Back Midas Rome Roody Rootana
  Rome Analyzer Framework, Page 10 of 11  Not logged in ELOG logo
ID Datedown Author Topic Subject
  31   06 Jan 2005 Ryu SawadaSuggestionuser defined link in html file
I was asked to put change log of my rome application(LPframewok). I think the best place to put it is the 
html file which builder created.  But of course to modify it is not good, because it will be overwritten by 
builder again.

So, I want to propose to allow user to add links in the html file with the way like followings.

(i) User defines links.
------   in LPframewok.xml   ------
<DocumentLinks>
	<DocumentLink>
		<Href>html/changelog.html</Href>
		<Text>Change log</Text>
	</DocumentLink>
</DocumentLinks>
-----------------------------------

(ii)And html files looks like
-----------------------------------
Table of Contents

  • Introduction
  • Objects in the LPframework
      ? Tasks
      ? Folders
      ? Trees
      ? Midas Banks
  • Access Methods to Objects in the LPframework
      ? Folders
      ? Data Base
      ? Steering Parameters
      ? Histograms
      ? Midas Banks
      ? General
  • Class Overview
  • Links
      ? Change log
-----------------------------------

(iii)Users must write the target(html/changelog.html).
  30   04 Jan 2005 Matthias SchneebeliBug ReportMultiple TTree writing
> When I make two TTree's write flag true. Both TTrees is written in one file. And the other file is empty.
> 
> I added some lines to fix it in ROMEEventLoop.cpp
> 
> -------
> This is other topic.
> Probably, to close TFile after each run is good. 
> Because, when program runs for several run, 
>  even if program aborts after some runs, files of former runs are safe.
> 
> 
> 
> -------
>   941    // Write non accumulative output tree files
>     942    ROMEString filename;
>     943    ROMETree *romeTree;
>     944    TTree *tree;
>     945    TFile *fTreeFile;
>     946    ROMEString runNumberString;
>     947    gROME->GetCurrentRunNumberString(runNumberString);
>     948    for (int j=0;j<gROME->GetTreeObjectEntries();j++) {
>     949       romeTree = gROME->GetTreeObjectAt(j);
>     950       fTreeFile = fTreeFiles[j];
>     951       if (romeTree->isWrite() && !gROME->isTreeAccumulation()) {
>     952          tree = romeTree->GetTree();
>     953          cout << "Writing Root-File " << tree->GetName() << runNumberString.Data() << ".root" 
> << endl;
>     954          fTreeFile->cd();
>     955          tree->Write("",TObject::kOverwrite);
>     956       }
>     957    }
>     958    cout << endl;



Thanks
  29   01 Jan 2005 Ryu SawadaBug ReportMultiple TTree writing
When I make two TTree's write flag true. Both TTrees is written in one file. And the other file is empty.

I added some lines to fix it in ROMEEventLoop.cpp

-------
This is other topic.
Probably, to close TFile after each run is good. 
Because, when program runs for several run, 
 even if program aborts after some runs, files of former runs are safe.



-------
  941    // Write non accumulative output tree files
    942    ROMEString filename;
    943    ROMETree *romeTree;
    944    TTree *tree;
    945    TFile *fTreeFile;
    946    ROMEString runNumberString;
    947    gROME->GetCurrentRunNumberString(runNumberString);
    948    for (int j=0;j<gROME->GetTreeObjectEntries();j++) {
    949       romeTree = gROME->GetTreeObjectAt(j);
    950       fTreeFile = fTreeFiles[j];
    951       if (romeTree->isWrite() && !gROME->isTreeAccumulation()) {
    952          tree = romeTree->GetTree();
    953          cout << "Writing Root-File " << tree->GetName() << runNumberString.Data() << ".root" 
<< endl;
    954          fTreeFile->cd();
    955          tree->Write("",TObject::kOverwrite);
    956       }
    957    }
    958    cout << endl;
  28   21 Dec 2004 Matthias SchneebeliBug Report-e option
> When I used "-e" option in generated framework. It stopped immediately after starting analysis.
> 
> When I commented out following two lines in ROMEEventLoop.cpp. It worked.
> 
>   // check event numbers
>       int status = gROME->CheckEventNumber(event);
>       if (status==0) {
> //	this->SetContinue();
> //	return true;
>       }

