Lazylogger: Difference between revisions

From MidasWiki
Jump to navigation Jump to search
Line 56: Line 56:
                                 SCRIPT: /home/agdaq/online/bin/lazy_eos.perl
                                 SCRIPT: /home/agdaq/online/bin/lazy_eos.perl
                                 SFTP  : sftp://user@host.domain.ca/home/user/data
                                 SFTP  : sftp://user@host.domain.ca/home/user/data
                                public sshkey is to be setup on the destination host.
  Capacity (Bytes)              : Maximum capacity of the destination device, mainly for "TAPE" (ex: 5e+09)
  Capacity (Bytes)              : Maximum capacity of the destination device, mainly for "TAPE" (ex: 5e+09)
  List label                    : Lazylogger channel name (no default, to be filled by user to activate lazylogger) (ex: Mybackup)
  List label                    : Lazylogger channel name (no default, to be filled by user to activate lazylogger) (ex: Mybackup)

Revision as of 11:18, 4 September 2020


Links


Purpose

The lazylogger utility decouples the data acquisition from the data logging mechanism. The need for such an application has been dictated by the slow response time of the old media logging devices, such as tape devices. Delay due to tape mounting, re-tension and re-positioning implies that the data acquisition has to be held until operation completion. By using mlogger to log data to disk in a first stage and then using lazylogger to copy or move the stored files, the data acquisition can be kept running without interruption. These devices are no longer supported internally by Midas but can still be managed through scripts. Lazylogger is still much used for getting a copy of the original data to a remote data storage. While there are many ways to do this independently of the acquisition system, the lazylogger provides a simple way to manage this task. Lazylogger features are listed below.

  • Multiple lazyloggers can be running simultaneously on the same computer, each one taking care of a particular channel.
  • Each lazylogger channel will have a dedicated ODB tree (see ODB /Lazy Tree ) containing its own information.
  • All the lazylogger channels will be in the ODB under /Lazy/<channel-name>/....
  • Each channel tree is composed of two sub-trees Settings,Statistics and /Lazy ODB tree#The ODB /Lazy/<channel_name>.
  • Dynamic directory destination based on run number or date.
  • Script copy support.
  • Compression copy.

The Settings and Statistics trees are self-explanatory, and contain the operational parameters of the channel(s). Two hidden log files for each channel are created and updated ans resides in the main experiment directory (.<channel_name>.dirlist, .<chanel_name>.donelist), these files reflect the current state of the data copy. Lazylogger support internally data file transfer through FTP repository system. Improvements towards more generic support (including scripting and pipe compression) have been added as well.

Usage

Usage: lazylogger [-D] [-h <Hostname>] [-e <Experiment>] -c <channel name>

Arguments

[-h ] : help.
[-h hostname ]        : see common parameters
[-e experiment_name ] : see common parameters
[-D ]                 : start program as a daemon.
[-c channel ]         : logging channel <channel-name>. Specify the lazylogger to activate.
[-z ]                 : zap statistics. Clear the statistics tree of all the defined lazylogger channels.
[-t ]                 : permit lazylogger to TALK msg.
[-n ]                 : No file purging on the source dir.
[-d ]                 : Additional debug messages

ODB setting fields

The settings field covers different operation mode of the lazylogger. Some of which may not be used at the present time. 

Period                        : Lazylogger check during idle phase (ex: 10) seconds
Maintain free space (%)       : Space on the source side (if exceeded, file will be purged based on status of copy (ex: 0) 
Stay behind                   : Keep lazylogger copying runs with run# - "stay behind" (ex: 1)
Alarm Class                   : Assign Alarm class  
Running condition             : running condition of lazylogger (ALWAYS, NEVER, WHILE_ACQ_NOT_RUNNING) (ex: ALWAYS)
Data dir                      : Data source directory (ex: /home/midas/online)
Data format                   : Data format (def: MIDAS)
Filename format               : Data source file name format (ex: run%05d.mid)
                                In case of script, the file can be of any type (ex: iris_%08d%04d.mid.gz, run%05dsub%03d.mid.lz4)
Backup type                   : Copy method (Disk, Tape, Script, SFTP, FTP) Execute after rewind          : Script to be performed by lazylogger  side in "backup Type=TAPE"
Path                          : Destination path (ex:
                                DISK  : /data/dragon/Summer-2019/
                                SCRIPT: /home/dsproto/online/dsproto_daq/lazy_to_analyzer.sh
                                SCRIPT: /home/agdaq/online/bin/lazy_eos.perl
                                SFTP  : sftp://user@host.domain.ca/home/user/data
                                public sshkey is to be setup on the destination host.
Capacity (Bytes)               : Maximum capacity of the destination device, mainly for "TAPE" (ex: 5e+09)
List label                     : Lazylogger channel name (no default, to be filled by user to activate lazylogger) (ex: Mybackup)
Execute before writing file    : Script to run before each lazylogger copy operation  
Execute after writing file     : Script to run after each completion of lazylogger copy operation
Modulo.Position                : Enable multiple lazy on same source. Ex: 3ch : 3.0, 3.1, 3.2 
Copy Delay                     : Run transition handling during script operation (def: 0)
Tape Data Append               : Enable positioning of the "TAPE" to EOD before each lazy copy (def: y)

