titan00:/dev/sdc 1714998301 smartctl 7.0 2018-12-30 r4883 [x86_64-linux-3.10.0-1160.105.1.el7.x86_64] (local build) Copyright (C) 2002-18, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Desktop HDD.15 Device Model: ST4000DM000-1F2168 Serial Number: Z300L9K9 LU WWN Device Id: 5 000c50 063c7ccda Firmware Version: CC52 User Capacity: 4,000,787,030,016 bytes [4.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Mon May 6 05:25:01 2024 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 612) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 528) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x1085) SCT Status supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 115 097 006 Pre-fail Always - 94083760 3 Spin_Up_Time 0x0003 092 092 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 22 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 56 7 Seek_Error_Rate 0x000f 073 049 030 Pre-fail Always - 51854187991 9 Power_On_Hours 0x0032 085 011 000 Old_age Always - 13470 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 22 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0 187 Reported_Uncorrect 0x0032 033 033 000 Old_age Always - 67 188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0 0 0 189 High_Fly_Writes 0x003a 098 098 000 Old_age Always - 2 190 Airflow_Temperature_Cel 0x0022 076 051 045 Old_age Always - 24 (Min/Max 17/28) 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 17 193 Load_Cycle_Count 0x0032 010 010 000 Old_age Always - 180537 194 Temperature_Celsius 0x0022 024 049 000 Old_age Always - 24 (0 12 0 0 0) 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 78926h+49m+43.408s 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 17133702334 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 8459091166464 SMART Error Log Version: 1 ATA Error Count: 67 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 67 occurred at disk power-on lifetime: 4215 hours (175 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 11d+17:28:52.386 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:52.385 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:52.358 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:52.336 READ FPDMA QUEUED ea 00 00 00 00 00 a0 00 11d+17:28:52.314 FLUSH CACHE EXT Error 66 occurred at disk power-on lifetime: 4215 hours (175 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 11d+17:28:48.010 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:47.982 READ FPDMA QUEUED ea 00 00 00 00 00 a0 00 11d+17:28:47.932 FLUSH CACHE EXT 60 00 00 ff ff ff 4f 00 11d+17:28:47.932 READ FPDMA QUEUED 61 00 08 ff ff ff 4f 00 11d+17:28:47.932 WRITE FPDMA QUEUED Error 65 occurred at disk power-on lifetime: 4215 hours (175 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 11d+17:28:43.443 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:43.443 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:43.442 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:43.441 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:43.441 READ FPDMA QUEUED Error 64 occurred at disk power-on lifetime: 4215 hours (175 days + 15 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 00 ff ff ff 4f 00 11d+17:28:39.053 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:39.053 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:39.051 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:38.020 READ FPDMA QUEUED 60 00 00 ff ff ff 4f 00 11d+17:28:37.994 READ FPDMA QUEUED Error 63 occurred at disk power-on lifetime: 4113 hours (171 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 08 ff ff ff 4f 00 7d+11:00:09.002 READ FPDMA QUEUED 61 00 08 ff ff ff 4f 00 7d+11:00:09.002 WRITE FPDMA QUEUED ea 00 00 00 00 00 a0 00 7d+11:00:09.002 FLUSH CACHE EXT ef 10 02 00 00 00 a0 00 7d+11:00:09.002 SET FEATURES [Enable SATA feature] 27 00 00 00 00 00 e0 00 7d+11:00:09.002 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3] SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.