the syntax is : -e 100-200,205,300-400
  27   21 Dec 2004 Matthias SchneebeliBug ReportReadConfiguration
> I can not change some global steering parameters.
> In my LPConfig::ReadConfiguration in LPConfig.cpp which was generated by builder.
> 
> There is a line like
>  xml->GetPathValue(path+"/GlobalSteeringParameters/child::SteeringParameterGroup[child::
> SPGroupName='Switch']/child::SteeringParameterGroup[child::SPGroupName='RunMode']/child::
> SteeringParameterField[child::SPName='Pedestal']/SPValue",fConfigData[index]->fGlobalSteering-
> >fRunMode->fPedestal,"");
> 
> but it should be
>  xml->GetPathValue(path+"/GlobalSteeringParameters/child::SteeringParameterGroup[child::
> SPGroupName='RunMode']/child::SteeringParameterField[child::SPName='Pedestal']/
> SPValue",fConfigData[index]->fGlobalSteering->fRunMode->fPedestal,"");
> 
> 
> ****
> one small other bug.
> when I start my framework with -h option, rome shows
>   -i       Configuration file (default ROMEConfig.xml)
> but default is romeConfig.xml
> ***
> 
>         <GlobalSteeringParameters>
>                 <SteeringParameterGroup>
>                         <SPGroupName>Switch</SPGroupName>
>                              <SteeringParameterField>
>                                 <SPFieldName>ADC1</SPFieldName>
>                                 <SPFieldType>Bool_t</SPFieldType>
>                                 <SPFieldInitialization>1</SPFieldInitialization>                                
>                         </SteeringParameterField>
>                         <SteeringParameterField>
>                                 <SPFieldName>WriteDataBase</SPFieldName>
>                                 <SPFieldType>Bool_t</SPFieldType>
>                                 <SPFieldInitialization>0</SPFieldInitialization>                                
>                         </SteeringParameterField>
>                 </SteeringParameterGroup>
>                 <SteeringParameterGroup>
>                         <SPGroupName>RunMode</SPGroupName>
>                         <SteeringParameterField>
>                                 <SPFieldName>Pedestal</SPFieldName>
>                                 <SPFieldType>Short_t</SPFieldType>
>                                 <SPFieldInitialization>0</SPFieldInitialization>                                
>                         </SteeringParameterField>
>                         <SteeringParameterField>
>                                 <SPFieldName>Normal</SPFieldName>
>                                 <SPFieldType>Short_t</SPFieldType>
>                                 <SPFieldInitialization>1</SPFieldInitialization>                                
>                         </SteeringParameterField>
>                 </SteeringParameterGroup>
>         </GlobalSteeringParameters>

done
  26   06 Dec 2004 Ryu SawadaBug ReportReadConfiguration
I can not change some global steering parameters.
In my LPConfig::ReadConfiguration in LPConfig.cpp which was generated by builder.

There is a line like
 xml->GetPathValue(path+"/GlobalSteeringParameters/child::SteeringParameterGroup[child::
SPGroupName='Switch']/child::SteeringParameterGroup[child::SPGroupName='RunMode']/child::
SteeringParameterField[child::SPName='Pedestal']/SPValue",fConfigData[index]->fGlobalSteering-
>fRunMode->fPedestal,"");

but it should be
 xml->GetPathValue(path+"/GlobalSteeringParameters/child::SteeringParameterGroup[child::
SPGroupName='RunMode']/child::SteeringParameterField[child::SPName='Pedestal']/
SPValue",fConfigData[index]->fGlobalSteering->fRunMode->fPedestal,"");


****
one small other bug.
when I start my framework with -h option, rome shows
  -i       Configuration file (default ROMEConfig.xml)
but default is romeConfig.xml
***

        <GlobalSteeringParameters>
                <SteeringParameterGroup>
                        <SPGroupName>Switch</SPGroupName>
                             <SteeringParameterField>
                                <SPFieldName>ADC1</SPFieldName>
                                <SPFieldType>Bool_t</SPFieldType>
                                <SPFieldInitialization>1</SPFieldInitialization>                                
                        </SteeringParameterField>
                        <SteeringParameterField>
                                <SPFieldName>WriteDataBase</SPFieldName>
                                <SPFieldType>Bool_t</SPFieldType>
                                <SPFieldInitialization>0</SPFieldInitialization>                                
                        </SteeringParameterField>
                </SteeringParameterGroup>
                <SteeringParameterGroup>
                        <SPGroupName>RunMode</SPGroupName>
                        <SteeringParameterField>
                                <SPFieldName>Pedestal</SPFieldName>
                                <SPFieldType>Short_t</SPFieldType>
                                <SPFieldInitialization>0</SPFieldInitialization>                                
                        </SteeringParameterField>
                        <SteeringParameterField>
                                <SPFieldName>Normal</SPFieldName>
                                <SPFieldType>Short_t</SPFieldType>
                                <SPFieldInitialization>1</SPFieldInitialization>                                
                        </SteeringParameterField>
                </SteeringParameterGroup>
        </GlobalSteeringParameters>
  25   06 Dec 2004 Matthias SchneebeliBug Reportss_getchar
> When romeConfig.xml does not exist. Rome goes to infinite loop.
> 
> I think the problem is ss_getchar.
> ROMEAnalyzer::ss_getchar does not seem to work on Linux ,because OS_UNIX is not defined.
> 
> "ends" is needed in following line.
> cout << "Do you like the framework to generate a new configuration file ([y]/n) ? "<<ends;
> otherwise this line does not appear before user hits keyboard.

