07 Jun 2007, Konstantin Olchanski, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
Running MIDAS at CERN is proving more challenging than I expected. The network environement is not
as benign as I am used to (i.e. at TRIUMF) and our machines are being constantly probed by something/
somebody.
|
07 Jun 2007, John M O'Donnell, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
I am in favor of tcp_wrappers.
tcp_wrappers is well understood.
|
08 Jun 2007, Stefan Ritt, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
First I have a general question: mserver is started through xinetd, and xinetd has
the options "only_from" and "no_access". This is equivalent to the tcp_wrapper
functionality. Why not using this? It's possible without changing anything in midas.
|
07 Mar 2008, Konstantin Olchanski, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
The mhttpd host-based access control list as used by ALPHA at CERN is now committed to
SVN (revision 4135).
|
10 Mar 2008, Stefan Ritt, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
> When accepting connection from a remote host, the remote IP address is converted to a
> hostname using gethostbyaddr(). If ODB directory "/experiment/security/mhttpd hosts",
> exists, access is permitted if there is an entry for the this hostname. "localhost" is
|
10 Mar 2008, Konstantin Olchanski, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
> While your "positive list" will certainly work, it is much more inflexible than a more
> general hosts.allow/hosts.deny with wildcards. Assume some experiment decides it wants to
> be controlled from all inside CERN. With hosts.allow/deny you could do
|
10 Mar 2008, Stefan Ritt, Suggestion, RFC- ACLs for midas rpc, mserver, mhttpd access
|
> I was going to bring this up later, but since mhttpd does not pass security audits, I believe
> the only way it should be run in the modern computing environement is behind
> a password-protected SSL proxy.
|
26 Apr 2020, Yu Chen (SYSU), Forum, Questions and discussions on the Frontend ODB tree structure.
|
Dear MIDAS developers and colleagues,
This is Yu CHEN of School of Physics, Sun Yat-sen University, China, working in the PandaX-III collaboration, an experiment under development to search |
26 Apr 2020, Stefan Ritt, Forum, Questions and discussions on the Frontend ODB tree structure.
|
Dear Yu Chen,
in my opinion, you can follow two strategies:
|
18 May 2009, Exaos Lee, Suggestion, Question about using mvmestd.h
|
The "mvmestd.h" uses the following function to open a VME device:
[CODE]int mvme_open(MVME_INTERFACE **vme, int idx)[/CODE]
I found that the "driver/vme/sis3100/sis3100.c" uses the implementation as:
|
18 May 2009, Stefan Ritt, Suggestion, Question about using mvmestd.h
|
[quote="Exaos Lee"]The "mvmestd.h" uses the following function to open a VME device:
[CODE]int mvme_open(MVME_INTERFACE **vme, int idx)[/CODE]
I found that the "driver/vme/sis3100/sis3100.c" uses the implementation as:
|
19 May 2009, Konstantin Olchanski, Suggestion, Question about using mvmestd.h
|
> The problem is: I renamed my SIS1100 devices as /dev/sis1100/xxxxx. So I have to hack the
"sis3100.c".
|
20 May 2009, Exaos Lee, Suggestion, Question about using mvmestd.h
|
> > The problem is: I renamed my SIS1100 devices as /dev/sis1100/xxxxx. So I have to hack the
> "sis3100.c".
>
|
21 Jul 2018, Hiroaki Natori, Forum, Question about distributing event builder function on remote PC
|
Dear expert,
I'm going to develop MIDAS DAQ for COMET experiment.
|
23 Jul 2018, Konstantin Olchanski, Forum, Question about distributing event builder function on remote PC
|
> I'm going to develop MIDAS DAQ for COMET experiment.
> I'm thinking to distribute the load of event building to different PCs.
> I attach a schematics of one of the examples of the design.
|
28 Jul 2018, Hiroaki Natori, Forum, Question about distributing event builder function on remote PC
|
Dear Mr. Olchanski
Thank you for your comment.
|
26 Jan 2009, Derek Escontrias, Forum, Question - ODB access from a custom page
|
Hi, I am looking for a way to mutate ODB values from a custom page. I have been
using the edit attribute for the 'odb' tag, but for some things it would be nice
if a form can handle the change. I have seen references to ODBSet on the forums,
|
27 Jan 2009, Suzannah Daviel, Forum, Question - ODB access from a custom page
|
At present the only documentation on the Javascript library is in this elog
e.g. Message 496 31 Jul 08
|
03 Oct 2023, Gennaro Tortone, Bug Report, Python midas.file_reader get_eor_odb_dump()
|
Hi,
|
16 Oct 2023, Ben Smith, Bug Report, Python midas.file_reader get_eor_odb_dump()
|
Thanks for the bug report Gennaro!
I've fixed the code so that we'll now find the end-of-run ODB dump even if the user is already at the end of the file when they call get_eor_odb_dump().
|