dcrc02:/dev/sdc 1715171101 smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-754.35.1.el6.x86_64] (local build) Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A120G Serial Number: 50026B72560986CF LU WWN Device Id: 5 0026b7 2560986cf Firmware Version: 603ABBF0 User Capacity: 120,034,123,776 bytes [120 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: ACS-2 revision 3 Local Time is: Wed May 8 05:25:01 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x02) Offline data collection activity was completed without error. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 0/182395235 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours_and_Msec 0x0032 015 015 000 Old_age Always - 74999h+04m+09.350s 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 37 171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 22 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1 181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 189 Airflow_Temperature_Cel 0x0000 035 047 000 Old_age Offline - 35 (0 235 0 47 0) 194 Temperature_Celsius 0x0022 035 047 000 Old_age Always - 35 (0 235 0 47 0) 195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/182395235 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/182395235 204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/182395235 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 231 SSD_Life_Left 0x0000 088 088 011 Old_age Offline - 4294967296 233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 58511 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 8080 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 8080 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 96262 244 Unknown_Attribute 0x0000 085 085 010 Old_age Offline - 29688261 SMART Error Log not supported SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 59365 - # 2 Short offline Completed without error 00% 59197 - # 3 Short offline Completed without error 00% 59196 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.