Back Midas Rome Roody Rootana
  Midas DAQ System  Not logged in ELOG logo
Entry  14 Aug 2019, Stefan Ritt, Info, New history plot facility Screenshot_2019-08-14_at_8.50.53_.png
    Reply  06 Sep 2019, Andreas Suter, Info, New history plot facility label_issue.pngmany_labels.png
       Reply  06 Sep 2019, Stefan Ritt, Info, New history plot facility 
          Reply  06 Sep 2019, Andreas Suter, Info, New history plot facility plot_plus_minus.png
             Reply  07 Sep 2019, Stefan Ritt, Info, New history plot facility Screenshot_2019-09-07_at_13.52.49_.pngSlow-Sine_3-20198107-132905-20198107-135305.png
       Reply  08 Sep 2019, Stefan Ritt, Info, New history plot facility Screenshot_2019-09-08_at_12.29.12_.png
          Reply  10 Sep 2019, Andreas Suter, Info, New history plot facility history_hangs.PNG
             Reply  16 Sep 2019, Konstantin Olchanski, Info, New history plot facility 
                Reply  17 Sep 2019, Andreas Suter, Info, New history plot facility 
                   Reply  17 Sep 2019, Konstantin Olchanski, Info, New history plot facility 
    Reply  16 Sep 2019, Konstantin Olchanski, Info, New history plot facility 
       Reply  16 Sep 2019, Stefan Ritt, Info, New history plot facility 
Message ID: 1675     Entry time: 06 Sep 2019     In reply to: 1674     Reply to this: 1677   1678
Author: Andreas Suter 
Topic: Info 
Subject: New history plot facility 
> > 2) the background of a history plot is very handy if you only show one measure.
> > If you have multiple ones (see attachment 2), this is not the case anymore. It
> > would be nice if the background could be enabled/disabled.
> 
> Looking at your plot, even without the background things look messy. Please note
> that you can display only a single curve by double clicking on it (and back with Escape).
> If all curves are on top of each other, you can get them apart a bit by zooming
> in to the vertical axis, then double click. Let ma know if that works for you.

This I found out, yet the attachment here shows another case where it would be useful to be
able to disable the background, namely if you have positive and negative measures in one
plot. Somehow it suggests that CH1 and CH2 show very different values, whereas it is only a
difference in the sign of this variables.

It's not all the important but I would like to mention this is the early stage before
everything is fully frozen.
Attachment 1: plot_plus_minus.png  87 kB  Uploaded 06 Sep 2019  | Show | Show all
ELOG V3.1.4-2e1708b5