/System ODB tree
Creating the /System tree
The /System ODB tree is created automatically when the ODB is first created.
Purpose
The /System ODB tree contains information specific to each "MIDAS client" currently connected to the experiment. The sequence number appears in the ODB under the /System/Clients subtrees.
Example
The following example shows a typical /System ODB tree obtained using the odbedit ls command.
[local:midas:S]/System>ls -lr
Key name Type #Val Size Last Opn Mode Value
---------------------------------------------------------------------------
System DIR
Clients DIR
11781 DIR
Name STRING 1 32 1h 0 R ODBEdit
Host STRING 1 256 1h 0 R dasdevpc2.triumf.ca
Hardware type INT 1 4 1h 0 R 44
Server Port INT 1 4 1h 0 R 55904
Tmp DIR
Client Notify INT 1 4 1h 0 RWD 0
Prompt STRING 1 256 10h 0 RWD [%h:%e:%s]%p>
Keys in /System tree
The keys in the ODB /System tree are described in the following sections.
/System/Tmp subtree
/System/Client Notify
- Type: INT
- Default: 0
/System/Prompt
- Type: STRING
- Default: "[%h:%e:%s]%p>"
This key controls the format of the prompt of the odbedit utility. The default prompt is shown below
odbedit [local:midas:S]/>
The meanings of the prompt symbols are
%h Host name %e Experiment name %s Run state symbol (U,S,P,R i.e. unknown, stopped, paused, running) %p Current ODB path %t Current time
Changing the odbedit prompt
To set the odbedit prompt to show the long-form of the run state :
[local:midas:S]/System>set Prompt "[%h:%e:%S]%p>" [local:midas:Stopped]/System>
To set the prompt to the word "yes" :
[local:midas:Stopped]/System>set Prompt yes> yes>
To set the prompt to name the fields (i.e. Host, Expt, State, Path):
yes>set Prompt [Host:%h-Expt:%e:State:%s]Path:%p> [Host:local-Expt:midas-State:S]Path:/System>
To set the prompt to the current time:
[Host:local-Expt:midas-State:S]Path:/System>set Prompt "%t>" 13:29:08>
/System/Clients subtree
Each client is listed in this subtree under a <client number> subtree. The /System/Clients subtree reflects the system at a given time.
Example
The following example is of the /System/Clients subtree. More information has been added in green.
[local:midas:S]Clients>ls -lr Key name Type #Val Size Last Opn Mode Value --------------------------------------------------------------------------- Clients DIR 1832 DIR <------------ Frontend 1 Name STRING 1 32 21h 0 R ebfe01 Host STRING 1 256 21h 0 R pierre2 Hardware type INT 1 4 21h 0 R 42 Server Port INT 1 4 21h 0 R 2582 Transition START INT 1 4 21h 0 R 500 Transition STOP INT 1 4 21h 0 R 500 Transition PAUSE INT 1 4 21h 0 R 500 Transition RESUME INT 1 4 21h 0 R 500 RPC DIR 17000 BOOL 1 4 21h 0 R y 3872 DIR <------------ Frontend 2 Name STRING 1 32 21h 0 R ebfe02 Host STRING 1 256 21h 0 R pierre2 Hardware type INT 1 4 21h 0 R 42 Server Port INT 1 4 21h 0 R 2585 Transition START INT 1 4 21h 0 R 500 Transition STOP INT 1 4 21h 0 R 500 Transition PAUSE INT 1 4 21h 0 R 500 Transition RESUME INT 1 4 21h 0 R 500 RPC DIR 17000 BOOL 1 4 21h 0 R y 2220 DIR <------------ ODBedit doesn't need transition Name STRING 1 32 42s 0 R ODBEdit Host STRING 1 256 42s 0 R pierre2 Hardware type INT 1 4 42s 0 R 42 Server Port INT 1 4 42s 0 R 3429 568 DIR <------------ Event Builder Name STRING 1 32 26s 0 R Ebuilder Host STRING 1 256 26s 0 R pierre2 Hardware type INT 1 4 26s 0 R 42 Server Port INT 1 4 26s 0 R 3432 Transition START INT 1 4 26s 0 R 300 Transition STOP INT 1 4 26s 0 R 700 2848 DIR <------------ Logger Name STRING 1 32 5s 0 R Logger Host STRING 1 256 5s 0 R pierre2 Hardware type INT 1 4 5s 0 R 42 Server Port INT 1 4 5s 0 R 3436 Transition START INT 1 4 5s 0 R 200 Transition STOP INT 1 4 5s 0 R 800 Transition PAUSE INT 1 4 5s 0 R 500 Transition RESUME INT 1 4 5s 0 R 500 RPC DIR 14000 BOOL 1 4 5s 0 R y
Keys in the /System/Clients/<client number> subtree
/System/Clients/<client number>/Name
- Type: STRING
- Default:
Client name
/System/Clients/<client number>/Host
- Type: STRING
- Default:
This key reflect the Midas host name on which this client is running.
/System/Clients/<client number>/Hardware type
- Type: INT
- Default:
/System/Clients/<client number>/Server Port
- Type: INT
- Default:
/System/Clients/<client number>/Transition START
- Type: INT
- Default: 500 (depends on client)
Client sequence number for Start Transition.
If a permanent change of a client sequence number is required, the MIDAS system call cm_set_transition_sequence() can be used.
/System/Clients/<client number>/Transition STOP
- Type: INT
- Default: 500 (depends on client)
Client sequence number for Stop Transition.
If a permanent change of a client sequence number is required, the MIDAS system call cm_set_transition_sequence() can be used.
/System/Clients/<client number>/Transition PAUSE
- Type: INT
- Default: 500 (depends on client)
Client sequence number for Pause Transition.
If a permanent change of a client sequence number is required, the MIDAS system call cm_set_transition_sequence() can be used.
/System/Clients/<client number>/Transition RESUME
- Type: INT
- Default: 500 (depends on client)
Client sequence number for Resume Transition.
If a permanent change of a client sequence number is required, the MIDAS system call cm_set_transition_sequence() can be used.