BNMR: Run numbering

• BNMR overview
• Getting started
• Troubleshooting
• All BNMR pages
• Midas

• BNMR
• Environment variables
• Experimental Modes
• Getting Started
• Nomenclature

Introduction

bnmr and bnqr experiments use the MUSR run number scheme, whereby "Real" runs are assigned a run number in a certain range depending on the beamline. All "Test" runs have a run number selected from the test run number range (independent of beamline).

This means that the selection of the next run number is controlled by software (see #Automatic selection of the run number).

Run Number Ranges

The following run number ranges have been assigned:

BNMR

40001 - 44499 inclusive

BNQR

45001 - 49999 inclusive

test

30001 - 30499 inclusive

Automatic selection of the run number

The selection of the next run number is done automatically, controlled by the perlscript get_next_run_number.pl. This script is called by mdarc which saves the data, and indirectly by the test and real buttons on the BNMR: Custom Status page.

Without the automatic checking, duplicate runs between I-MUSR and TD-MUSR and holes in the run numbering are inevitable. To preserve the automatic run numbering scheme, users are prevented from editing the run number.

Prevent User from editing run number

By default, the MIDAS system allows the user to edit the run number at the begin-of-run. MIDAS provides a way of preventing editing of the run number. This is implemented in the ODB of both the bnmr and bnqr experiments, e.g.

[local:bnqr:Stopped]/>ls "/experiment/Edit on start/Edit run number" 
Edit run number                 n