencer loop says:

<quote>
LOOP [name ,] n ... ENDLOOP	To execute a loop n times. For infinite loops, "infinite" 
can be specified as n. Optionally, the loop variable running from 0...(n-1) can be accessed 
inside the loop via $name.
</quote>

In fact the loop variable runs from 1...n, as can be seen by running this exciting 
sequencer code:

1 COMMENT "Figuring out MSL"
2 
3 LOOP n,4
4   MESSAGE $n,1
5 ENDLOOP