Setting up the Lazylogger

The Lazylogger requires to be set up before the data file can be moved. This setup consists of the following steps:

1. Invoke the lazylogger once for setting up the appropriate ODB <channel-name> tree and exit. In this example, the <channel-name> is "Pion".
 >lazylogger -c pion
2. Edit the newly created ODB tree. Set the Settings field(s) to match your requirements.
The following example is shown using odbedit :
> odbedit -e midas
[local:midas:Stopped]/>cd /Lazy/pion/
[local:midas:Stopped]pion>ls
[local:midas:Stopped]pion>ls -lr
Key name                        Type    #Val  Size  Last Opn Mode Value
---------------------------------------------------------------------------
pion                           DIR
   Settings                    DIR
       Maintain free space(%)  INT     1     4     3m   0   RWD  0
       Stay behind             INT     1     4     3m   0   RWD  -3
       Alarm Class             STRING  1     32    3m   0   RWD  
       Running condition       STRING  1     128   3m   0   RWD  ALWAYS
       Data dir                STRING  1     256   3m   0   RWD  /home/midas/online
       Data format             STRING  1     8     3m   0   RWD  MIDAS
       Filename format         STRING  1     128   3m   0   RWD  run%05d.mid
       Backup type             STRING  1     8     3m   0   RWD  Pion
       Execute after rewind    STRING  1     64    3m   0   RWD  
       Path                    STRING  1     128   3m   0   RWD  
       Capacity (Bytes)        FLOAT   1     4     3m   0   RWD  5e+09
       List label              STRING  1     128   3m   0   RWD  
   Statistics                  DIR
       Backup file             STRING  1     128   3m   0   RWD  none 
       File size [Bytes]       DOUBLE  1     4     3m   0   RWD  0
       KBytes copied           DOUBLE  1     4     3m   0   RWD  0
       Total Bytes copied      DOUBLE  1     4     3m   0   RWD  0
       Copy progress [%]       DOUBLE  1     4     3m   0   RWD  0
       Copy Rate [bytes per s] DOUBLE  1     4     3m   0   RWD  0
       Backup status [%]       DOUBLE  1     4     3m   0   RWD  0
       Number of Files         INT     1     4     3m   0   RWD  0
       Current Lazy run        INT     1     4     3m   0   RWD  0
[local:midas:Stopped]pion>cd Settings/
[local:midas:Stopped]Settings>set "Data dir" /data
[local:midas:Stopped]Settings>set "Capacity (Bytes)" 15e9


3. Start lazylogger in the background
>lazylogger -c Pion -D


4. Define List label key
At this point, the lazylogger is running and waiting for the List label key to be defined before starting the copy procedure.
> odbedit -e midas
[local:midas:Stopped]/>cd /Lazy/pion/Settings
[local:midas:Stopped]Settings>set "List label" cni-043

NOTE: The mstat utility will display information regarding the status of the lazylogger.

Operation of the Lazylogger

For every major operation of the lazylogger a message is sent to the Message buffer and will be appended to a default Lazy log file (lazy.log). These messages are the only means of finding out What/When/Where/How the lazylogger has operated on a data file. A fragment of the lazy.log for the iris experiment is shown below. In this case, the Maintain free space field was enabled which produces the cleanup of the data files and the entry in the List tree after copy. In this particular case, the lazylogger uses a perl script to push the data file to a data storage system using dCache. 

