We stopped using tapes at Los Alamos a while ago.  The model we use is:

write data with mlogger to a local RAID system.  This is NFS mounted read only on teh analysis machines, and
becomes the working copy for most tasks.  Copy data to external hardrives.  We have been using USB.  The USB
system is sometime a little flaky (lnux 2.4.21-7, so we have a computer dedicated to this task.  The USB driver
can be reloaded, or if the user is not so knowledgeable, the copmuter can be rebooted.  users on this computer
have sudo privs, so they can format hard drives.  The disks are inserted into boxes while in use, and stored on
a shelf for data archival, so we don't have a lot of enclosures.

I use the automounter to mount and unmount the drives.  With a 10 second timeout, the user needs only to wait a
few seconds before unplugging the disk.  (cat /proc/mounts allows them to check if they want.) dmesg allows
them to find the drive letter.  This works for any device which appears later as a SCSI disk.  The automounter
manages /mnt/usb for vfat formatted devices, and /mnt/usbl for ext3 formatted devices (preferred for data
archiving).

autofs config files are:

/etc/auto.usb

# This is an automounter map and it has the following format
# key [ -mount-options-separated-by-comma ] location
# Details may be found in the autofs(5) manpage
 
*       -fstype=auto,nosuid,nodev,umask=0000,noatime    :/dev/&

/etc/auto.usbl

# This is an automounter map and it has the following format
# key [ -mount-options-separated-by-comma ] location
# Details may be found in the autofs(5) manpage
 
*       -fstype=auto,nosuid,nodev       :/dev/&

/etc/auto.master contains

/mnt/usb                /etc/auto.usb  --timeout=10
/mnt/usbl               /etc/auto.usbl --timeout=10


John.

> At triumf, we are developing a system to use removable hard drives to store data collected by midas 
> daq stations. The basic idea is to replace storage on 300 GB DLT tapes with storage on removable 
> esata, usb2 or firewire 750 GB hard drives.
> 
> To minimize culture shock, we stay as close as possible to the "tape" paradigm. Two removable disks 
> are used in tandem. Data is written to the first removable disk until it is full. Then midas automatically 
> switches to the second disk and asks the operator to replace the full disk with a blank disk. Similar to 
> handling tapes, the operator takes the full disk and stores it on the shelf (offline); takes a blank disk 
> and connects it to the computer. To read data from one of the disks, the operator takes the disk from 
> the shelf and connects it to the daq computer or to some other computer equipped with a compatible 
> removable storage bay. The full data disks are mounted read-only to prevent accidental data 
> modifications.
> 
> Two pieces of software are needed to implement this system:
> 
> 1) midas support for switching to alternate output disks as they become full. Data could be written to 
> the removable disk directly by the mlogger (no extra data copy on local disks) or by the lazylogger 
> (mlogger writes the data to the local disk, then the lazylogger copies it to the removable disk). Writing 
> directly to the removable disk is more efficient as it avoids the one extra data copy operation by the 
> lazylogger.
> 
> 2) a user interface utility for mounting and dismounting removable disks. Handling of removable disks 
> cannot be fully automatic: before unplugging a removable disk, the user has to inform the system; after 
> connecting a removable disk, the user has to tell the system to mount it read-only (for existing data), 
> read-write (to add more data) or to initialize a blank disk (fdisk+mkfs). (Also, some SATA interfaces do 
> not implement automatic hot-plug: they have to be manually told "please look for new disks").
> 
> We are presently evaluating various internal SATA hot-plug enclosures. We evaluated external eSATA 
> and USB2 enclosures and decided not to use them: while the performance is adequate, presence of 
> extra bulky components (eSATA and USB cables, non-standardized power bricks) and the extra cost of 
> eSATA and USB hard drive enclosures makes them unattractive.
> 
> I am open to suggestions and comments. I am most interested in hearing which data path (mlogger or 
> the lazylogger) would be most useful for other users.
> 
> K.O.