DarkLight: Difference between revisions
Jump to navigation
Jump to search
(→Links) |
(→DAQ) |
||
| Line 30: | Line 30: | ||
* dl_tdc_mask can be used to disable each of the 32 TDC inputs (see map between TDC inputs and scintillator channels) | * dl_tdc_mask can be used to disable each of the 32 TDC inputs (see map between TDC inputs and scintillator channels) | ||
* there is no button to disable chronobox counters and rates for individual CB channels | * there is no button to disable chronobox counters and rates for individual CB channels | ||
= PPG32-Rev2 settings = | |||
== Jumper settings == | |||
* JMP1 - left (INP) | |||
* JMP2 - left (INP) | |||
* JMP3 - left (TTL input) | |||
* P0 - both right (NIM output) | |||
* P1 - both left (TTL output) | |||
* SW1 - 0 (VME address) | |||
* SW2 - 0 (VME address) | |||
* SW3 - 3 (VME A24 address 0x30'0000) | |||
== Build firmware == | |||
* ssh trinatdaq ### must be Ubuntu-20 to run quartus 13.1 | |||
* cd /home/olchansk/git/vme-nimio32-dl-clock/VME-NIMIO32/PPG32-Rev1 | |||
* /daq/quartus/13.1.4.182/quartus/bin/quartus | |||
* open VME-PPG32 project, processing -> start compilation | |||
* will produce new sof and pof files (jic file must be regenerated manually) | |||
* load sof file into FPGA using quartus jtag programmer, then load pof file into EPCS16 flasg using srunner, see below | |||
== Load firmware == | |||
* cd ~olchansk/git/vme | |||
* ./srunner_vme_gef.exe -id -16 /dev/null 0x300020 ### identify EPCS chip | |||
* ./srunner_vme_gef.exe -program -16 /home/olchansk/git/vme-nimio32-dl-clock/VME-NIMIO32/PPG32-Rev1/VME-PPG32.pof 0x300020 | |||
* ./test_VMENIMIO32_gef.exe --addr 0x300000 --reboot | |||
Revision as of 23:33, 31 May 2025
DarkLight experiment at TRIUMF
Links
- https://daq13.triumf.ca - detector facility daq station
- https://daq17.triumf.ca - MOB lab daq station
- git clone dldaq@daq00.triumf.ca/git/dlana - trigger detector analysis software
- DL-DB - trigger detector SiPM board and distribution board documentation
- https://daq00.triumf.ca/AgWiki/index.php/Chronobox - DLTDC base firmware documentation
- DL-TDC - DL-TDC special documentation
- VME-PPG32 - PPG32 documentation
- VME-NIMIO32#DL_clock_(PPG32-Rev2) - PPG32 (IO32) firmware documentation
- chronobox_firmware branch dl-tdc - DLTDC firmware git repo
- chronobox_software - DLTDC MIDAS frontend git repo
- (to be split) dldb - fedldb git repo
Drawings
File:DL-trigger-detector.drawio.pdf
DAQ
- ODB /eq/cb02/settings:
- dl_ctrl for A+B 0xC0FE
- dl_ctrl for A*B 0xC0F0
- A is grand-OR of all scintillators on the TDC-A cable (enabled by dl_trg_mask[7..0], 8 bits for the 8 scintillators)
- B is grand-OR of all scintillators on the TDC-B cable (enabled by dl_trg_mask[15..8], 8 bits for the 8 scintillators)
- each scintillator signal (A[7..0] and B[7..0]) is L*R hardwired in dl/dl.sv
- dl_tdc_mask can be used to disable each of the 32 TDC inputs (see map between TDC inputs and scintillator channels)
- there is no button to disable chronobox counters and rates for individual CB channels
PPG32-Rev2 settings
Jumper settings
- JMP1 - left (INP)
- JMP2 - left (INP)
- JMP3 - left (TTL input)
- P0 - both right (NIM output)
- P1 - both left (TTL output)
- SW1 - 0 (VME address)
- SW2 - 0 (VME address)
- SW3 - 3 (VME A24 address 0x30'0000)
Build firmware
- ssh trinatdaq ### must be Ubuntu-20 to run quartus 13.1
- cd /home/olchansk/git/vme-nimio32-dl-clock/VME-NIMIO32/PPG32-Rev1
- /daq/quartus/13.1.4.182/quartus/bin/quartus
- open VME-PPG32 project, processing -> start compilation
- will produce new sof and pof files (jic file must be regenerated manually)
- load sof file into FPGA using quartus jtag programmer, then load pof file into EPCS16 flasg using srunner, see below
Load firmware
- cd ~olchansk/git/vme
- ./srunner_vme_gef.exe -id -16 /dev/null 0x300020 ### identify EPCS chip
- ./srunner_vme_gef.exe -program -16 /home/olchansk/git/vme-nimio32-dl-clock/VME-NIMIO32/PPG32-Rev1/VME-PPG32.pof 0x300020
- ./test_VMENIMIO32_gef.exe --addr 0x300000 --reboot