done
  24   06 Dec 2004 Ryu SawadaInfoChangeable folder as branch a tree
I tried to make changeable folder a branch of tree.
I could process data. Rome succeeded to write the tree.

But when I tried to draw a leaf of the branch, root complains that the class name is invalid.
  23   03 Dec 2004 Ryu SawadaBug Report-e option
When I used "-e" option in generated framework. It stopped immediately after starting analysis.

When I commented out following two lines in ROMEEventLoop.cpp. It worked.

  // check event numbers
      int status = gROME->CheckEventNumber(event);
      if (status==0) {
//	this->SetContinue();
//	return true;
      }
  22   02 Dec 2004 Ryu SawadaSuggestionMidas event definition
I finished Macintosh porting.
I checked it in offline mode , but not yet online mode.

I needed to add byte swapping code.
For bank swapping, if HAVE_MIDAS is defined it uses bk_swap in midas.h, in the other case it uses 
ROMEEventLoop::bk_swap.
Byte swapping will be done if cpu is PowerPC (MacOSX or Linux on Macintosh). Data should be written 
on little-endian machine like Intel.

Important point is If there is banks whose type is not MIDAS, rome may not work on Macintosh.
I want to propose a new MidasBanks scheme of xml file to fix this problem. Structure of EventDefinition 
is according to EVENT_DEF in mana.c.

When rome reads Midas file(offline) or ODB(odb), if the event ID is listed in xml configuration file and 
"Disabled" is false and Format is MIDAS, rome reads banks listed for the event ID, in the other case rome skips the event and goes to next 
event.

Probably this way will help statistics handling in online mode for also Intel platform. Because at this 
moment, rome assumes "Equipment" in ODB is always "Trigger" and "Scaler". But of coarse there can be 
other equipments. (There is possibility that ODB does not have "Scaler" too)

<MidasBanks>
   <EventHeader>
      <Folder>Event</Folder>
      <EventId>ID</EventId>
      <TriggerMask>Mask</TriggerMask>
      <SerialNumber>Eventnumber</SerialNumber>
      <TimeStamp>Time</TimeStamp>
   </EventHeader>
   <EventDefinition>
      <EventName>Trigger</EventName>
      <EventId>1</EventId>
      <Format>MIDAS</Format>
      <Disabled>false</Disabled>
      <Banks>
         <Bank>
            <BankName>ADC0</BankName>
            <BankType>unsigned short</BankType>
         </Bank>
         <Bank>
            <BankName>TDC0</BankName>
            <BankType>unsigned short</BankType>
         </Bank>
      </Banks>
   </EventDefinition>
   <EventDefinition>
      <EventName>Scaler</EventName>
      <EventId>2</EventId>
         <Format>YBOS</Format>
         <Disabled>true</Disabled>
         <Banks>
            <Bank>
               <BankName>SCLR</BankName>
               <BankType>unsigned long</BankType>
            <Bank>
         </Banks>	
      </EventDefinition>
      <EventDefinition>
         <EventName>HV</EventName>
         <EventId>3</EventId>
         <Format>FIXED</Format>
         <Disabled>true</Disabled>
      </EventDefinition>
</MidasBanks>

P.S.
If there is no plan to support YBOS and FIXED format. <Format> is not needed definitly.
  21   27 Nov 2004 Ryu SawadaBug Reportss_getchar
When romeConfig.xml does not exist. Rome goes to infinite loop.

I think the problem is ss_getchar.
ROMEAnalyzer::ss_getchar does not seem to work on Linux ,because OS_UNIX is not defined.

"ends" is needed in following line.
cout << "Do you like the framework to generate a new configuration file ([y]/n) ? "<<ends;
otherwise this line does not appear before user hits keyboard.
  20   19 Nov 2004 Ryu SawadaBug ReportGlobalSteering
> > When I define several "SteeringParameterGroup"s, builder maked nesting classes instead to make each 
> > classes.
> 
> done
It is still not fixed. In case of following configuration.
"InvalidValue" was in "Switch" class.
Is it invalid to put a SteeringParameterField after SteeringParameterGroup ?

