> FYI, I am presently working in an updated version of roody.

The new version of Roody has been commited.

It has been tested only on Linux (SL4.3) and while we are shaking out the new bugs,
all are welcome to try it and report any problems. It should not eat your data.

If the new version does not work for you at all, the old version was preserved as
an SVN branch, accessible using this SVN command:
svn checkout svn://ladd00.triumf.ca/roody/branches/roody-v1 roody-v1

K.O.

> > FYI, I am presently working in an updated version of roody.
> 
> The new version of Roody has been commited.
> 
> It has been tested only on Linux (SL4.3) and while we are shaking out the new bugs,
> all are welcome to try it and report any problems. It should not eat your data.
> 
> If the new version does not work for you at all, the old version was preserved as
> an SVN branch, accessible using this SVN command:
> svn checkout svn://ladd00.triumf.ca/roody/branches/roody-v1 roody-v1

(the email notification for this message did not work at first, trying again)

K.O.

For the record, ROODY svn rev 236 builds and runs on MacOS 10.6.4 with ROOT 5.26.00c. K.O.

I removed the checks for ROOTSYS being the same at run time and compilation time. 
These checks never worked right and are unnecessary since we always install roody 
separately for each experiment and ROOTSYS settings are always consistent.
K.O.

I'm having a Roody refresh problem: when I draw groups in online mode the entire
canvas is refreshed with the most recently selected single histogram, instead of
the group.  I used svn to install the most recent version (svn checkout
svn://ladd00.triumf.ca/roody/trunk roody).  Any help would be greatly appreciated!

I found that the SVN repo is forbidden for anonymous users now.

> I found that the SVN repo is forbidden for anonymous users now.

Please use username "svn", password "svn", per instructions here:
http://www.triumf.info/wiki/DAQwiki/index.php/DaqSvn

K.O.

> I found that the SVN repo is forbidden for anonymous users now.

It is possible that you are referencing the SVN repo using the "svn:" access method. This access method was recently 
disabled.

Please switch to the "https:" method (username/password svn/svn) using this command:

cd .../roody
svn switch --relocate svn://ladd00.triumf.ca/roody https://ladd00.triumf.ca/svn/roody

K.O.

test of Roody forum email notification. K.O.

anoncvs account is not working anymore.

Please fix that.

Thanks 

Matthias

Access to Roody from anonymous is restored:

cvs -e ssh -d anoncvs@midas.triumf.ca:/usr/local/cvsroot checkout roody
pwd: anoncvs

> Access to Roody from anonymous is restored:
> cvs -e ssh -d anoncvs@midas.triumf.ca:/usr/local/cvsroot checkout roody
> pwd: anoncvs

What was the fix? I do not think it was ever broken, except for the name change from "miroodas" to "roody", which I could not document until Pierre restored this Elog forum 
a few hours ago. K.O.

Hi All,

I'm running Roody with MIDAS 2.0.0 and ROOT 5.14e on Scientific Linux 4.4. 
When Roody is monitoring the online histograms on Localhost, there are two 
possibilities that Roody will kill the MIDAS Analyzer: 
1) quiting Roody
2) unzoom a histogram when auto-refresh is on

Any ideas?

Best Regards,
Jimmy

Error in <TFile::TFile>: file /last.root does not exist

 *** Break *** segmentation violation

 Program received signal SIGSEGV, Segmentation fault.
 [Switching to Thread 1090525536 (LWP 17985)]
 0x00000000004114e6 in root_server_thread (arg=<value optimized out>) at src/mana.c:5333
 Current language:  auto; currently c++
 (gdb) next
 [midas.c:2416:bm_validate_client_index,ERROR] Invalid client index 1 in buffer 'SYSMSG'. Client name '', pid 0 should be 17973
 0x00002b800b8a5460 in sighandler () from /opt/ROOT/Versions/Current/lib/libCore.so.5.18
 (gdb) next
 Single stepping until exit from function _Z10sighandleri, 
 which has no line number information.
 Cannot remove breakpoints because program is no longer writable.
 It might be running in another process.
 Further execution is probably impossible.
 0x00002b800b8a546e in sighandler () from /opt/ROOT/Versions/Current/lib/libCore.so.5.18
 ptrace: &#23052;&#8451;&#28225;&#38317;&#65348;&#37340;&#26473;&#28058;&#9660;.
 (gdb) next
 Single stepping until exit from function _Z10sighandleri, 
 which has no line number information.
 Cannot remove breakpoints because program is no longer writable.
 It might be running in another process.
 Further execution is probably impossible.
 0x00002b800b8a546e in sighandler () from /opt/ROOT/Versions/Current/lib/libCore.so.5.18
 ptrace: &#23052;&#8451;&#28225;&#38317;&#65348;&#37340;&#26473;&#28058;&#9660;.
 (gdb) next
 Single stepping until exit from function _Z10sighandleri, 
 which has no line number information.
 Cannot remove breakpoints because program is no longer writable.
 It might be running in another process.
 Further execution is probably impossible.
 0x00002b800b8a546e in sighandler () from /opt/ROOT/Versions/Current/lib/libCore.so.5.18

$ uname -a
Linux daq-heg 2.6.18-5-amd64 #1 SMP Sat Dec 22 20:43:59 UTC 2007 x86_64 GNU/Linux

$ gcc -v
Using built-in specs.
Target: x86_64-linux-gnu
Configured with: ../src/configure -v 
--enable-languages=c,c++,fortran,objc,obj-c++,treelang --prefix=/usr 
--enable-shared --with-system-zlib --libexecdir=/usr/lib 
--without-included-gettext --enable-threads=posix --enable-nls 
--program-suffix=-4.1 --enable-__cxa_atexit --enable-clocale=gnu 
--enable-libstdcxx-debug --enable-mpfr --enable-checking=release 
x86_64-linux-gnu
Thread model: posix
gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)

$ root-config --config
linuxx8664gcc --prefix=/opt/ROOT/Versions/5.18.00-gcc 
--datadir=/opt/ROOT/Versions/5.18.00-gcc/share 
--docdir=/opt/ROOT/Versions/5.18.00-gcc/doc 
--incdir=/opt/ROOT/Versions/5.18.00-gcc/include 
--libdir=/opt/ROOT/Versions/5.18.00-gcc/lib 
--etcdir=/opt/ROOT/Versions/5.18.00-gcc/etc 
--elispdir=/opt/ROOT/Versions/5.18.00-gcc/share/emacs/site-lisp --enable-cern 
--with-cern-libdir=/usr/lib --enable-fftw3 --enable-gdml --enable-mathcore 
--enable-mathmore --enable-opengl --enable-python --enable-qt --enable-roofit 
--enable-ruby --enable-shared --enable-soversion --enable-ssl --enable-xml 
--enable-xft --enable-xrootd --enable-g4root 
--with-g4-incdir=/opt/GEANT4/Versions/9.0.p01/include 
--with-g4-libdir=/opt/GEANT4/Versions/9.0.p01/lib/Linux-g++