titan00:/dev/sdb 1714911901 smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.105.1.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: SandForce Driven SSDs Device Model: KINGSTON SV300S37A240G Serial Number: 50026B7757006302 LU WWN Device Id: 5 0026b7 757006302 Firmware Version: 603ABBF0 User Capacity: 240,057,409,536 bytes [240 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS, ACS-2 T13/2015-D revision 3 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Sun May 5 05:25:01 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x7d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 48) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x0025) SCT Status supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0032 095 095 050 Old_age Always - 0/221257302 5 Retired_Block_Count 0x0033 100 100 003 Pre-fail Always - 0 9 Power_On_Hours_and_Msec 0x0032 017 017 000 Old_age Always - 73240h+59m+54.400s 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 16 171 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 174 Unexpect_Power_Loss_Ct 0x0030 000 000 000 Old_age Offline - 12 177 Wear_Range_Delta 0x0000 000 000 000 Old_age Offline - 1 181 Program_Fail_Count 0x000a 100 100 000 Old_age Always - 0 182 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0 187 Reported_Uncorrect 0x0012 100 100 000 Old_age Always - 0 189 Airflow_Temperature_Cel 0x0000 024 050 000 Old_age Offline - 24 (Min/Max 10/50) 194 Temperature_Celsius 0x0022 024 050 000 Old_age Always - 24 (Min/Max 10/50) 195 ECC_Uncorr_Error_Count 0x001c 120 120 000 Old_age Offline - 0/221257302 196 Reallocated_Event_Count 0x0033 100 100 003 Pre-fail Always - 0 201 Unc_Soft_Read_Err_Rate 0x001c 120 120 000 Old_age Offline - 0/221257302 204 Soft_ECC_Correct_Rate 0x001c 120 120 000 Old_age Offline - 0/221257302 230 Life_Curve_Status 0x0013 100 100 000 Pre-fail Always - 100 231 SSD_Life_Left 0x0000 093 093 011 Old_age Offline - 55834574848 233 SandForce_Internal 0x0032 000 000 000 Old_age Always - 63251 234 SandForce_Internal 0x0032 000 000 000 Old_age Always - 33929 241 Lifetime_Writes_GiB 0x0032 000 000 000 Old_age Always - 33929 242 Lifetime_Reads_GiB 0x0032 000 000 000 Old_age Always - 196412 244 Unknown_Attribute 0x0000 092 092 010 Old_age Offline - 16843009 SMART Error Log not supported SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.