grifstore0:/dev/sda 1715171101 smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.105.1.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Device Model: KINGSTON SM2280S3120G Serial Number: 50026B725708C9F0 Firmware Version: S8FM06.A User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Form Factor: M.2 Device is: Not in smartctl database [for details use: -P showall] ATA Version is: ATA8-ACS (minor revision not indicated) SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed May 8 05:25:01 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 255) seconds. Offline data collection capabilities: (0x1b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0 2 Throughput_Performance 0x0005 100 100 050 Pre-fail Offline - 0 3 Spin_Up_Time 0x0007 100 100 050 Pre-fail Always - 0 5 Reallocated_Sector_Ct 0x0013 100 100 050 Pre-fail Always - 0 7 Unknown_SSD_Attribute 0x000b 100 100 050 Pre-fail Always - 0 8 Unknown_SSD_Attribute 0x0005 100 100 050 Pre-fail Offline - 0 9 Power_On_Hours 0x0012 100 100 000 Old_age Always - 20000 10 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0 12 Power_Cycle_Count 0x0012 100 100 000 Old_age Always - 69 168 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 6 170 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 400 173 Unknown_Attribute 0x0012 100 100 000 Old_age Always - 11272431 175 Program_Fail_Count_Chip 0x0012 100 100 010 Old_age Always - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0012 100 100 000 Old_age Always - 28 194 Temperature_Celsius 0x0023 100 100 020 Pre-fail Always - 0 196 Reallocated_Event_Count 0x0002 100 100 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x000b 100 100 050 Pre-fail Always - 0 218 Unknown_Attribute 0x000b 100 100 050 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x000b 100 100 000 Pre-fail Always - 2196 240 Unknown_SSD_Attribute 0x0013 100 100 050 Pre-fail Always - 0 241 Total_LBAs_Written 0x0012 100 100 000 Old_age Always - 1091 242 Total_LBAs_Read 0x0012 100 100 000 Old_age Always - 1286 244 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 172 245 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 239 246 Unknown_Attribute 0x0002 100 100 050 Old_age Always - 5721032 250 Read_Error_Retry_Rate 0x0002 100 100 050 Old_age Always - 48574 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported