| Date |
User |
Note |
| 2018-03-09 00:00:00 |
{"user_name":"root"} |
Boot blocks without Jtag cable connected
HW OK |
| 2018-06-06 00:00:00 |
{"user_name":"acapra"} |
sca2 bad |
| 2019-05-14 00:00:00 |
{"user_name":"olchansk"} |
labeled "sca C dead, all SCA low baseline". K.O. |
| 2019-09-25 00:00:00 |
{"user_name":"olchansk"} |
boot ok, ping ok, esper ok. updated firmware. K.O. |
| 2019-09-25 00:00:00 |
{"user_name":"olchansk"} |
all sca ok, offset 1200. K.O. |
| 2019-10-04 00:00:00 |
{"user_name":"olchansk"} |
changed R37, R38 to 1.2k. note: R39, R40 is 2.1k instead 2.2k. offset 1600. K.O. |
| 2019-10-04 00:00:00 |
{"user_name":"olchansk"} |
f.w. pulser all channels ok. K.O. |
| 2019-11-09 00:00:00 |
{"user_name":"olchansk"} |
sometimes does not boot (no sata link, no dhcp, no ping, no esper). say 1 out of 10 power cycles. K.O.
|
| 2020-10-11 00:00:00 |
{"user_name":"olchansk"} |
SCA-C has some digital noise. K.O. |
| 2020-10-11 00:00:00 |
{"user_name":"olchansk"} |
SCA-C reads version 65535 (should be 257). SCA gain control works. K.O. |