[local:iris:Stopped]/Lazy>
Key name                        Type    #Val  Size  Last Opn Mode Value
---------------------------------------------------------------------------
Lazy                            DIR
    Dcache                      DIR
        Settings                DIR
            Period              INT     1     4     51h  0   RWD  2
            Maintain free space INT     1     4     51h  0   RWD  15
            Stay behind         INT     1     4     51h  0   RWD  1
            Alarm Class         STRING  1     32    51h  0   RWD  
            Running condition   STRING  1     128   51h  0   RWD  ALWAYS
            Data dir            STRING  1     256   51h  0   RWD  /iris_data0/iris/current
            Data format         STRING  1     8     51h  0   RWD  MIDAS
            Filename format     STRING  1     128   51h  0   RWD  iris_%08d%04d.mid.gz
            Backup type         STRING  1     8     51h  0   RWD  Script
            Execute after rewindSTRING  1     64    51h  0   RWD  
            Path                STRING  1     128   51h  0   RWD  /home/iris/bin/lazy_dcache.perl
            Capacity (Bytes)    FLOAT   1     4     51h  0   RWD  5e+09
            List label          STRING  1     128   51h  0   RWD  Dcache
            Execute before writiSTRING  1     64    51h  0   RWD   
            Execute after writinSTRING  1     64    51h  0   RWD  
            Modulo.Position     STRING  1     8     51h  0   RWD  
            Tape Data Append    BOOL    1     4     51h  0   RWD  y
         Statistics              DIR
            Backup file         STRING  1     128   15h  0   RWDE iris_000035270000.mid.gz
            File size (Bytes)   DOUBLE  1     8     15h  0   RWDE 326345493
            KBytes copied       DOUBLE  1     8     15h  0   RWDE 0
            Total Bytes copied  DOUBLE  1     8     15h  0   RWDE 0
            Copy progress (%)   DOUBLE  1     8     15h  0   RWDE 0
            Copy Rate (Bytes perDOUBLE  1     8     15h  0   RWDE 0
            Backup status (%)   DOUBLE  1     8     15h  0   RWDE 0
            Number of Files     INT     1     4     15h  0   RWDE 247
            Current Lazy run    INT     1     4     15h  0   RWDE 35270000

Excerpt of lazy.log:
...
Wed May  6 17:26:00 2015 [Lazy_Dcache] Dcache[30] (cp:1.0s) iris_000032140000.mid.gz 6.146MB  file NEW
Wed May  6 17:26:02 2015 [Lazy_Dcache] Dcache[31] (cp:0.1s) iris_000032150000.mid.gz 22.894MB  file NEW
Wed May  6 17:26:04 2015 [Lazy_Dcache] Dcache[32] (cp:0.1s) iris_000032160000.mid.gz 116.110MB  file NEW
Wed May  6 17:26:07 2015 [Lazy_Dcache] Dcache[33] (cp:0.1s) iris_000032170000.mid.gz 110.228MB  file NEW
Wed May  6 17:26:09 2015 [Lazy_Dcache] Dcache[34] (cp:0.0s) iris_000032180000.mid.gz 101.333MB  file NEW
Wed May  6 17:26:12 2015 [Lazy_Dcache] Dcache[35] (cp:0.1s) iris_000032190000.mid.gz 90.928MB  file NEW
Wed May  6 17:26:14 2015 [Lazy_Dcache] Dcache[36] (cp:0.1s) iris_000032200000.mid.gz 88.461MB  file NEW
Thu May  7 15:47:02 2015 [Lazy_Dcache] Dcache[1] (cp:3.2s) iris_000032210000.mid.gz 87.862MB  file NEW
Thu May  7 15:47:06 2015 [Lazy_Dcache] Dcache[2] (cp:2.2s) iris_000032220000.mid.gz 74.789MB  file NEW
Thu May  7 15:47:10 2015 [Lazy_Dcache] Dcache[3] (cp:1.2s) iris_000032230000.mid.gz 0.204MB  file NEW
Thu May  7 15:47:16 2015 [Lazy_Dcache] Dcache[4] (cp:4.1s) iris_000032240000.mid.gz 105.346MB  file NEW
Thu May  7 15:47:20 2015 [Lazy_Dcache] Dcache[5] (cp:1.2s) iris_000032250000.mid.gz 14.048MB  file NEW
Thu May  7 15:47:23 2015 [Lazy_Dcache] Dcache[6] (cp:1.2s) iris_000032260000.mid.gz 5.011MB  file NEW
Thu May  7 15:47:30 2015 [Lazy_Dcache] Dcache[7] (cp:4.2s) iris_000032270000.mid.gz 94.028MB  file NEW
Thu May  7 15:47:36 2015 [Lazy_Dcache] Dcache[8] (cp:4.2s) iris_000032280000.mid.gz 110.765MB  file NEW
Thu May  7 15:47:42 2015 [Lazy_Dcache] Dcache[9] (cp:3.0s) iris_000032290000.mid.gz 88.982MB  file NEW
Thu May  7 15:47:46 2015 [Lazy_Dcache] Dcache[10] (cp:2.0s) iris_000032300000.mid.gz 51.735MB  file NEW

... Once the lazylogger has started a job on a data file, trying to terminate the application will result in producing a log message informing the user of the actual percentage of the backup completed so far. This message will repeat itself until completion of the backup, and only then the lazylogger application will terminate.

Retrieved from "https://daq00.triumf.ca/MidasWiki/index.php?title=Lazylogger&oldid=3025"