 28 Jun 2019, Konstantin Olchanski, Bug Report, Status page reloads every second
|
> We observed a strange behavior, from our point of view:
> ... the Midas status page started to reload/refresh every second
|
|
29 Jun 2019, Thorsten Lux, Bug Report, Status page reloads every second
|
I am sorry, yesterday evening I must have been a bit tired after a long day with a lot of
problems and error messages, so that I did not realize that yes, the frontend was finally
|
 03 Jul 2019, Lukas Gerritzen, Bug Report, mhttpd crashes when including nonexistent script in msequencer
|
Hi,
the subject line describes the project already
Suppose you have a file foo.msl. Somewhere in the file, you have the line
|
|
05 Jul 2019, Hassan, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
First of all thank you for all the assistance provided so far, especially making
changes to the code in CMakeList file previously for our configuration.I am not
sure whether this is an appropriate Elog for this matter but we are getting the
|
|
05 Jul 2019, Konstantin Olchanski, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
> /home/hh19285/packages/rootana/include/TRootanaEventLoop.hxx:24:25: fatal error:
> THttpServer.h: No such file or directory
> #include "THttpServer.h"
|
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
I wrote a c++ frontend to read data from CAEN VX1730 digitizers which is used in
parallel with the GRIFFIN frontend to read out DESCANT.
|
|
08 Jul 2019, Konstantin Olchanski, Bug Report, Frontend killed at stop of run
|
> After a long overnight run to check that the frontend runs smoothly for a longer
> time, I stopped the run and the frontend was killed by midas.
|
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> run the frontend inside gdb and post the stack trace after the crash?
>
> if there is no crash (the program is stopped by exit()), you may need
|
|
08 Jul 2019, Konstantin Olchanski, Bug Report, Frontend killed at stop of run
|
> > run the frontend inside gdb and post the stack trace after the crash?
> >
> > if there is no crash (the program is stopped by exit()), you may need
|
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > > run the frontend inside gdb and post the stack trace after the crash?
> > >
> > > if there is no crash (the program is stopped by exit()), you may need
|
|
08 Jul 2019, Konstantin Olchanski, Bug Report, Frontend killed at stop of run
|
> >
> > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack
> > trace. Is this what you see?
|
|
08 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > >
> > > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack
> > > trace. Is this what you see?
|
|
10 Jul 2019, Hassan, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
Hi, we have now done a clean install of Root and after some dynamic linking we have been able to make Rootana and analyzer. However we get an error when
we try to run analyzer.
--------------------------------------------------------------------------------------------------------------------------------------------------
|
|
10 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > > >
> > > > For SIGKILL, my gdb reports "Program terminated with signal SIGKILL, Killed." and there is no stack
> > > > trace. Is this what you see?
|
|
10 Jul 2019, Stefan Ritt, Bug Report, mhttpd crashes when including nonexistent script in msequencer
|
The bug has been fixed. It was actually in the mxml library. So you have to go to the midas/mxml
subdirectory and update that one via "git pull origin master".
|
|
10 Jul 2019, Konstantin Olchanski, Bug Report, Frontend killed at stop of run
|
> ... finding a current midas.log file
On the "help" page, see "midas.log".
|
|
10 Jul 2019, Konstantin Olchanski, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
>> [hh19285@it038146 ~]$ which root-config
> /software/root/v6.06.08/bin/root-config
> [hh19285@it038146 ~]$ root-config --cflags
|
|
11 Jul 2019, Stefan Ritt, Bug Report, Header files missing when trying to compile rootana, roody and analyzer
|
> You can confirm that you are linking against the correct ROOT by running cmake with VERBOSE=1
> and examine the linker command line to see what library link path is specified for ROOT.
|
|
11 Jul 2019, Vinzenz Bildstein, Bug Report, Frontend killed at stop of run
|
> > ... finding a current midas.log file
>
> On the "help" page, see "midas.log".
|
|
11 Jul 2019, Konstantin Olchanski, Bug Report, Frontend killed at stop of run
|
> Wed Jul 10 06:23:58 2019 [mhttpd,ERROR] [system.c:4580:ss_recv_net_command,ERROR] timeout receiving network command header
> Wed Jul 10 06:23:58 2019 [mhttpd,ERROR] [midas.c:10322:rpc_client_call,ERROR] call to "fedescant" on "grsmid00.triumf.ca" RPC "rc_transition": timeout
waiting for reply
|