<GlobalSteeringParameters>
  <SteeringParameterGroup>
    <SPGroupName>Switch</SPGroupName>
    <SteeringParameterField>
      <SPFieldName>Piedi</SPFieldName>
      <SPFieldType>Bool_t</SPFieldType>
      <SPFieldInitialization>0</SPFieldInitialization>
      <SPFieldComment>Switch for pedestal calculation</SPFieldComment>
    </SteeringParameterField>
  </SteeringParameterGroup>
  <SteeringParameterField>
    <SPFieldName>InvalidValue</SPFieldName>
    <SPFieldType>Float_t</SPFieldType>
    <SPFieldInitialization>-1000</SPFieldInitialization>
    <SPFieldComment>Invalid value</SPFieldComment>
  </SteeringParameterField>
</GlobalSteeringParameters>
  19   18 Nov 2004 Matthias SchneebeliBug ReportGlobalSteering
> When I define several "SteeringParameterGroup"s, builder maked nesting classes instead to make each 
> classes.

done
  18   17 Nov 2004 Ryu SawadaSuggestionReverse sorting of database
User may want to read database in inverse order.

To add new rule to specify wheather the order is normal or opposit may be useful.

For instance following path gives the latest version of pedestal in database.
"/LPPedestal(id=%d)/version;LPPedestal/version(-)",gAnalyzer->GetCurrentRunNumber()

Concerning SQL database. To sort opposite is easy. Just put keyword "DESC" after "ORDER BY" phrase.
  17   12 Nov 2004 Ryu SawadaBug ReportGlobalSteering
When I define several "SteeringParameterGroup"s, builder maked nesting classes instead to make each 
classes.
  16   12 Nov 2004 Ryu SawadaSuggestionMakefile
In Makefile xmlibs and sqllibs is defined like this. 
xmllibs := -lxml2 -lz
sqllibs := -lmysql
But this is not correct sometimes.
Actually sqllibs for my environment should be -L'/usr/lib/mysql' -lmysqlclient

If you use the same way as rootlibs. It may be better.

xmllibs := $(shell xml2-config --libs)
xmlcflags := $(shell xml2-config --cflags)
sqllibs := $(shell mysql_config --libs)
sqlcflags := $(shell mysql_config --cflags)
  15   10 Nov 2004 Ryu SawadaSuggestionBank size check
> in ROMEEventLoop::ReadEvent(), if  gROME->isOffline() and gROME->isMidas(),
> ROME checks if bank size is greater than 0.
> 
> But It can happen that the bank size is 0 in normal file.
> (Actually in my midas file bank size of "environment data" is 0 at this moment)

Point may be that data format of "environment data" in my midas file is "FIXED".
According to MIDAS document, MIDAS analyzer cannnot work with this format too.
I guess it can happen that bank size seems negative when ROME reads FIXED data.
  14   09 Nov 2004 Ryu SawadaSuggestionBank size check
in ROMEEventLoop::ReadEvent(), if  gROME->isOffline() and gROME->isMidas(),
ROME checks if bank size is greater than 0.

But It can happen that the bank size is 0 in normal file.
(Actually in my midas file bank size of "environment data" is 0 at this moment)

---------------------------------------------
 else if (gROME->isOffline()&&gROME->isMidas()) {
      // read event header
      EVENT_HEADER *pevent = (EVENT_HEADER*)gROME->GetMidasEvent();
      bool readError = false;
               .
               .
               .
         if (pevent->data_size <= 0) readError = true;
         else {
            n = read(fMidasFileHandle, pevent+1, pevent->data_size);
            if (n != (int) pevent->data_size) readError = true;
	    if ((int) ((BANK_HEADER*)(pevent+1))->data_size < 0) readError = true;    <-- I changed here
         }
      }
      // check input
      if (readError) {
         if (n > 0) cout << "Unexpected end of file\n";
         this->SetEndOfRun();
         return true;
  13   16 Oct 2004 Ryu SawadaInfoMIDAS status update
"Analyzed" fields in MIDAS status display are always 0.0% as you can see in the attached file.
Is it possible to implement function to update this field ?
Attachment 1: midas_status.jpg
midas_status.jpg
  12   14 Oct 2004 Matthias SchneebeliSuggestionTTree filling in online mode.
> In my case, in online mode, I don't need to wirte TTree.
> But I want to fill it, because we use it to see data with using TSocket connection.
> 
> How do you think about filling TTree even if write flag is not toggled ?

I implemented a fill flag for the trees in the romeConfig file.

However, if your fill flag is true and your write flag false, then the tree will be 
filled in memory completely. Which means that, if the tree is large, a memory overflow 
occurs. Therefore you should only do this for circular trees.
ELOG V3.1.4-2e1708b5