amanda:/dev/sde 1715171101 smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-754.35.1.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Crucial/Micron RealSSD C300/M500 Device Model: Crucial_CT120M500SSD3 Serial Number: 14040965EE8A LU WWN Device Id: 5 00a075 10965ee8a Firmware Version: MU03 User Capacity: 120,034,123,776 bytes [120 GB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 6 Local Time is: Wed May 8 05:25:03 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 490) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 9) minutes. Conveyance self-test routine recommended polling time: ( 3) minutes. SCT capabilities: (0x0035) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 4 5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 86920 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 115 171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 173 Wear_Leveling_Count 0x0032 079 079 000 Old_age Always - 632 174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 100 180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 1990 183 SATA_Iface_Downshift 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 194 Temperature_Celsius 0x0022 100 044 000 Old_age Always - 245 (0 56 255 245 255) 196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0 202 Percent_Lifetime_Used 0x0031 079 079 000 Pre-fail Offline - 21 206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0 210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0 246 Total_Host_Sector_Write 0x0032 100 100 --- Old_age Always - 6278289590 247 Host_Program_Page_Count 0x0032 100 100 --- Old_age Always - 219683178 248 Bckgnd_Program_Page_Cnt 0x0032 100 100 --- Old_age Always - 4789239099 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Vendor (0xff) Completed without error 00% 58379 - # 2 Vendor (0xff) Completed without error 00% 58096 - # 3 Vendor (0xff) Completed without error 00% 57546 - # 4 Vendor (0xff) Completed without error 00% 57534 - # 5 Vendor (0xff) Completed without error 00% 57520 - # 6 Vendor (0xff) Completed without error 00% 57508 - # 7 Vendor (0xff) Completed without error 00% 57495 - # 8 Vendor (0xff) Completed without error 00% 57482 - # 9 Vendor (0xff) Completed without error 00% 57469 - #10 Vendor (0xff) Completed without error 00% 57456 - #11 Vendor (0xff) Completed without error 00% 57443 - #12 Vendor (0xff) Completed without error 00% 57430 - #13 Vendor (0xff) Completed without error 00% 57416 - #14 Vendor (0xff) Completed without error 00% 57404 - #15 Vendor (0xff) Completed without error 00% 57391 - #16 Vendor (0xff) Completed without error 00% 57379 - #17 Vendor (0xff) Completed without error 00% 57366 - #18 Vendor (0xff) Completed without error 00% 57354 - #19 Vendor (0xff) Completed without error 00% 57341 - #20 Vendor (0xff) Completed without error 00% 57329 - #21 Vendor (0xff) Completed without error 00% 57316 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.