BNMR: CAMP: Difference between revisions
en>Suz mNo edit summary |
No edit summary |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 19: | Line 19: | ||
The CAMP hostname is set in two places in the DAQ system : | The CAMP hostname is set in two places in the DAQ system : | ||
#[[BNMR: Experimental Setup#Environment Variables|environment variable]] '''CAMP_HOST''' | # The [[BNMR: Experimental Setup#Environment Variables|environment variable]] '''CAMP_HOST''' | ||
# In the ODB at | # In the ODB at {{Odbpath|path=Scanning/Camp/Settings/Server name}} | ||
== CAMP in BNMR/BNQR == | == CAMP in BNMR/BNQR == | ||
The CAMP system is used for three purposes in the BNMR/BNQR experiments: | The CAMP system is used for three purposes in the BNMR/BNQR experiments: | ||
* | * CAMP slow controls using the [[#CAMP User Interface]] | ||
* | * [[#CAMP Logging|logging]] of CAMP data to the saved file | ||
* | * Scanning of a CAMP device during data-taking in [[BNMR#Experimental (PPG) Modes|modes]] 1c and 1j. | ||
== CAMP User Interface == | == CAMP User Interface == | ||
Latest revision as of 11:01, 26 April 2022
Links
Introduction
The MUSR software package CAMP is used for the slow controls for the bnmr and bnqr experiments. The CAMP server runs on a MVME162 located in the VME crate. The CAMP system itself is accessed using the #CAMP User Interface (CUI). Using the CUI, the user can define instruments to be accessed by the DAQ system during the experiment.
CAMP Hostname
The CAMP Hostname is
- bnmrvw.triumf.ca for the bnmr experiment or
- polvw.triumf.ca for bnqr experiment
The CAMP hostname is set in two places in the DAQ system :
- The environment variable CAMP_HOST
- In the ODB at Scanning/Camp/Settings/Server name
CAMP in BNMR/BNQR
The CAMP system is used for three purposes in the BNMR/BNQR experiments:
- CAMP slow controls using the #CAMP User Interface
- logging of CAMP data to the saved file
- Scanning of a CAMP device during data-taking in modes 1c and 1j.
CAMP User Interface
To access the CUI, in an xterm type "camp".
[bnmr@isdaq01 ~]camp
A display similar to Figure 1 will appear.
The camp command will use the default camp hostname defined by the environment variable CAMP_HOST (bnmrvw.triumf.ca in Figure 1).
To access the Camp User Interface using a different camp host (temporarily), specify the camp hostname, e.g.
[bnmr@isdaq01 ~]camp -node polvw