amanda:/dev/sde
1575549781
dev="/dev/sde">
smartctl 5.43 2016-09-28 r4347 [x86_64-linux-2.6.32-754.11.1.el6.x86_64] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Crucial/Micron RealSSD C300/M500
Device Model: Crucial_CT120M500SSD3
Serial Number: 14040965EE8A
LU WWN Device Id: 5 00a075 10965ee8a
Firmware Version: MU03
User Capacity: 120,034,123,776 bytes [120 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: ATA-8-ACS revision 6
Local Time is: Thu Dec 5 04:43:01 2019 PST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 360) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 9) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 4
5 Reallocated_Sector_Ct 0x0033 100 100 000 Pre-fail Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 49847
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 93
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
173 Wear_Leveling_Count 0x0032 089 089 000 Old_age Always - 335
174 Unexpect_Power_Loss_Ct 0x0032 100 100 000 Old_age Always - 80
180 Unused_Rsvd_Blk_Cnt_Tot 0x0033 000 000 000 Pre-fail Always - 1990
183 SATA_Iface_Downshift 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 076 049 000 Old_age Always - 24 (0 51 0 0 0)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 16
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 100 100 000 Old_age Always - 0
202 Percent_Lifetime_Used 0x0031 089 089 000 Pre-fail Offline - 11
206 Write_Error_Rate 0x000e 100 100 000 Old_age Always - 0
210 Success_RAIN_Recov_Cnt 0x0032 100 100 000 Old_age Always - 0
246 Total_Host_Sector_Write 0x0032 100 100 --- Old_age Always - 4481943854
247 Host_Program_Page_Count 0x0032 100 100 --- Old_age Always - 155334324
248 Bckgnd_Program_Page_Cnt 0x0032 100 100 --- Old_age Always - 2510571475
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 43890 -
# 2 Vendor (0xff) Completed without error 00% 42242 -
# 3 Vendor (0xff) Completed without error 00% 40318 -
# 4 Vendor (0xff) Completed without error 00% 37563 -
# 5 Vendor (0xff) Completed without error 00% 25770 -
# 6 Vendor (0xff) Completed without error 00% 8867 -
# 7 Vendor (0xff) Completed without error 00% 8675 -
# 8 Vendor (0xff) Completed without error 00% 7713 -
# 9 Vendor (0xff) Completed without error 00% 7530 -
#10 Vendor (0xff) Completed without error 00% 6688 -
#11 Vendor (0xff) Completed without error 00% 6654 -
#12 Vendor (0xff) Completed without error 00% 5892 -
#13 Vendor (0xff) Completed without error 00% 5693 -
#14 Vendor (0xff) Completed without error 00% 5358 -
#15 Vendor (0xff) Completed without error 00% 5308 -
#16 Vendor (0xff) Completed without error 00% 4341 -
#17 Vendor (0xff) Completed without error 00% 4185 -
#18 Vendor (0xff) Completed without error 00% 3896 -
#19 Vendor (0xff) Completed without error 00% 3511 -
#20 Vendor (0xff) Completed without error 00% 3200 -
#21 Vendor (0xff) Completed without error 00% 531 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
</data>