| Date |
User |
Note |
| 2018-06-06 00:00:00 |
|
sca1 dead |
| 2019-05-14 00:00:00 |
|
labeled "SCA B dead, SCA D offset". K.O.
|
| 2019-09-23 00:00:00 |
|
loaded new firmware. boot ok, ping ok, esper ok. K.O. |
| 2019-09-23 00:00:00 |
|
sca0 ok, sca1 dead, sca2, sca3 ok. K.O. |
| 2019-09-23 00:00:00 |
|
sca 2 ri 70 scan chan 63 bad. K.O. |
| 2019-10-08 00:00:00 |
|
looked at the board in the microscope, looked for the bad channel, no faults. K.O. |
| 2019-10-08 00:00:00 |
|
retested, no dead channels. K.O. |
| 2019-10-11 00:00:00 |
|
stored with all the other broken pwbs. K.O. |
| 2019-10-30 00:00:00 |
|
mounted on short TPC. K.O. |
| 2020-08-21 00:00:00 |
|
mounted on long TPC. SFP VCC measures 4.1V instead of 3.3V, one SCA suspected bad. K.O. |
| 2020-08-28 00:00:00 |
|
LM fixed short of SFP VCC to 5V bus bar. |
| 2020-08-28 00:00:00 |
|
all 4 SCA are working, see FW pulser on long TPC. K.O. |
| 2020-08-28 00:00:00 |
|
5V current out of range -- AC |
| 2020-10-04 00:00:00 |
|
pwb15 is working now, no anomalies. asked acapra "what happened?". K.O.
|
| 2020-10-04 00:00:00 |
|
status note from lmartin "5V current out of range, busted LDOs 1A/B". (see history). |
| 2022-06-30 00:00:00 |
|
stopped booting, remains mounted on rTPC, pos 4-7 |
| 2023-05-09 00:00:00 |
|
FPGA won't run, https://alphacpc05.cern.ch/elog/Detectors/6054 |